• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.5 no.5
• /
• pp.461-470
• /
• 2015

There has been a significant increase in the amount of research on reducing the lighting power consumption of buildings and also an increasing demand for technological development. Light shelf has been recognized as one of the most efficient solutions to this issue and related researches have been conducted, which have mostly focused on factors related to simple light shelves and are not suitable as an appropriate basis for the design of light shelves. Thus this study aims to establish the proper design basis for light shelves by evaluating the performance of shelves per reflection rate in indoor areas. Power consumption rate and indoor illumination intensity distribution of a testbed built based on actual living conditions were calculated for the performance evaluation, of which the results are as following: 1) Reduction of reflection rate of ceiling and walls caused average illumination intensity in summer, winter and median seasons, and evenness per reflection rate of indoor areas was found to be different in summer, winter and median seasons, making it a necessary consideration for designing light shelves. 2) Calculation of power consumption from lighting control showed that a high reflection rate of indoor areas may be suitable for power consumption reduction, and that reflection rates higher than 80% for ceilings and higher than 75% for walls in terms of the efficiency of researches on the indoor reflection rate and its application would be appropriate. This study is meaningful as the research focuses on light shelves based on considering indoor environmental factors. More studies will be required that consider a variety of factors.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.3
• /
• pp.477-496
• /
• 2017

A drastic development of modern cities and transportation means as part of a rapid industrialization and urbanization for the past half-century has consistently broaden the boundaries of urban dwellers while, at the same time, raising issues as to establishing relationships among them throughout the society following the materialization of modern urban planning. Within the framework of the postmodern concept, there have been consistent efforts to create a community space in appropriate size and, in particular, the concept of New Urbanism and Urban Village that emerged in mid 1800s along with the effort to build a community by building an ideal city provides an important meaning today when people are seeking to restore a healthy community. Against this backdrop, this study aims to explore the concept of community and to determine its optimal scope of implementation in the sense of healing environment under the premise that organizing a healthy city is based on building a solid urban community. The study findings and conclusions are as follows. First, a community is a subject of constant consideration in the process of historical development of the city and has required us to take a variety of strategic approaches and to determine the scope of implementation. Second, the activities of a healthy community have been conducted under various types of environments, including churches, commercial facilities, urban plazas, parks, and streets in various scales, reflecting their unique characteristics. Third, in the process of designing a healthy and sustainable city, determination of location carries significant implications along with building a community of appropriate size, which requires multidisciplinary considerations in addition to functional approaches. Fourth, the composition and design of a modern urban community need to seek practical ways of its implementation within the concept of healing environment.

• The Korean Journal of Franchise Management
• /
• v.9 no.3
• /
• pp.19-29
• /
• 2018

Purpose - Due to the increase in coffee consumption and competition, domestic coffee franchise companies are currently entering the overseas market. Therefore, coffee franchise companies are pursuing a variety of marketing strategies to meet customer needs and gain competitive advantage in overseas markets. From this perspective, overseas franchise companies need to ensure that their servicescapes meet the needs of their overseas customers. For these purposes, the study is to identify the impact servicescapes on customer satisfaction and customer loyalty focused on Global Coffee Franchise Company "C", which extended its business worldwide in Mongolia. Research design, data, and methodology - The data were collected from customers who had visited the stores of 'C' company in Ulaanbaatar, Mongolia. 435 valid questionnaires collected through online survey coded and analyzed using frequency, confirmatory factor analysis, correlations analysis, and structural equation modeling with SPSS 24 and SmartPLS 3.0. Result - Firstly, seating comfort, facility aesthetics, and cleanliness, ambient conditions among servicescapes influenced customer satisfaction. Secondly, servicescapes didn't affect the loyalty directly. Third, customer satisfaction had positive effect on loyalty. Fourthly, cleanliness which was ranked lower in Korea had a great effect on customer satisfaction in Mongolia. Fifthly, IPMA(Importance-performance map analysis) shows that the importance of servicescapes is higher for women than for men, and facility aesthetics for female and cleanliness is the most important for male. Conclusions - The results of this study show that there is a positive (+) effect on customer satisfaction in order of cleanliness, ambient conditions, aesthetics, and seating comfort. Therefore, franchise companies considering or advancing into Mongolia should consider importance in order of cleanliness, ambient conditions and aesthetics when entering Mongolia market. For example, franchise managers should select Monday as a "clean day," and all merchants should spend all of their open hours and keep their stores clean in accordance with the head office manual. In addition, franchise managers need to hire a VMD (visual merchandising) experts to build up a physical environment that will effectively highlight the space-specific display of the store so that Mongolian local customers can have a satisfactory climate and aesthetics. And, the IMPA analysis between servicescapes and customer satisfaction shows that women are more susceptible to servicescapes than men. Especially, in the case of women, the importance of esthetics is high, but the performance is low. Thus, if the aesthetics are actively improved, customer satisfaction can be effectively increased.

