• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.6
• /
• pp.69-78
• /
• 2017

Shannon of the 5G smartphone and Fourier of the signal processing meet in the sampling theorem (2 times the highest frequency 1). In this paper, the initial Shannon Theorem finds the Shannon capacity at the point-to-point, but the 5G shows on the Relay channel that the technology has evolved into Multi Point MIMO. Fourier transforms are signal processing with fixed parameters. We analyzed the performance by proposing a 2N-1 multivariate Fourier-Jacket transform in the multimedia age. In this study, the authors tackle this signal processing complexity issue by proposing a Jacket-based fast method for reducing the precoding/decoding complexity in terms of time computation. Jacket transforms have shown to find applications in signal processing and coding theory. Jacket transforms are defined to be $n{\times}n$ matrices $A=(a_{jk})$ over a field F with the property $AA^{\dot{+}}=nl_n$, where $A^{\dot{+}}$ is the transpose matrix of the element-wise inverse of A, that is, $A^{\dot{+}}=(a^{-1}_{kj})$, which generalise Hadamard transforms and centre weighted Hadamard transforms. In particular, exploiting the Jacket transform properties, the authors propose a new eigenvalue decomposition (EVD) method with application in precoding and decoding of distributive multi-input multi-output channels in relay-based DF cooperative wireless networks in which the transmission is based on using single-symbol decodable space-time block codes. The authors show that the proposed Jacket-based method of EVD has significant reduction in its computational time as compared to the conventional-based EVD method. Performance in terms of computational time reduction is evaluated quantitatively through mathematical analysis and numerical results.

• Journal of Korean Academy of Nursing
• /
• v.4 no.1
• /
• pp.38-49
• /
• 1974

Presently, the performance level of the college student has received a great deal of attention, particularly in the area of professional education. The problem of under achievement, especially in areas dealing with science and technology, has gone through considerable investigation by numerous Psychologists and Educators. Thus for, however, they have not been successful in determining conclusively the non-intellectual factors involved. The maladjustment problem of these students has been a thorn in the side of nursing education for some time. This topic has been discussed among nursing educators without any tangible results. Furthermore, the fact that the number of students who withdraw from nursing education programs before graduation has increased. This represents a major problem for nursing education. This problem area had increased attention drawn to it on October 1957, when Russia successfully launched to first satellite "Sputnik" into space. Various studies seem to indicate that factors related to over achievement and under.achievement can be found in the motivation of the students. This study is aimed at testing 3 hypotheses which hopefully will lead to a better understanding of the learning activities of nursing students and to determine some of their nonintellectually personality traits. Hypothesis I: learning activities in nursing students and persona1ity are correlated, there will be significant differences in personality need structures between 4 classes of nursing collegiate students. Sub-hypothesis: There will also be significant differences in the degree of student satisfaction in her major subject. Hypothesis I: If there is a special personality need structure which is required for the clinical learning activity in general, then there will be significant differences between the personality need structures of under-achievers and overachiever. Hypothesis II : If each clinical nursing subject requires different personality need structures, then there will be differences in personality need structure between the different clinical groups Methodology: 1. Tool: A Korean translation and correction of the Edwards Personal Preference Schedule of U.S.A. was used. 2. Subject and Test Method: Subjects were nursing students at Yonsei University, who enrolled for Fall semester of 1971. The Researcher herself executed the test for the test for the class as a group, and the absent students were tested indidually. Out of 307 students, 293 students (95.4%) were reported. 3. Statistical treatment: The mean and standard deviation for each of the 15 personality need variables were computed and the value of T-test was obtained to determine the differences in the personality need structures between each group. Results: 1, For the first hypothesis, the personality need structures between each of the 4 classes and the reported degree of satisfaction in major subject showed significant differences. Therefore the hypothesis I was accepted. 2. The comparison of personality need structure of under-achievers and over-achievers in clinical fields showed significant differences. Thus hypothesis II was accepted. 3. Personality need structure between clinical subject groups showed significant differences therefore the 3rd hypothesis was accepted.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.4
• /
• pp.196-205
• /
• 2017

