• 설비공학논문집
• /
• 제23권5호
• /
• pp.321-326
• /
• 2011

Recently, ground source heat pump (GSHP) systems have been introduced in many modem buildings which use the annually stable characteristic of underground temperature as one of the renewable energy uses. However, all of GSHP systems cannot achieve high level of energy efficiency and energy-saving, because their performance significantly depends on thermal properties of soil, the condition of groundwater, building loads, etc. In this research, the effect of thermal properties of soil on the performance of GSHP systems has been estimated by a numerical simulation which is coupled with ground heat and water transfer model, ground heat exchanger model and surface heat balance model. The thermal conductivity of soil, the type of soil and the velocity of groundwater flow were used as the calculation parameter in the simulation. A numerical model with a ground heat exchanger was used in the calculation and, their effect on the system performance was estimated through the sensitivity analysis with the developed simulation tool. In the result of simulation, it founds that the faster groundwater flow and the higher heat conductivity the ground has, the more heat exchange rate the system in the site can achieve.

• Journal of Nutrition and Health
• /
• 제21권1호
• /
• pp.61-74
• /
• 1988

Ten college women were divided into 5 groups and treated in randomized block design for 5 weeks with 1 interval between treatments and subjects serving as their own controls. The experimental diets were corn oil diet as a source of n-6 linoleic acid, perilla oil diet as a source of n-3 $\alpha$-linolenic acid, and fish oil diet as a source of n-3 EPA and DHA. Dietary fat was supplied at 30% Cal and modified to give the total amount of saturated fatty acids and monoenoic acids at constant level. There was no significant effect on serum cholesterol level by different PUFA. However, on a gram-for-gram basis, there was a trend that the decrease in serum cholesterol was proportionate to the degree of fat unsaturation. On the other hand, only fish oil diet significantly decreased TG level but no significant effect on the relative proportion of TG in VLDL. The degree of hypotriglyceridemia did not corrleate with the degree of unsaturation. The relative proportion of CE in LDL was reduced by all PUFA diets but significant only by perilla oil diet. The relative amount of apoprotein in LDL was significantly reduced by n-3 PUFA. HDL-Chol content was significantly increased only in fish oil diet but no change in the relative proportion of its chemical components of HDL.

• 한국소음진동공학회논문집
• /
• 제19권11호
• /
• pp.1222-1230
• /
• 2009

A theoretical model was developed to compute the effect of a bubble layer in reducing the radiation noise generated by a force applied on an infinite flat plate considering the noise of multi-bubbles. Using the model, the effectiveness of a bubble layer in reducing the structure-borne noise of the plate was evaluated to consider various parameters such as the source noise levels, the thickness of bubble layers, the volume fractions and the frequency characteristics of bubbly fluids. Considering the noise of multi-bubbles, the actual reduction effect of radiation noise using a bubble layer was expected in cases of high source levels, high volume fractions of bubbles and large thickness of the bubble layer above the resonance frequency of the bubble layer. Accordingly, it is recommended that the thickness of a bubble layer, the source noise level and the characteristics of bubbly fluids should be optimized cautiously to maximize noise reduction effects.

• 한국전자통신학회논문지
• /
• 제11권11호
• /
• pp.1053-1060
• /
• 2016

본 논문은 디지털 능동형 가변 축전기를 사용한 적응형 이퀄라이저를 제안하고 있다. Equalizing amplifier는 주 증폭기와 source degeneration RC 필터로 구성되어 있으며, RC필터를 디지털 능동형 가변 축전기로 구현함으로써 면적 효율을 높이고 선형적인 손실 보상 영역을 확보했다. 능동형 가변 축전기는 miller effect에 의한 임피던스 증가 효과를 사용하였으며, 증폭기 이득 조정을 통해 capacitance의 가변성을 가질 수 있도록 하였다. 시뮬레이션 결과, 능동형 축전기의 선형적 가변 특성을 통해 입력 데이터의 고주파 손실을 보상하여 2Gb/s 전송속도에 대해 0.31 UI의 입력 eye 너비를 0.64 UI로 약 2배 증가시켰다. 적응형 이퀄라이저는 $0.13-{\mu}m\;CMOS$ 공정 값을 사용하여 설계 되었으며, 0.412 mm2 의 레이아웃 면적을 사용한다.

• 지질공학
• /
• 제24권4호
• /
• pp.463-471
• /
• 2014

This paper considers the effect of rainfall on non-point source (NPS) pollutant loads. The impact of runoff on the occurrence of NPS pollutants was found to be influenced by rainfall amount, rainfall intensity, and the number of antecedent dry days (ADD), both independently and in combination. The close correlation ($R^2$ = 0.9920) between rainfall and runoff amounts was demonstrated at the study site (a flower farm) over the period between January 2011 and December 2013. The relationships among pollutant levels, runoff, and rainfall was not satisfactory results except for the Biochemical Oxygen Demand ($BOD_5$). The correlation coefficients between $BOD_5$, and both runoff and rainfall, were greater than 0.92. However, the relationships of other pollutants, such as Suspended Solid (SS), Chemical Oxygen Demand ($COD_{Mn}$), Total Nitrogen (TN), and Total Phosphorus (TP), with runoff and rainfall had correlation coefficients of less than 0.70. The roles of rainfall was different from rainfall categories on the occurrence of runoff. Instantaneous rainfall intensity was a principle factor on the occurrence of runoff following light rainfall events (total ${\leq}30mm$). For rainfall of intermediate intensity (total precipitation 31-50 mm), the combined effect of both average rainfall intensity and ADD was found to influence runoff generation. We conclude that the control of NPS pollutants with the reflection of the climate change that makes the remarkable effect of amounts and forms on the rainfall and runoff.

