• 한국지형학회지
• /
• 제19권4호
• /
• pp.157-168
• /
• 2012

언양단면은 울산광역시 울주군 삼남면 신화리의 삼동천이 태화강에 유입하는 지점에 위치한다. 언양단면에서 OSL 연대측정, 대자율, Y값 및 입도 분석 등 다양한 물리적 분석을 행하였다. 상부층의 조립 물질은 바람에 의해 주로 근거리에서 운반되었으며, 점이층과 하부층의 조립 물질은 유수에 의해 퇴적되었다. 언양단면은 대자율 변화의 불규칙성, Y값의 높은 편차, 매우 불량한 분급 등 한국의 봉동, 거창, 대천 등 다른 지역 퇴적층과 차이가 크다. 이러한 언양단면의 특성은 기존의 중국 뢰스고원과 인접한 범람원 등 다양한 기원지로부터 운반되었거나 다른 작용의 영향을 전체적으로 받았을 가능성을 시사한다. 언양단면의 퇴적물은 MIS 3 후기부터 MIS 2 시기까지 형성되었다.

• 대한금속재료학회지
• /
• 제49권9호
• /
• pp.732-738
• /
• 2011

Silicon oxide thin films were deposited by using a plasma-enhanced chemical-vapor deposition technique to investigate the light emission properties. The photoluminescence characteristics were divided into two categories along the relative ratio of the flow rates of $SiH_4$ and $N_2O$ source gases, which show light emission in the broad/visible range and a light emission peak at 380 nm. We attribute the broad/visible light emission and the light emission peak to the quantum confinement effect of nanocrystalline silicon and the Si=O defects, respectively. Changes in the photoluminescence spectra were observed after the post-annealing processes. The photoluminescence spectra of the broad light emission in the visible range shifted to the long wavelength and were saturated above an annealing temperature of $900^{\circ}C$ or after 1 hour annealing at $970^{\circ}C$. However, the position of the light emission peak at 380 nm did not change at all after the post-annealing processes. The light emission intensities at 380 nm initially increased, and decreased at annealing temperatures above $700^{\circ}C$ or after 1 hour annealing at $700^{\circ}C$. The photoluminescence behaviors after the annealing processes can be explained bythe size change of the nanocrystalline silicon and the density change of Si=O defect in the films, respectively. These results support the possibility of using a silicon-based light source for Si-optoelectronic integrated circuits and/or display devices.

• 한국대기환경학회지
• /
• 제13권2호
• /
• pp.161-170
• /
• 1997

The concentrations of dimethylsulfide (DMS) were determined using samples collected from a station located at Kosan, Cheju Island during two field campaigns held in December 1996 and January 1997. The atmospheric DMS concentrations measured at 6-hr intervals during the entire campaign periods, after excluding a few extreme values, spanned in the range of 14 to 410 pptv with mean and 1 SD value of 127 $\pm$ 94 pptv (N=42). Between two month periods during which the field campaigns were conducted, a notable reduction in DMS levels was observed which was comparable to the dramatic shift in air temperature. A considerable difference was also noted in DMS levels, when data were grouped by day/night basis. The cause of unexpected, high day-to-night DMS ratios is best explained in terms of high efficiency of daytime source processes relative to low efficiency of nighttime sink processes due to the characteristics of the study location. The surface water DMS of the study site, although scarcely measured, also behaved similarly to its atmospheric counterpart with its range from 0.3 to 19 nM (N=11). When correlation analysis was conducted between the atmospheric DMS concentration and other concurrently determined parameters, significant correlations were observed from most basic meteorological parameters such as windspeed, relative humidy, and air temperature. However, the existence of "not-so-strong" correlations between air temperature and DMS concentrations relative to other ones indicated that the effect of temperature on DMS behavior must be reflected in more complicated manners at the study site. The sea-to-air flux of DMS was approximated through an application of the mass-balance flux calculation method of Wylie and de Mora (1996) under the assumption that sink mechanism within the marine boundary layer is in steady-state condition with its counterpart, source mechanism. Based on this estimation method, we reached a conclusion that oceanic DMS emitted from the southwest sea of the Korean Peninsula can amount to approximately 9 $\sim$ 36 Gg S $yr^{-1}$.$yr^{-1}$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.358-361
• /
• 2002

