• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.333.1-333
• /
• 2002

This paper suggests the noise reduction method of the engine cooling fan. It was estimated the fannoise contribution at the engine room and identified the noise source at the rotating fan by sound intensity method, first. And it has been developed the program for predicting the noise spectrum of axial flow fan. The radiated acoustic pressure is expressed the discrete frequency noise peaks at BPF and its harmonics and the line spectrum at the broad band by the noise generation mechanisms. In this paper it is shown that the comparison of the measuted and calculaed noise spectra of fn for the validation of the noise predictiong program. And this paper presents the characteristics of a fan noise due to modify the design parameters. Accordingly, it was obtained the design parameter values for noise reduction of fan.

• Wind and Structures
• /
• v.19 no.1
• /
• pp.89-111
• /
• 2014

The dynamics of a tornado-like vortex with touching down is investigated by using the LES turbulence model. The detailed information of the turbulent flow fields is provided and the force balances in radial and vertical directions are evaluated by using the time-averaged axisymmetric Navier-Stokes equations. The turbulence has slightly influence on the mean flow fields in the radial direction whereas it shows strong impacts in the vertical direction. In addition, the instantaneous flow fields are investigated to clarify and understand the dynamics of the vortex. An organized swirl motion is observed, which is the main source of the turbulence for the radial and tangential components, but not for the vertical component. Power spectrum analysis is conducted to quantify the organized swirl motion of the tornado-like vortex. The gust speeds are also examined and it is found to be very large near the center of vortex.

• Journal of the Semiconductor & Display Technology
• /
• v.2 no.2
• /
• pp.9-15
• /
• 2003

This paper proposes a thickness measurement method of silicon-oxide and poly-silicon film deposited on 12" silicon wafer for spin etcher. Halogen lamp is used as a light source for generating a wide-band spectrum, which is guided and focused on the wafer surface through a optical fiber cable. Interference signal from the film is detected by optical sensor to determine the thickness of the film using spectrum analysis and several signal processing techniques including curve-fitting and adaptive filtering. Test wafers with three kinds of priori-known films, polysilicon(300 nm), silicon-oxide(500 nm) and silicon-oxide(600 nm), are measured while the wafer is spinning at 20 Hz and DI water flowing on the wafer surface. From experiment results the algorithm presented in the paper is proved to be effective with accuracy of maximum 0.8% error.rror.

• Aerospace Engineering and Technology
• /
• v.10 no.1
• /
• pp.13-19
• /
• 2011

Lift off acoustic loads of KSLV-I were predicted by the modified NASA SP-8072 source distribution method (method 2) and the result was compared with those of measurements in the flight test of KSLV-I. In the second flight test, lift off acoustic loads were measured by outer microphones attached on the cable mast. The onboard data measuring outer acoustic pressure at the interstage of KSLV-I also can be obtained. The predicted result showed very similar peak and the shape of spectrum when compared with the measured spectrum and a margin about +7 dB.

• Journal of Astronomy and Space Sciences
• /
• v.14 no.1
• /
• pp.117-125
• /
• 1997

A Fabry-Perot interferometer has a very high (~1,000,000) resolution, so recently this has been widely used for many fields of space science. To understand the working principle of this a mathematical modeling is needed, and to analyze the interferogram it is essential to know the precise instrument function. The spectrum from the interferometer is mixed with a true signal from the light source and the instrument function through convolution. The true signal has the information about the quantum state of mo lecules, temperature and bulk motion of the gas. Therefore if we model the signal and convolve this with the theoretical instrument function we can predict the spectrum for the real case.

• International Journal of Railway
• /
• v.6 no.3
• /
• pp.125-130
• /
• 2013

Most of the test methods used for determining the acoustic performance of the noise barriers in Korean standards address the sound-proof panels but refer to noise barriers as a whole system or their in-situ performances less. Many new types of trains with different operating speeds have been developed and produced, and civil appeals against railway noise are becoming quite extensive. Considering these latest changes of circumstances, it is necessary to investigate the current standards and specifications pertaining to railway noise barriers. In this paper, criteria for the measurements and evaluations of noise barriers and sound-proof panels are examined and experimental studies are introduced. In order to suggest more efficient methods for reasonable evaluations of the noise barriers, frequency spectrums of the noise source, the power of the actual railway vehicles, are investigated and introduced.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.12
• /
• pp.1903-1909
• /
• 1989

In this paper, the mobile communication CH simulator is implemented in the baseband, using the Digital Signal Processor(TMS320C25), A/D and D/A converters. The Rayleigh CH is modeled by shaping the random noise source power spectrum. The statistical characteristics(Level Crossing Rate, Cumulative distribution Function, Probability Density Function) and the received fading signal's power's spectrum is observed when the doppler frequency is varied according to the variation of the vehicular velocity at the 222MHz band. And also the BER is measured when the baseband mobile CH simulator is applied to the GMSK(Gaussian Minimum Shift Keying` transmission rate: 16kbps, Bb T=0.25) modulator. The results shows the similar characteristics to be compared with the theoritically derived BER values of the discriminator type GMSK detection.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.2E
• /
• pp.39-44
• /
• 1999

In passive sonar, underwater moving objects are identified by the acoustic sounds they transmit. The spectrum of these sounds show features about the mechanism of the sound source, these features are discrete frequencies on the spectrum and frequency lines on the spectrogram. Variability in the underwater environment produce discontinuous broken or unstable fluctuating frequency lines. In this paper, we propose an efficient algorithm that estimate continuities of the discontinuous frequency lines and extract presence of the unstable frequency lines using neural networks and represent the proposed algorithm shows good performance in estimation and extraction the unstable frequency lines through the experiments.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.727-731
• /
• 2005

We introduce a method of color-coded illumination that is simple and fast. The purpose of this study is the real-time shape measurement of three-dimensional object by using color-coded information. The object is illuminated by a prism color spectrum. A color spectrum of a white-light source is imaged onto the object by illumination from one certain direction. The object is observed by a color CCD camera from a direction of observation, which is different from the direction of illumination. It can be evaluated by the red, blue, green using a inherence colors of hue value are good point.

• Nuclear Engineering and Technology
• /
• v.52 no.5
• /
• pp.1002-1007
• /
• 2020

The purpose of the current study was to evaluate a spectrum formulation set employed to modify the neutron spectrum of D-D fusion neutrons in a IS plasma focus device using GEANT4, MCNPX2.6, and FLUKA codes. The set consists of a moderator, reflector, collimator and filters of fast neutron and gamma radiation, which placed on the path of 2.45 MeV neutron energy. The treated neutrons eliminate cancerous tissue with minimal damage to other healthy tissue in a method called neutron therapy. The system optimized for a total neutron yield of 10⁹ (n/s). The numerical results indicate that the GEANT4 code for the cubic geometry in the Beam Shaping Assembly 3 (BSA3) is the best choice for the energy of epithermal neutrons.