• Earthquakes and Structures
• /
• v.23 no.4
• /
• pp.339-352
• /
• 2022

Due to the large volume and generally as a public building, the damage of large-span space structures under various non-conventional loads will cause greater economic losses, casualties, and social impacts, etc. Therefore, it is particularly important to evaluate the seismic performance of large-span space structures. This paper taked a multipurpose sports center as an example and considered its synergistic deformation based on the method of equivalent damping ratio. Furthermore, The ABAQUS software was used to analyze the time-history and energy response of the multipurpose sports center under the action of rare earthquakes, and proposed a quantitative damage index to assess the overall damage of the structure. Finally, the research results indicated that the maximum inter-story drift ratio of the multipurpose sports center under the action of rare earthquakes was less than its limit value. The frame beams presented different degrees of damage, but the key members were basically in an elastic state. The bearing capacity did not reach the limit value, which satisfied the intended seismic performance target. This study taked an actual case as an example and proposed a relevant damage evaluation system, which provided some reference for the analysis of the seismic performance of large-span space structures.

• Phonetics and Speech Sciences
• /
• v.4 no.3
• /
• pp.161-169
• /
• 2012

The purpose of this study was to investigate the characteristics of speech intelligibility of spontaneous speech and the vowel space parameters in patients with Parkinson's disease. Ten PD patients (M=5, F=5) and a corresponding control group of ten normal adults participated in this study. Firstly, subjects were asked to tell a story about their hometown and youth in order to analyze speech intelligibility. Secondly, the subjects were also asked to repeat four vowels (/a/, /i/, /u/, /e/) five times in order to compare their vowel spaces. The results were as follows: (1) the speech intelligibility of the PD group was lower than that of the control group. (2) Four parameters including vowel area, vowel articulatory index, formant centralization ratio, F2i/F1u ratio were significantly different in each group. For instance, vowel area and F2 ratio were wider and higher, respectively. As a result, a decrease in speech intelligibility of patients with PD is likely to show different types of errors from the normal group. The results of this research are meaningful in a sense that they could provide the objective standard of speech intelligibility and vowel space parameters.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.23 no.3
• /
• pp.105-119
• /
• 2020

The purpose of this study is to analyze the hydrologic cycle environment of Gyeongui Line Forest Park, a linear city park, in order to improve hydrologic cycle systems in urban areas. The method of the study is the Biotope Area Ratio and the Permeable ratio survey. The study subject is the Gyeongui Line Forest Park, created in 2016 as a linear park in Seoul. The results showed that the Biotope Area Ratio improved by 31.2% (31,927㎡) from 35.7% (36,480㎡) in 2000 to 66.9% (68,407㎡) in 2019 on a site area of 102,117㎡. Next, the Permeable ratio improved by 43.8% from 29.0% to 72.8%, and the impermeable ratio decreased by 43.8% from 71.0% to 27.2%. The Biotope Area Ratio exceeded the target ratio of 60% by 6.9%, set by the Ministry of Environment. The ratio of green space exceeded the target ratio of 60%, by 4.0%. And so they contributed to the improvement of the hydrologic cycle by the creation of the Gyeongui Line Forest Park. Urban parks need to exceed the Biotope Area Ratio and the green area ratio of the legal standards, especially when creating large parks of over 100,000 square meters, in the era of climate change. It is necessary to continuously plant trees in the space where trees can be planted, and to contribute to the improvement of the hydrologic cycle system and urban heat island effect by conducting three-dimensional.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.18 no.1
• /
• pp.53-68
• /
• 1990

The purpose of this study was to establish the more rational and practical basic theory for the landscape planning in the aparment complex. In this study, the actual conditions of exterior space, the residens' satisfaction degree and the correlation between exterior space and the residents' satisfaction defree were investigated and analyzed on the 13apartment complexes in Taegu City. Through the statistical analysis, the main results were obtained as fellows : It was found that the size of green area ratio in the apartment complexes were in the order of Jugong Apt. (Korean Housing Corporation), Siyoung Apt. (City Operation), Minyoung high-rise Apt. (Private Business) and Minyoung low-rise Apt. (Private Business) complex. The highest ratio of footway and Parking area were shown in Minyoung high-rise Apt. complex. The important factors at the exterior space of apartment complex were composed by 6 major factors, importance degrees of which are Visual, Practical, Convenient, Sentimental, Recreational and Spatial factors for teenagers in orders. The residents' satisfaction degrees to the exterior space were highly correlated with the spatil organization, size of green area and quantity of trees, view, management situation, defensibility of outside noise, rest place, water landscapings by turns. In order to get more than the average satisfaction degree 18 exterior space, the green area should be occupied by 35% of the apartment complex area and more than 76% of the green area (i. e. 16% of the apartment complex area) should be planted with trees. In the Taegu City regulation, the ratio of tree composition is proposed for only the number of tree. But it was shown that the satifaction degree are more correlated with the species and afforestation of trees than the nuts her of trees in this study. therefore, the species of tree and the afforestation of tree should be considered when the landscape planning of the apartment complex begins. It was found that the ratio of afforestation to make the more desirable exterior space In the apartment complex shoule be 8 to 2 in the ratio of arbor to shrub. It was also required that 30 species of arbor and 15 species of shrub should be planted for the more desirable landscape of the apartment complex.