Self-aligned MOSFETS using a polysilicon gate are widely fabricated in silicon technology. The polysilicon layer acts as a mask for the source and drain implants and does as gate electrode in the final product. However, the usage of polysilicon gate as a self-aligned mask is restricted in fabricating SiC MOSFETS since the following processes such as dopant activation, ohmic contacts are done at the very high temperature to attack the stability of the polysilicon layer. A metal instead of polysilicon can be used as a gate material and even can be used for ohmic contact to source region of SiC MOSFETS, which may reduce the number of the fabrication processes. Co-formation process of metal-source/drain ohmic contact and gate has been examined in the 4H-SiC based vertical power MOSFET At low bias region (<20V), increment of leakage current after RTA was detected. However, the amount of leakage current increment was less than a few tens of ph. The interface trap densities calculated from high-low frequency C-V curves do not show any difference between w/ RTA and w/o RTA. From the C-V characteristic curves, equivalent oxide thickness was calculated. The calculated thickness was 55 and 62nm for w/o RTA and w/ RTA, respectively. During the annealing, oxidation and silicidation of Ni can be occurred. Even though refractory nature of Ni, 950$^{\circ}C$ is high enough to oxidize it. Ni reacts with silicon and oxygen from SiO$_2$ 1ayer and form Ni-silicide and Ni-oxide, respectively. These extra layers result in the change of capacitance of whole oxide layer and the leakage current

• Biomedical Engineering Letters
• /
• 제8권4호
• /
• pp.383-392
• /
• 2018

For prompt gamma ray imaging for biomedical applications and environmental radiation monitoring, we propose herein a multiple-scattering Compton camera (MSCC). MSCC consists of three or more semiconductor layers with good energy resolution, and has potential for simultaneous detection and differentiation of multiple radio-isotopes based on the measured energies, as well as three-dimensional (3D) imaging of the radio-isotope distribution. In this study, we developed an analytic simulator and a 3D image generator for a MSCC, including the physical models of the radiation source emission and detection processes that can be utilized for geometry and performance prediction prior to the construction of a real system. The analytic simulator for a MSCC records coincidence detections of successive interactions in multiple detector layers. In the successive interaction processes, the emission direction of the incident gamma ray, the scattering angle, and the changed traveling path after the Compton scattering interaction in each detector, were determined by a conical surface uniform random number generator (RNG), and by a Klein-Nishina RNG. The 3D image generator has two functions: the recovery of the initial source energy spectrum and the 3D spatial distribution of the source. We evaluated the analytic simulator and image generator with two different energetic point radiation sources (Cs-137 and Co-60) and with an MSCC comprising three detector layers. The recovered initial energies of the incident radiations were well differentiated from the generated MSCC events. Correspondingly, we could obtain a multi-tracer image that combined the two differentiated images. The developed analytic simulator in this study emulated the randomness of the detection process of a multiple-scattering Compton camera, including the inherent degradation factors of the detectors, such as the limited spatial and energy resolutions. The Doppler-broadening effect owing to the momentum distribution of electrons in Compton scattering was not considered in the detection process because most interested isotopes for biomedical and environmental applications have high energies that are less sensitive to Doppler broadening. The analytic simulator and image generator for MSCC can be utilized to determine the optimal geometrical parameters, such as the distances between detectors and detector size, thus affecting the imaging performance of the Compton camera prior to the development of a real system.

• 터널과지하공간
• /
• 제32권2호
• /
• pp.144-159
• /
• 2022

본 연구에서는 지반의 열-수리-역학적 복합거동을 모델링하기 위한 순차적 접근법 기반의 시뮬레이터를 개발하고 적용된 연계해석 알고리즘의 계산성능을 분석하였다. 본 연구의 순차적 연계해석에서는 다공성 매질의 열 및 유체거동 분석을 위한 오픈소스 기반의 OpenGeoSys 수치코드와 역학해석을 위한 상용 소프트웨어 FLAC3D가 연동되었다. 해석해가 주어진 열-수리-역학적 복합거동 문제를 토대로 개발된 시뮬레이터에 대한 벤치마크 테스트가 수행되었다. 적용된 벤치마크 문제는 완전포화된 지반 내 점열원 작용 시 지반거동(시간에 따른 온도, 간극수압, 응력, 변형 변화)과 관계된다. 해석해와 수치해석 시뮬레이션 결과를 비교 분석하고 연계해석 시뮬레이터의 적정성을 조사하였다.