• 전기학회논문지
• /
• 제60권7호
• /
• pp.1339-1346
• /
• 2011

This paper is developed to demand management scenario of energy consumption efficiency improvement, electricity generation efficiency improvement, network efficiency improvement, change of distribution ratio, movement of energy source, change of heating system, put of CHP to quantitatively assess to impact on energy use of demand management at the national level. This scenario can be applied Energy System Management model was developed based on Energy Balance Flow. In addition, effect analysis through built demand management scenario was quantitatively evaluated integrated demand management effectiveness of energy cost saving, CO2 emission reduction and energy savings of national level by calculating to primary energy source usage change in terms of integration demand management effect more often than not a single energy source separated electricity, heat and gas.

• 보건행정학회지
• /
• 제31권4호
• /
• pp.531-543
• /
• 2021

Background: Population aging is a serious problem in Korea. And we have experienced a rapid increase in the health expenditures of the elderly. The purpose of this paper is to analyze the effect of having a usual source of care (USC) for the elderly. Methods: This study used the Korea Health Panel Survey data of 2012, 2013, 2016, 2017, and 2018. The sample was the person who answered the USC questions among the elderly. The panel logit model was used to analyze the determinants of having USC and the panel simultaneous equation model was used to analyze the effect of having USC among the elderly on the medical expenses, medical utilization, and subjective health status. Results: The estimation result shows that age, income, marriage, and so forth turn out to be the factors of having USC. Having the clinic level USC is estimated to reduce the health care utilization and the health expenditure and to improve the subjective health status. Conclusion: It is expected that the result of our analysis will provide evidence for encouraging having USC.

• Nuclear Engineering and Technology
• /
• 제54권11호
• /
• pp.4220-4225
• /
• 2022

Monte Carlo (MC) simulations are increasingly being used as an alternative or supplement to the gamma spectrometric method in determining the full energy peak efficiency (FEPE) necessary for radionuclide identification and quantification. The MC method is more advantageous than the experimental method in terms of both cost and time. Experimental calibration with standard sources is difficult, especially for specimens with unusually shaped geometries. However, with MC, efficiency values can be obtained by modeling the geometry as desired without using any calibration source. Modeling the detector with the correct parameters is critical in the MC method. These parameters given to the user by the manufacturer are especially the dimensions of the crystal and its front edge, the thickness of the dead layer, dimensions, and materials of the detector components. This study aimed to investigate the effect of the front edge geometry of the detector crystal on efficiency, so the effect of rounded and sharp modeled front edges on the FEPE was investigated for <300 keV with three different HPGe detectors in point and volume source geometries using PHITS MC code. All results showed that the crystal should be modeled as a rounded edge, especially for gamma-ray energies below 100 keV.

• 한국물환경학회지
• /
• 제33권1호
• /
• pp.78-89
• /
• 2017

Water quality monitoring network data is being affected continuously due to non-point source pollution arising from agricultural land located on the Gwangsancheon outlet in the Nakdong River basin. In this study, we have performed analysis of water quality monitoring system, water quality pattern using SOM and water quality in the Gwangsancheon for sub-basin located at Gisan-myeon in the Nakdong River basin. We have developed and applied the model to estimate the runoff and non-point source loading. As a result of SOM pattern, the effect of non-point source pollution was the largest in the paddy fields and fields. As a result of the developed model, we found contribution rate and reduction rate for non-point source loading according to change of landuse because the reduction effect of nonpoint pollutants was 20.9% of SS, 9.9% of TN, 21.2% of TP and 8.9% of TOC depending on the landuse change.

• International journal of advanced smart convergence
• /
• 제5권4호
• /
• pp.15-20
• /
• 2016

When a virtual sound source for 3D auditory system is reproduced by a linear loudspeaker array, listeners can perceive not only the direction of the source, but also its distance. Control over perceived distance has often been implemented via the adjustment of various acoustic parameters, such as loudness, spectrum change, and the direct-to-reverberant energy ratio; however, there is a neglected yet powerful cue to the distance of a nearby virtual sound source that can be manipulated for sources that are positioned away from the listener's median plane. This paper address the problem of generating binaural signals for moving sources in closed or in open environments. The proposed perceptual enhancement algorithm composed of three main parts is developed: propagation, reverberation and the effect of the head, torso and pinna. For propagation the effect of attenuation due to distance and molecular air-absorption is considered. Related to the interaction of sounds with the environment, especially in closed environments is reverberation. The effects of the head, torso and pinna on signals that arrive at the listener are also objectives of the consideration. The set of HRTF that have been used to simulate the virtual sound source environment for 3D auditory system. Special attention has been given to the modelling and interpolation of HRTFs for the generation of new transfer functions and definition of trajectories, definition of closed environment, etc. also be considered for their inclusion in the program to achieve realistic binaural renderings. The evaluation is implemented in MATLAB.