• 한국전기화학회:학술대회논문집
• /
• 2003.11a
• /
• pp.169-176
• /
• 2003

• Proceedings of the KIEE Conference
• /
• 1998.07c
• /
• pp.1036-1038
• /
• 1998

The while, PD source detection in the oil TR was the level of the planar source detection. and it is to respected scientific research. The planar source detection technique had limits which have difficulties finding out the point of deterioration generation. In this study, our purpose is a development of PD source detection technique with Three-Dimensional using a principle and a technique of the planar source location.

• Journal of Korean Vacuum Science & Technology
• /
• v.4 no.4
• /
• pp.93-96
• /
• 2000

Microchannel plates (MCPs) have been developed by introducing new materials and process technologies. Main body was made of alumina by programmable punching, laminating, and firing. The channel walls of pore arrays of an MCP were deposited with thin films by electroless copper plating and sol-gel process. Our MCP has advantages such as easy fabrication, durability, high temperature endurance, and applicability to the large size comparing with the conventional MCPs. Experiments on the brightness of an MCP incorporated FED revealed that the FED with a MCP is three to four times brighter than a conventional FED. Moreover, the focusing in a FED is improved. Incorporating an MCP into a FED is one of promising methods to enhance the characteristics of the FED. In addition, amplification yield of the MCP is measured for varying the aspect ratio and the input current.

• The Journal of Korea Robotics Society
• /
• v.9 no.4
• /
• pp.206-215
• /
• 2014

Acoustic signal is crucial for the autonomous navigation of underwater vehicles. For this purpose, this paper presents a method of acoustic source localization. The proposed method is based on the probabilistic estimation of time delay of acoustic signals received by two hydrophones. Using Bayesian update process, the proposed method can provide reliable estimation of direction angle of the acoustic source. The acquired direction information is used to estimate the location of the acoustic source. By accumulating direction information from various vehicle locations, the acoustic source localization is achieved using extended Kalman filter. The proposed method can provide a reliable estimation of the direction and location of the acoustic source, even under for a noisy acoustic signal. Experimental results demonstrate the performance of the proposed acoustic source localization method in a real sea environment.

• Journal of Environmental Science International
• /
• v.19 no.8
• /
• pp.971-981
• /
• 2010

The objectives of this study were to measure ambient total gaseous mercury (TGM) concentrations in Seoul, to analyze the characteristics of TGM concentration, and to identify of possible source areas for TGM using back-trajectory based hybrid receptor models like PSCF (Potential Source Contribution Function) and RTWC (Residence Time Weighted Concentration). Ambient TGM concentrations were measured at the roof of Graduate School of Public Health building in Seoul for a period of January to October 2004. Average TGM concentration was $3.43{\pm}1.17\;ng/m^3$. TGM had no notable pattern according to season and meteorological phenomena such as rainfall, Asian dust, relative humidity and so on. Hybrid receptor models incorporating backward trajectories including potential source contribution function (PSCF) and residence time weighted concentration (RTWC) were performed to identify source areas of TGM. Before hybrid receptor models were applied for TGM, we analysed sensitivities of starting height for HYSPLIT model and critical value for PSCF. According to result of sensitivity analysis, trajectories were calculated an arrival height of 1000 m was used at the receptor location and PSCF was applied using average concentration as criterion value for TGM. Using PSCF and RTWC, central and eastern Chinese industrial areas and the west coast of Korea were determined as important source areas. Statistical analysis between TGM and GEIA grided emission bolsters the evidence that these models could be effective tools to identify possible source area and source contribution.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.05a
• /
• pp.9-10
• /
• 2005

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.05a
• /
• pp.27-28
• /
• 2005

• Journal of Information Display
• /
• v.2 no.4
• /
• pp.23-28
• /
• 2001

Field emission characteristics of carbon nanotubes(CNTs) on four kinds of metallic substrates have been investigated under the irradiation of a laser. The field emission measurement reveals that after laser irradiation the current was increased and new humps at the field emission current was found. The current enhancement was thought to have occurred due to the fact that the electrical contact between CNTs and metals was improved due to the irradiation of the laser.

• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.5
• /
• pp.495-505
• /
• 2005

This study is to estimate source contribution by air pollutantion types (point, area, line) over Seoul metropolitan area. The Air Pollution Model (TAPM) and the highly resolved anthropogenic and biogenic gridded emissions ($1km{\times}1km$) were applied to simulate $SO_2,\;NO_2,\;O_3\;and\;PM_{10}$ concentrations by seasons and contribution was estimated by their source types (point, area, line). The results showed that the simulated concentrations of secondary pollutant agreed well with observed values with an index of agreement (IOA) over 0.4, whereas IOAs over 0.3 were observed for most primary pollutants. The contributions of each source types by seasons were similar. The point source contribution was the highest for $SO_2$ at medium level ranged from $55.1\%\;to\;61.5\%$. But the contribution from area source during for the spring and summer increased as the concentration level increased. The line source contribution was the highest for $NO_2$ at all levels ranged from $68.3\%\;to\;93.1\%$. The results indicate that $SO_2$ emissions should be mainly controlled from point source, as well as area source at higher level concentration. Also, $NO_2\;and\;PM_{10}$ to from line source should be controlled.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.833-837
• /
• 2008

GSHP(Ground Source Heat Pump) has been extensively disseminated due to the recent increasing demand over new and renewable energy. In this study, the operating performance of rain water and ground source heat pump system (RW-GSHP) was compared with GSHP during the heating test. Leaving load temperature(LLT) was $50^{\circ}C$, $53^{\circ}C$, $56^{\circ}C$, respectively and rain water tank temperature(RWT) was $13^{\circ}C$, $15^{\circ}C$, $17^{\circ}C$ in this heating test. The experiment was focused on comparison of the system operating performance depending on leaving load temperature (LLT) and rain water tank temperature (RWT). The results showed that rain water and ground source heat pump system (RW-GSHP) was higher heating performance and COPh than those of GSHP.