• 화약ㆍ발파
• /
• 제21권4호
• /
• pp.37-42
• /
• 2003

화약발파에 의한 암반의 파괴는 폭약의 열화학적 반응에 의해 생성되는 에너지가 주위 암반으로 전달되면서 발생한다. 폭약의 반응은 매우 짧은 시간에 격렬하게 이루어지므로 실험적 관찰이 용이하지 않을 뿐만 아니라, 암반을 대상으로 발파할 경우 암반의 불균질성, 이방성으로 인해 동일한 조건으로 실험을 하더라도 특성상 정량적 정성적으로 똑같은 상황을 반복적으로 재현하여 실험하는 것도 불가능하다. 따라서 폭약으로부터 발생하는 에너지와 암반으로의 전달과정은 암반 파괴의 에너지원으로서 매우 중요하면서도 명확히 파악되지 않은 부분이다. 본 논문에서는 수치해석적 방법으로 발파원과 암반의 거동을 모델링하여 발파원의 특성이 암반 거동에 미치는 영향을 고찰하였다. 주요 결과로는 발파원과 관련된 입력 자료로서 감쇠상수와 발파공벽에 가해지는 압력의 증가시간에 따라 암반의 동적거동이 상이하게 나타났으며, 동적 거동을 결정짓는 두 입력 변수의 상호관계를 유도할 수 있었다.

• 전기학회논문지
• /
• 제65권4호
• /
• pp.659-665
• /
• 2016

In this paper, we propose a novel position accuracy enhancement method of a low-end GPS using digital map information. The latest digital map has various kinds of information on geographical features. The proposed method uses position information of lane marks among the geographical features. We define the position information of lane marks as the reference points. The position information of a low-end GPS acquired for a period of time is defined as the source points. In the proposed method, rotation and translation matrices between the reference and the source points are calculated by using an Iterative Closest Point(ICP) algorithm. The source points are transformed by the obtained rotation and translation matrices. Finally, the transformed source points are projected on the reference points. Through these processes, the position accuracy of a low-end GPS is ultimately enhanced. To verify the proposed method, the various real experimental results are presented.

• 상하수도학회지
• /
• 제28권6호
• /
• pp.755-763
• /
• 2014

In this paper, a System Dynamics(SD) computer simulation model has been developed to assess the effects of developing and providing an alternate water source. A water service index was also developed to estimate the level of overall customer satisfaction on water supply service. Data from the Busan water supply service and the Korea Development Institute regarding the Nak Dong river bank storage development were utilized during the modeling processes. Some important indicators of the system under study were analyzed by the simulations of development of the alternate water source for Busan. The developed SD model and the water service index can be further utilized as a tool that can assess the extent and timing of an additional service improvement project.

• 천문학회보
• /
• 제36권2호
• /
• pp.59.1-59.1
• /
• 2011

I present an analysis of the long-term evolution of the fluxes of six active galactic nuclei (AGN) - 0923+392, 3C 111, 3C 273, 3C 345, 3C 454.3, and 3C 84 - in the frequency range 80 - 267 GHz using archival calibration data of the IRAM Plateau de Bure Interferometer. Our dataset spans a long timeline of ~14 years with 974 - 3027 flux measurements per source. We find strong (factors ~2-8) flux variability on timescales of years for all sources. The flux density distributions of five out of six sources show clear signatures of bi- or even multimodality. Our sources show mostly steep (alpha~0.5-1), variable spectral indices that indicate outflow dominated emission; the variability is most probably due to optical depth variations. The power spectra globally correspond to red-noise spectra with five sources being located between the cases of white and flicker noise and one source (3C 111) being closer to the case of random walk noise. For three sources the low-frequency ends of their power spectra appear to be upscaled in spectral power by factors ~2-3 with respect to the overall powerlaws. We conclude that the source emission cannot be described by uniform stochastic emission processes; instead, a distinction of "quiescent" and (maybe multiple) "flare" states of the source emission appears to be necessary.