• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.419-422
• /
• 1995

In this paper, we propose two methods for AE source location on the material with unknown AE wave velocity. By this method, we can apply this method to arbitrary material of which properties are not known exactly. Also, in this paper, the mechanism of error generation in both methods are discussed and performances are compared by using computer simulation and experiments which uses a lead break as the AE source on the aluminum plate.

• Magazine of the Korea Concrete Institute
• /
• v.10 no.6
• /
• pp.203-211
• /
• 1998

It is well recognized recently that acoustic emission, which is an elastic wave generated from rapid release of elastic energy in steressed solids, is very useful tool for on-line monitoring of microscopic behavior of deformation of material. In this study, three point bend test was performed to evaluate the microscopic damage progress during the loading and failure mechanism of mortar beam by monitoring the characteristic of AE signal. The relationship between AE characteristic and microscopic failure mechanism is discussed. In addition 2 dimensional AE source location based on triangular method was also done to monitor the intiation and propagation of micro crack around notch tip of mortar beam. It was shown that AE source location was very effective to predict the growth behavior of micro crack in mortar beam specimen.

• Journal of Internet Computing and Services
• /
• v.5 no.1
• /
• pp.85-97
• /
• 2004

Distributed Denial-of-Service(DDoS) attack prevent users from accessing services on the target network by spoofing its origin source address with a large volume of traffic. The objective of IP Traceback is to determine the real attack sources, as well as the full path taken by the attack packets. Existing IP Traceback methods can be categorized as proactive or reactive tracing. Proactive tracing(such as packet marking and messaging) prepares information for tracing when packets are in transit. Reactive tracing starts tracing after an attack is detected. In this paper, we propose a "advanced ICMP Traceback" mechanism. which is based on the modified push back system. Proposed mechanism can detect and control DDoS traffic on router and can generate ICMP Traceback message for reconstructing origin attack source.ck source.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.2
• /
• pp.239-244
• /
• 2017

We experimentally investigate the physical mechanism for asymmetrical degradation in amorphous indium-gallium-zinc oxide (a-IGZO) thin-film transistors (TFTs) under simultaneous gate and drain bias stresses. The transfer curves exhibit an asymmetrical negative shift after the application of gate-to-source ($V_{GS}$) and drain-to-source ($V_{DS}$) bias stresses of ($V_{GS}=24V$, $V_{DS}=15.9V$) and ($V_{GS}=22V$, $V_{DS}=20V$), but the asymmetrical degradation is more significant after the bias stress ($V_{GS}$, $V_{DS}$) of (22 V, 20 V) nevertheless the vertical electric field at the source is higher under the bias stress ($V_{GS}$, $V_{DS}$) of (24 V, 15.9 V) than (22 V, 20 V). By using the modified external load resistance method, we extract the source contact resistance ($R_S$) and the voltage drop at $R_S$ ($V_{S,\;drop}$) in the fabricated a-IGZO TFT under both bias stresses. A significantly higher RS and $V_{S,\;drop}$ are extracted under the bias stress ($V_{GS}$, $V_{DS}$) of (22 V, 20V) than (24 V, 15.9 V), which implies that the high horizontal electric field across the source contact due to the large voltage drop at the reverse biased Schottky junction is the dominant physical mechanism causing the asymmetrical degradation of a-IGZO TFTs under simultaneous gate and drain bias stresses.

• Journal of the Korea Concrete Institute
• /
• v.12 no.3
• /
• pp.67-75
• /
• 2000

It was well recognized that the damages associated mainly with the aging of civil infrastructures were one of very serious problems for assurance of safety and reliability. Recently carbon fiber sheet(CFS) has been widely used for reinforcement and rehabilitation of damaged concrete beam. However, the fundamental mechanism of load transfer and its load-resistant for carbon fiber sheet reinforced concrete are not fully understood. In this study, three point bending test has been carried out to understand the damage progress and the micro-failure mechanism of CFS reinforced mortars. For this purpose, four different types of specimens are used, that is, mortar, steel bar reinforced mortar, CFS reinforced mortar, and steel bar and CFS reinforced morter. Acoustic Emission(AE) technique was used to evaluate the characteristics of damage progress and the failure mechanism of specimens. in addition, two-dimensional AE source location was also performed to monitor crack initiation and propagation processes for these specimens.

