• 한국소음진동공학회논문집
• /
• 제15권5호
• /
• pp.604-611
• /
• 2005

The relationship between floor impact sound and vibration has been studied by field measurements, and the vibration modal characteristics have been analyzed. Vibration levels impacted by a standard heavy-weight impact source have been predicted according to the main design parameters using finite element method. Experimental results show that the dominant frequencies of the heavy impact sounds range below 100 Hz and that they are coincident with natural frequencies of the concrete slab. In addition, simple 2-dimensional finite element models are proposed to substitute 2 types of 3-dimensional models of complicated floor structural slabs those by The analytical result shows that the natural frequencies from first to fifth mode well correspond to those by experiments with an error of less than $12\%$, and acceleration peak value iscoincident with an error of less than $2\%$. Using the finite element model. vibration levels areestimated according to the design Parameters, slab thickness, compressive strength, and as a result, the thickness is revealed as effective to increase natural frequencies by $20\~30\%$ and to reduce the vibration level by 3$\~$4 dB per 30 mm of extra thickness.

• 대한기계학회논문집
• /
• 제14권5호
• /
• pp.1272-1281
• /
• 1990

본 연구에서는 압력형 경계조건을 취급할 수 있도록, 속도 경계조건만을 취급 하는 전형적인 프로그램을 수정하여 실제 상황에 가까운 실내 공간 내부의 유동장을 예측하였다. 이때 난류 흐름방식의 강제 대류를 해석하기 위한 지배방정식으로서는 저레이놀즈수 K-.epsilon. 난류 모델을 도입하였다. 실내로 유입되는 공기의 영향을 받는 유동장이 예측된 후에는 실내에 존재하는 오염원의 갯수를 변화시키면서 실내 공간 에서의 오염 물질 분포를 수치적으로 계산하였다. 본 연구에서의 실내공간은 2차원 이라 가정하였으며 유동은 정상유동이라 간주하였다. 또한 실내 공간을 채우는 공기 량에 비하여 오염 물질의 양은 그 질량비가 0.1% 이하로서 상대적으로 아주적으므로, 오염된 공기의 밀도는 오염되지 않은 공기의 밀도와 동일하다고 가정한다.

• 한국환경과학회지
• /
• 제14권8호
• /
• pp.771-775
• /
• 2005

The purpose of this research was to investigate applicative possibility of field. Pilot-scale experiments were conducted, at outdoor temperature, HRT l0hour, IR(Internal Recycle) $150\%$ and used $2.8m^3$ Reactor. External carbon source was varied 80 to 120 mg/L. When External carbon source and Alkalinity were injected to the B3 pilot plant, the removal efficiencies of COD and BOD were not decreased. Nitrification rate were 5.95, 5.40, 4.08 $mgNH_4^+-N/gSS/d$ during operation periods and denitrification rate was $3.l2mgNO_3^--N/gSS/d.$ When we surveyed the relationship between loading rate of nitrogen and nitrogen removal quantity, this data was 0.949, B3 process will be possible application process of field.

• Nuclear Engineering and Technology
• /
• 제51권6호
• /
• pp.1479-1486
• /
• 2019

The purpose of the present study is to develop the 3D static and noise simulator based on Galerkin Finite Element Method (GFEM) using the unstructured hexahedral elements. The 3D, 2G neutron diffusion and noise equations are discretized using the unstructured hexahedral by considering the linear approximation of the shape function in each element. The validation of the static calculation is performed via comparison between calculated results and reported data for the VVER-1000 benchmark problem. A sensitivity analysis of the calculation to the element type (unstructured hexahedral or tetrahedron elements) is done. Finally, the neutron noise calculation is performed for the neutron noise source of type of variable strength using the Green function technique. It is shown that the error reduction in the static calculation is considerable when the unstructured tetrahedron elements are replaced with the hexahedral ones. Since the neutron flux distribution and neutron multiplication factor are appeared in the neutron noise equation, the more accurate calculation of these parameters leads to obtaining the neutron noise distribution with high accuracy. The investigation of the changes of the neutron noise distribution in axial direction of the reactor core shows that the 3D neutron noise analysis is required instead of 2D.