• Convergence Security Journal
• /
• v.22 no.5
• /
• pp.21-35
• /
• 2022

The use of digital information according to the development of information and communication technology and the 4th industrial revolution is continuously increasing and diversifying, and in proportion to this, crimes using digital information are also increasing. However, there are few cases of establishing an environment for processing and analysis of digital evidence in Korea. The budget allocated for each organization is different and the digital forensics laboratory built without solving the chronic problem of securing space has a problem in that there is no standard that can be referenced from the initial configuration stage. Based on this awareness of the problem, this thesis conducted an exploratory study focusing on tools and equipment necessary for building a digital forensics laboratory. As a research method, focus group interviews were conducted with 15 experts with extensive practical experience in the digital forensic laboratory or digital forensics field and experts' opinions were collected on the following 9 areas: network configuration, analyst computer, personal tools·equipment, imaging devices, dedicated software, open source software, common tools/equipment, accessories, and other considerations. As a result, a list of tools and equipment for digital forensic laboratories was derived.

• Analytical Science and Technology
• /
• v.21 no.2
• /
• pp.93-101
• /
• 2008

The application of solid phase microextraction (SPME) is generally conducted by directly immersing the fiber into the liquid sample or by exposing the fiber in the head space (HS). The extraction temperature, the time of incubation, and application of stirring are often designated to be the most important parameters for achieving the best extraction efficiencies of HS-SPME analysis. In this study, relative importance of these three analytical parameters involved in the HS-SPME method is evaluated using a polydimethylsiloxane/carboxen (PDMS/CAR) fiber. To optimize its operation conditions the competing relationships between different parameters were investigated by comparing the extraction efficiency based on the combination of three parameters and two contracting conditions: (1) heating the sample at 30 vs. 50 C, (2) exposing samples at two durations of 10 vs. 30 min, and (3) application of stirring vs. no stirring. According to our analysis among 8 combination types of HS-SPME method, an extraction condition termed as S50-30 condition ((1) 1200 rpm stirring, (2) $50^{\circ}C$ exposure temp, and (3) 30 min exposure duration) showed maximum recovery rate of 45.5~68.5% relative to an arbitrary reference of direct GC injection. According to this study, the employment of stirring is the most crucial factor to improve extraction efficiency in the application of HS-SPME.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.6B
• /
• pp.551-560
• /
• 2009

This paper describes a newly developed pollutant transport model named ARPTM which was designed to simulate the transport and characteristics of pollutant materials after an accidental spill in upstream of river system up to a given position in the downstream. In particular, the ARPTM incorporated ADCP data to compute longitudinal dispersion coefficient and advection velocity which are necessary to apply one-dimensional advection-dispersion equation. ARPTM was built on top of the geographic information system platforms to take advantage of the technology's capabilities to track geo-referenced processes and visualize the simulated results in conjunction with associated geographic layers such as digital maps. The ARPTM computes travel distance, time, and concentration of the pollutant cloud in the given flow path from the river network, after quickly finding path between the spill of the pollutant material and any concerned points in the downstream. ARPTM is closely connected with a recently developed GIS-based Arc River database that stores inputs and outputs of ARPTM. ARPTM thereby assembles measurements, modeling, and cyberinfrastructure components to create a useful cyber-tool for determining and visualizing the dynamics of the clouds of pollutants while dispersing in space and time. ARPTM is expected to be potentially used for building warning system for the transport of pollutant materials in a large basin.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.108-109
• /
• 2022