• Journal of the Microelectronics and Packaging Society
• /
• v.9 no.4
• /
• pp.31-34
• /
• 2002

For the mold die sticking mechanism, the major explanation is that the silica as a filler in EMC (epoxy molding compound) wears die surface to be roughened, which results in increase of adhesion strength. As the sticking behavior, however, showed strong dependency on the EMC models based on the experimental results from different semiconductor manufacturers, chemisorption or acid-base interaction is apt to be also functioning as major mechanisms. In this investigation, the plasma source ion implantation (PSII) using $O_2, N_2$, and $CF_4$ modifies sample surface to form a new dense layer and improve surface hardness, and change metal surface condition from hydrophilic to hydrophobic or vice versa. Through surface energy quantification by measuring contact angle and surface ion coupling state analysis by Auger, major governing mechanism for sticking issue was figured out to be a complex of mechanical and chemical factors.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1590-1597
• /
• 2007

This paper deals with the noise source localization of the Korean High Speed Train (KTX) at the speed of 300 km/h. Using Microfonarray system and beamforming technology typical pass-by noise sources and their frequency characteristics are investigated. It is primarily aimed at investigating the location and characteristics of the high speed train emission. The results from the microphone array tests are also analyzed in relation to the remarks from analytic studies and experimental investigations on the high speed train that have been done with the intention of understanding the interior noise mechanism. The acoustical image shows the low frequency noise sources mainly at the position of the under part of the train at high speeds and the related source mechanism are discussed.

• Journal of Communications and Networks
• /
• v.18 no.2
• /
• pp.238-245
• /
• 2016

A sequence number checking technique is proposed to improve the performance of TCP connections in mobile ad hoc networks. While a TCP connection is initialized, a routing protocol takes the responsibility for checking the hop count between a source and destination pair. If the hop count is greater than a predefined value, the routing protocol decides to use a proxy node. The responsibility of a proxy node is to check the correctness of data packets and inform the missing packets by sending an acknowledgement from a proxy node to the source node. By doing so, the source node is able to retransmit any missing packet in advance without waiting until an end-to-end acknowledgement is received from the destination. Simulation results show that the proposed mechanism is able to increase throughput up to 55% in static network and decrease routing overhead up to 95%in mobile network.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1266-1269
• /
• 2004

With increasingly wide needs for a new energy source, many operation types of a wave-forced generation have been studied. To obtain an economically avaliable energy, it is imperative that the speed of the in put wave should be increased by a proper mechanism. In this study, we propose a new speed-increaser mechanism for the wave-force generation using a well-known Stephenson mechanism. In this paper, we have analysed kinematically the proposed speed-increasing mechanism. then a computer program based on the C++ language is developed to prove the validity of our mechanism and to simulate a wave-forced generation.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.15 no.6
• /
• pp.13-25
• /
• 2005

In these days, there are various uses of Linux such as small embedded systems, routers, and huge servers, because Linux gives several advantages to system developers by allowing to use the open source code of the Linux kernel. On the other hand, the open source nature of the Linux kernel gives a bad influence on system security. If someone wants to exploit Linux-based systems, the attacker can easily do it by finding vulnerabilities of their Linux kernel sources. There are many kinds of existing methods for lading source-level vulnerabilities of softwares, but they are not suitable for finding source-level vulnerabilities of the Linux kernel which has an enormous amount of source code. In this paper, we propose the Onion mechanism as a methodology of finding source-level vulnerabilities of Linux kernel variables. The Onion mechanism is made up of two steps. The Int step is to select variables that may be vulnerable by using pattern matching mechanism and the second step is to inspect vulnerability of each selected variable by constructing and analyzing the system call trees. We also evaluate our proposed methodology by applying it to two well-known source-level vulnerabilities.