• 한국축산식품학회지
• /
• 제39권2호
• /
• pp.296-308
• /
• 2019

Although the yellow mealworm (Tenebrio molitor L.) is a promising alternative protein source, the effects of processing conditions on functional properties are unclear. In this study, a protein extract of yellow mealworm larvae (PEYM) was subjected to different heat temperature ($55^{\circ}C$, $75^{\circ}C$, and $95^{\circ}C$) with different time (20, 40, and 60 min) to evaluate the functional properties and protein oxidation. Different heat temperature treatment significantly affected the exposure of surface hydrophobicity of the proteins and protein molecule aggregation, which reached maximum levels at $95^{\circ}C$ for 60 min. Protein oxidation was inversely proportional to the temperature. Both the highest carbonyl value (1.49 nmol/mg protein) and lowest thiol value (22.94 nmol/mg protein) were observed at $95^{\circ}C$ for 60 min. The heating time-temperature interaction affected several functional properties, including solubility, emulsifying potential, and gel strength (GS). Solubility decreased near the isoelectric point (pH 5 to 6). As the temperature and heating time increased, emulsifying properties decreased and GS increased. The oil absorption capacity and foaming properties decreased and the water absorption capacity increased. These results confirmed that PEYM is a suitable source of proteins for processing and applications in the food industry.

• 대한원격탐사학회지
• /
• 제37권1호
• /
• pp.57-67
• /
• 2021

An earthquake occurred on 17 November 2017 in Pohang, South Korea with a strength of 5.4 Mw. This is the second strongest earthquake recorded by local authorities since the equipment was first installed. In order to improve understanding of earthquakes and surface deformation, many studies have been conducted according to these phenomena. In this research, we will estimate the surface deformation using the Okada model equation. The SAR images of three satellites with different wavelengths (ALOS-2, Cosmo SkyMed and Sentinel-1) were used to produce the interferogram pairs. The interferogram is used as a reference for surface deformation changes by using Okada to determine the source of surface deformation that occurs during an earthquake. The Non-linear optimization (Levemberg-Marquadrt algorithm) and Monte Carlo restart was applied to optimize the fault parameter on modeling process. Based on the modeling results of each satellite data, the fault geometry is ~6 km length, ~2 km width and ~5 km depth. The root mean square error values in the surface deformation model results for Sentinel, CSK and ALOS are 0.37 cm, 0.79 cm and 1.47 cm, respectively. Furthermore, the results of this modeling can be used as learning material in understanding about seismic activity to minimize the impacts that arise in the future.

• 한국항공우주학회지
• /
• 제50권6호
• /
• pp.367-376
• /
• 2022

본 연구에서는 정상 및 비정상 공력 해석이 가능한 3차원 아음속 비정렬 패널 프로그램을 개발하고 검증하였다. 물체의 표면을 삼각형 또는 사각형 패널에 source와 doublet의 potential을 분포하여 모델링하였다. 따라서 복잡한 형상과 다물체도 쉽게 모델링 할 수 있다. Kelvin theory와 비정상 Kutta condition을 이용하여 비정상 유동에서 wake의 doublet 크기를 결정하였다. 2차원 및 3차원에서 정상 및 비정상 유동을 해석하여 그 결과를 해석해와 기존의 수치해와 비교하였다.