In this study analyzed experimental data on noise interference caused by engine operating apply surface wave communication in the engine room. For the experiment, 7 areas of the engine room on 256 ton tug boat and measured noise during engine on off using signal analyzer for effect surface wave communication. In order to construct and actual communication network based on the analysis of the noise and confirm the characteristics of surface wave communication in the area made metal bulkheads the actual communication network installed communication equipment between three metal bulkheads and conducted a comparative experiment with wireless communication. The difference was confirmed. As a result, in the case of surface wave communication, there was no significant difference in the transmission and reception rates before and after engine operation in an environment with three bulkheads, but in the case of Wi-Fi using wireless, the performance deteriorated significantly during operation. was confirmed. As a result of analyzing the experimental data, it was confirmed that noise caused by engine operation affects wireless communication but does not affect surface wave communication. Therefore, even in the area with a lot of electromagnetic wave noise in the ship, when the surface wave communication system is configured using the ship's metal structure, it is possible to replace the wireless communication and furthermore, it is possible to apply the surface wave communication in the enclosed space and the engine room in the ship.

• Journal of Korean Library and Information Science Society
• /
• v.54 no.3
• /
• pp.57-80
• /
• 2023

The purpose of this study is to examine the current status of university library operation through the five laws of library science and suggest ways to improve it. To this end, the operation status of four national and public university libraries was analyzed with the scope of the study as the Busan area. Furthermore, for an in-depth investigation, the P University library in Busan was examined as a case. The operation status of national and public university libraries in the Busan region was analyzed by dividing them into the categories of university library collection materials, facilities, staff, material purchase costs, and users from 2018 to 2022. In particular, there was a decrease in users and a shortage of librarians due to COVID-19. In the case study, the operation status of P University library was investigated focusing on the first and fifth laws of Ranganathan's five laws of library science. In the first law, the study was conducted on the aspects of access to and use of the collection, library location, usage time and book lending, and staff. In the fifth law, the investigation was divided into service improvement aspects according to changes in digital technology of P University library and library environment improvement aspects according to changes in user characteristics. As a result of the study, 'establishment of library space composition strategy', 'establishment of blue ocean strategy', and 'expansion of recruitment and deployment of librarians' were suggested as improvement plans.

• Journal of the Korea Computer Graphics Society
• /
• v.29 no.5
• /
• pp.1-9
• /
• 2023

The control technology of animatronics is an interesting topic explored in various fields, including engineering, medicine, and art, with ongoing research efforts. The conventional method for controlling the movement of animatronics is to use electric motors installed inside the body. However, this method is difficult to apply when expressing a narrow space inside the body. In this study, a method of using external forces instead of installing mechanical devices inside the body was proposed to control the movement of a thin and long tentacle organism. Specifically, in this study, the joint body of animatronics was made of magnetic metal material so that it could be affected by the force of an externally installed electromagnet. The strength of the electromagnet was controlled by a PID controller to enable real-time control of the position of the animatronics body. In addition, the magnet was made to rotate, and the speed of rotation was changed to create various movements. Through virtual environment simulations, our experiments demonstrate the superiority of the proposed method, showcasing real-time control by users and the creation of animations in various styles.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.35 no.6
• /
• pp.128-137
• /
• 2023

In this study, the bearing pressure on the rubble mound of a gravity-based harbor structure with an arbitrarily shaped bottom was targeted. Assuming that the bottom of the structure is a rigid body, the rubble mound was modeled as a linear spring uniformly distributed on the bottom that resists compression only, and the bearing pressure evaluation formula was derived. It was confirmed that there were no errors in the derivation process by showing that when the bottom was square, the derived equation was converted to the equation used in the design. In addition, the validity of the derived equation was proven by examining the behavior and convergence value of the bearing pressure when an arbitrarily shaped bottom converges into a square one. In order to examine the adequacy of the method used in the current design, the end bearing pressure for the pre-designed breakwater cross-section was calculated and compared with the values in the design document. As a result, it was shown that the method used for design was not appropriate as it gave unsafe results. In particular, the difference was larger when the eccentricity of the vertical load was large, such as in the case of extreme design conditions.