In recent years, the service design in the medical sector evolves through practical service research and development that can visualize both intangible and intangible service elements in an integrative way and derive innovative solutions to help customers feel the service more important value. With the improvement of personal income, interest in medical welfare and well-being is increasing day by day, and the focus of the medical sector shifts from the concept of treatment of diseases and illness to preventive medicine. In response to this trend, research and development of home health care system, which greatly reduces the time and space constraint of health checkup and health care by combining ubiquitous concept with medical welfare, are being actively conducted, and the needs for improving products and medical environment based on user-centered medical service and user needs in accordance with the Health Care 3.0 Era, it becomes necessary to develop on-site medical diagnostic products that reflect user-centered needs and needs. This study is intended to research and develop a product that sufficiently reflects the needs of users by applying suitable materials and shape for on-site diagnostic product in researching and developing Wireless X-ray Detector.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.277-280
• /
• 2015

Smishing, Phishing personal privacy caused by Incident accidents such as Phishing information security has become a hot topic. Such incidents have privacy in personal information management occurs due to a lack of user awareness. This paper is based on the existing structure of the XML Tag question bank used a different Key-Value Structure-based JSON. JSON is an advantage that does not depend on the language in the text-based interchange format. The proposed system is divided into information security sector High, Middle and Low grade. and Provides service to the user through the free space and the smart device and the PC to the constraints of time. The use of open source Apache Load Balancing technology for reliable service. It also handles the user's web page without any training sessions Require server verification result of the training(training server). The result is sent to the training server using jQuery Ajax. and The resulting data are stored in the database based on the user ID. Also to be used as a training statistical indicators. In this paper, we design a level training system to enhance the user's information security awareness.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.6
• /
• pp.505-512
• /
• 2016

Even though high performance concrete was developed according to the trend of bigger and higher of reinforced concrete building, the rheological evaluations such as viscosity, yield stress are not enough to use as input data to accomplish the numerical analysis for the construction design. So there are many problems in the harden concrete such as poor compaction, rock pocket and crack, etc. in the field. In this study, consistency curves were measured by the viscometer as hydration reaction time passed. At the same time the slump flow test and Vicat setting test were carried out for comparing with the results of rheological properties. The fluidity of the W/B 30% decreased as the increase of replacement ratio of blast furnace slag. But in case of W/B 40%, the replacement ration did not significantly influenced to the slump flow value with the passage of hydration time. By the replacement of blast furnace slag to cement, initial setting was delayed and the time gap between initial and final setting became shorten. Through the regression analysis using Bingham model, there are a sudden changes of viscosity and yield stress around initial setting in case of low W/B 30%. The increase of workability by the change of free water in cement paste was offset by the coating effect of impermeable layer in case of W/B 40%.

• Journal of the Korea Computer Graphics Society
• /
• v.24 no.2
• /
• pp.21-28
• /
• 2018

We present interactive methods for visualizing the cloud height data and the backscatter data collected from ceilometers in the three-dimensional virtual space. Because ceilometer data is high-dimensional, large-size data associated with both spatial and temporal information, it is highly improbable to exhibit the whole aspects of ceilometer data simply with static, two-dimensional images. Based on the three-dimensional rendering technology, our visualization methods allow the user to observe both the global variations and the local features of the three-dimensional representations of ceilometer data from various angles by interactively manipulating the timing and the view as desired. The cloud height data, coupled with the terrain data, is visualized as a realistic cloud animation in which many clouds are formed and dissipated over the terrain. The backscatter data is visualized as a three-dimensional terrain which effectively represents how the amount of backscatter changes according to the time and the altitude. Our system facilitates the multivariate analysis of ceilometer data by enabling the user to select the date to be examined, the level-of-detail of the terrain, and the additional data such as the planetary boundary layer height. We demonstrate the usefulness of our methods through various experiments with real ceilometer data collected from 93 sites scattered over the country.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.4
• /
• pp.64-72
• /
• 2008

Researchers nowadays are trying to implement u-Healthcare (ubiquitous Healthcare) systems for real-time monitoring and analysis of patients' status through a low-cost and low-power wireless sensor network. u-Healthcare system has an aim to provide reliable and fast medical services for patients regardless of time and space by transmitting to doctors a large quantity of vital signs collected from sensor networks. Existing u-Healthcare systems can merely monitor patients' health status. However, it is not easy to derive physiologically meaningful results by analyzing rapidly vital signs through the existing u-Healthcare systems. We introduce a Grid computing technology for deriving the results by analyzing rapidly the vital signs collected from the sensor network. Since both sensor network and Grid computing use different protocols, a gateway is needed. In addition, we also need to construct a gateway which includes the functions such as an efficient management and control of the sensor network, real-time monitoring of the vital signs and communication services related to the Grid network for providing u-Healthcare services effectively. In this paper, to build an advanced u-Healthcare system by using these two technologies most efficiently, we design and present the results to implement a SensorGrid gateway which connects transparently the sensor network and the grid network.