• 대한조선학회논문집
• /
• 제28권1호
• /
• pp.12-18
• /
• 1991

3차원(次元) 탱크내에서의 유체(流體)의 슬로싱 현상(現象)에 관하여 경계적분법(境界積分法)의 패널 방법(方法)을 이용한 경계치(境界値) 문제해법(問題解法)으로 수치계산(數値計算)하였다. Shinkai는 경계요소(境界要素)의 소오스의 세기가 절점(節点) 사이에서 선형변화(線型變化)하도록 계산하였음에 반하여 본 연구에서는 삼각형(三角形)패널마다 일정(一定)한 세기의 소오스를 분포(分布)시켰다. 각(各) 시간(時間)단계에서의 소오스의 세기는 Green 정리(定理)에 의한 제2종(第2種) Fredbolm적분(積分) 방정식(方程式)을 풀어서 구하며, 시간(時間)이 경과함에 따른 수치 계산과 이에 따른 오차(誤差)의 누적을 피하기 위하여 Adam-Bashforth-Moulton 방법(方法)을 이용하였다. 강제조화(强制調和)동요하는 선박의 구형(球形)탱크가 부분적재(部分積載)된 경우에 대하여 수치(數値)계산한 결과, 자유표면(自由表面)의 높이 계산치(計算値)는 Shinkai의 결과와 비교한 바 비교적 적은 시간동안에는 잘 일치하고 있음을 확인하였다. 본 수치 계산방법(方法)의 정도(精度)를 검토하기 위하여 입력(入力) 및 출력(出力) 에너지가 보존(保存)되는지를 확인하여 보았는데, 시간이 경과되면서 약간의 오차가 있지만 문제의 비선형성(非線型性), 모델의 패널수가 작음을 감안할때는 인정할 만한 정확도(正確度)로 판단된다.

• 대한가정학회지
• /
• 제17권1호
• /
• pp.45-55
• /
• 1979

The purpose of this study is to investigate to what extent and how the infant's Object Attachment occurs. For this purpose, 28 mothers with their infants showing or having shown this phenomenon were interviewed. They were selected by the whole scale smpling method from 310 household -wives living at a delux Apt. in Seoul. The results are summarized as follows : 1. About 27% of the infants aged between 6 months and 6 years turned out to show this phenomenon. 2. Qulits, bed clothes, pillows and blankets, which infants have been closely contacted since their babyhood, were the major source of attachment objects. In general, these objects were proved to have soft, wasm, smooth, and glassy tactile sensation. 3.This phenomenon, in average, appeared since 13 months after birth, About 50% of the whole began to show this phenomenon between 9 and 14 month after birth. 4. Half of the infants didn't show a change of attachment strength, but as for the other half, the attachment strength increased after one year of age, and decreased after three years of age, as the social period commenced. 5. Infants needed attachment objects especially when they were driven by sleep, sense of emptiness, and monotonous or boring feeling. 6. There were little difference between Object Attachment behavior and motherinfant attachment behavior except "babbling", "using her as a base for exploration". Those behaviors did not appear in Object Attachment. 7. mothers said that their children's attachment objects played the role of substitute mother, pacificater, warmer, friend , etc. And they attributed this phenomenon's appearance to lack their physical contact with, ocnstant and warm care toward, their children or bottle feeding.

• 한국표면공학회지
• /
• 제33권2호
• /
• pp.101-106
• /
• 2000

SOI (Silicon-On-Insulator) substrates were fabricated with varying annealing temperature of $25-660^{\circ}C$ by a linear annealing method, which was modified RTA process using a linear shape heat source. The annealing method was applied to Si ∥ $SiO_2$/Si pair pre-contacted at room temperature after wet cleaning process. The bonding strength of SOI substrates was measured by two methods of Razor-blade crack opening and direct tensile test. The fractured surfaces after direct tensile test were also investigated by the optical microscope as well as $\alpha$-STEP gauge. The interface bonding energy was 1140mJ/m$^2$ at the annealing temperature of $430^{\circ}C$. The fracture strength was about 21MPa at the temperature of $430^{\circ}C$. These mechanical properties were not reported with the conventional furnace annealing or rapid thermal annealing method at the temperature below $500^{\circ}C$. Our results imply that the bonded wafer pair could endure CMP (Chemo-Mechanical Polishing) or Lapping process without debonding, fracture or dopant redistribution.