• The korean journal of orthodontics
• /
• v.14 no.2
• /
• pp.233-239
• /
• 1984

The author studied on the tongue position, tongue space and intermaxillary space at 4 groups; normal occlusion 30 cases, Angle's Class I bimaxillary protrusion 29 cases, Angle's Class II malocclusion 26 cases, Angle's Class III malocclusion 26 cases. This study used the data from cephalometric films of female subject aged from 16 to 23 years. Following results were obtained; 1. Dorsal height in Angle's Class III malocclusion was greater than normal occlusion. 2. Anterior Intermaxillary Height in Angle's Class I bimaxillary protrusion and Angle's Class III malocclusion was greater than normal occlusion. 3. Tongue space in Angle's Class I bimaxillary protrusion was greater than normal occlusion. 4. The ratio of the tongue space to the intermaxillary space (T.S./I.S.) in Angle's Class II malocclusion was greater and the ratio in Angle's Class III malocclusion is lesser than normal occlusion.

• Journal of Environmental Science International
• /
• v.23 no.7
• /
• pp.1349-1358
• /
• 2014

This study suggests plan of green space management based on the result of research apprehending the characteristic through sorting types of city thermal environment targeting summer which thermal pollution is the most serious. Considering anthropogenic heat, development level of wind road, thermal environment, as a result of types of thermal environment process, it is appeared 36 types, and 10 types is relevant of this research subject. Type I-1, size of building is large, artificial covering area is wide, and thermal load of anthropogenic heat is high, type II-1, development condition of wind road is incomplete as IIlevel, entering cold air is difficult and thermal management and improvement is needed area. Type III-1, scale is large and it is area of origin of cold air, development level of wind road is mostly favorable, type III-2 is revealed as smaller scale than III-1, and small area of origin of cold air. Type IV, anthropogenic heat is $81{\sim}150W/m^2$, average, but development function of wind road is very favorable. Type V, large area of thermal load and the origin of cold air are distributed as similar ratio, and level of development function of wind road is revealed as II level. According to standard of type classification of thermal environment, as a result of suggesting plan of green space management and biotops area ratio, type I-1 is buffer green space and waterway creation, goal biotops area ratio 35%, type II-1 afforestation in site and goal biotops area ratio 40%, type III-1, preservation plan to display the current function continuously is requested. Type IV suggests afforestation of stream current, and type V suggests quantitative increase of green space and goal biotops area ratio 45%.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.6
• /
• pp.102-108
• /
• 2001

This paper addresses an analytical approach to the mechanical error analysis of gear train and tolerance design and manufacture of gear train in restricted space considering motor driving torque, driving system inertia, motor acceleration, motor rotor inertia and friction torque. The gear train is designed to have optimum gear ratio in restricted space and each gear is manufactured to have the lowest weight and each gear tooth is heat-treated to have robustness. Based on the small difference between the mechanical error analysis and measurement, gear train design with optimum gear ratio and restricted space and robustness is proposed.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.2 no.1
• /
• pp.132-138
• /
• 1999

This paper addresses an analytical approach to the mechanical error analysis of gear train and tolerance design and manufacture of gear train in restricted space considering motor driving torque, driving system inertia, motor acceleration, motor rotor inertia and friction torque. The gear train is designed to have optimum gear ratio in restricted space and each gear is manufactured to have the lowest weight and each gear tooth is heat-treated to have robustness. Based on the small difference between the mechanical error analysis and measurement, gear train design with optimum gear ratio and restricted space and robustness is proposed

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.3
• /
• pp.206-213
• /
• 2002

In this paper, the flow characteristics of an axial fan spraying isothermal compact jet in a confined space were investigated by the experimental methods, the numerical method, and the free jet theory According to the results, the numerical result and the experimental result are agreed well qualitatively and different quantitatively within $\pm1.0%$ for the centerline velocity, the entrainment ratio, and the maximum throw. However, the free jet theory can reasonably predict the centerline velocity except the entrainment ratio and the maximum throw. In other words, the entrainment ratio and the maximum throw by 1.he free jet theory are hard to estimate the characteristics of jet because of restriction of c confined space.

• Structural Engineering and Mechanics
• /
• v.9 no.3
• /
• pp.289-304
• /
• 2000

This study discusses on the experimental and analytical results of the global buckling tests, carried out on aluminum alloy double layer space grids composed of tubular members, ball joints and connecting bolts at the member ends, with the purpose of demonstrating the effectiveness of a simplified analysis method using an equivalent slenderness ratio for the members. Because very few experiments have been carried out on this type of aluminum space grids, the buckling behavior is investigated experimentally over the post buckling regions using several space grid specimen with various values for the member slenderness ratio. The observed behavior duping the experiments is compared with the analytically obtained results. The comparison is made based on two different schemes; one on the plastic hinge method considering a bending moment-axial force interaction for members and the other on a method using an equivalent slenderness ratio. It is confirmed that the equivalent slenderness method can be effectively applied, even in the post buckling regions, once the effects of the rotational rigidity at the ball joints are appropriately evaluated, because the rigidity controls the buckling behavior. The effectiveness of the equivalent slenderness method will be widely utilized for estimation of the ultimate strength, even in post buckling regions for large span aluminum space grids composed of an extreme large number of nodes and members.