• Journal of the Korean earth science society
• /
• v.18 no.6
• /
• pp.553-558
• /
• 1997

Colorless and transparent cubic zirconia($Zr_{0.73}Y_{0.27}O_{1.87}$) crystal has been synthesized by the Bridgman-Stock-bager method(also called Skull melting method). $Y_2O_3$ is used as stabilizer. The crystal shows a vitreous luster with a slight oily appearance. Under a polarizing microscope, it shows isotropic nature with no appreciable anisotropism. Mohs hardness value is measured to be $8{\sim}8\frac{1}{2}$ and specific gravity 5.85. Under ultraviolet light it shows a faint white glow. The crystal structure of yttria stabilized zirconia was determined, using single crystal X-ray diffraction techniques to be a cubic symmetry, space group $Fm\overline{3}m({O^5}_h)$ with $a=5.1552(5){\AA}$, $V=136.99(5){\AA}^3$, Z=4, and R=0.0488 for 29 unique reflections. Each zirconium atom is at the center of eight oxygen atoms situated at the corners of a surrounding cube and each oxygen atom is at the center of a tetrahedron of zirconium atoms. So a coordination of 8:4 holds in the structure.

• Spatial Information Research
• /
• v.23 no.4
• /
• pp.57-66
• /
• 2015

At these day, owing to functional limitations and cost issues, used image map in web service have a problem which can not make exactly meet the user needs. This study aims to create an individual map for user suitable purposes using HTML5 technology that implement the vector map creation and its functions with services. The results of this study, the invisible problems of the tilting and rotation functions in image-based map utilizing the existing web environment were solved in HTML5 vector map. And to access the map information, by implementing the function of expressing the background and name data to selectively derive, various results were expressed in the map. Also, as a result of a comparison of performance the time required was measured at 0.88sec which comes in the range of the first loading time between 0.78sec and 7.56sec in a commercial map service, which showed the possibility of its commercialization. compared to 180GB of image maps for the production of a national map index system, the volume to produce a vector map was 2.5GB, a decrease by over 90%, which solved the issue of costs for a storage space. As a result, this study of HTML5 vector map design and implementation presented a plan for providing information suitable for the requirements of the users who use spatial information through utilizing a variety of information and expanding functions.

• The Journal of Advanced Prosthodontics
• /
• v.6 no.2
• /
• pp.71-78
• /
• 2014

PURPOSE. The objective of this study was to evaluate the clinical acceptability of all-ceramic crowns fabricated by the digital veneering method vis-$\grave{a}$-vis the traditional method. MATERIALS AND METHODS. Zirconia specimens manufactures by two different manufacturing method, conventional vs digital veneering, with three different thickness (0.3 mm, 0.5 mm, 0.7 mm) were prepared for analysis. Color measurement was performed using a spectrophotometer for the prepared specimens. The differences in shade in relation to the build-up method were calculated by quantifying ${\Delta}E^*$ (mean color difference), with the use of color difference equations representing the distance from the measured values $L^*$, $a^*$, and $b^*$, to the three-dimensional space of two colors. Two-way analysis of variance (ANOVA) combined with a Tukey multiple-range test was used to analyze the data (${\alpha}$=0.05). RESULTS. In comparing means and standard deviations of $L^*$, $a^*$*, and $b^*$ color values there was no significant difference by the manufacturing method and zirconia core thickness according to a two-way ANOVA. The color differences between two manufacturing methods were in a clinically acceptable range less than or equal to 3.7 in all the specimens. CONCLUSION. Based on the results of this study, a carefully consideration is necessary while selecting upper porcelain materials, even if it is performed on a small scale. However, because the color reproducibility of the digital veneering system was within the clinically acceptable range when comparing with conventional layering system, it was possible to estimate the possibility of successful aesthetic prostheses in the latest technology.