• 제목/요약/키워드: sound barrier

검색결과 150건 처리시간 0.043초

철도소음 저감 향상을 위한 방음벽 상단의 능동제어장치 (Actively controlled sound field on the top edge of noise barriers for railway noise reduction)

  • 고효인;조준호;김재철;이찬우;한환수
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2005년도 춘계학술대회 논문집
    • /
    • pp.332-337
    • /
    • 2005
  • In this study the sound field on the surface of the top edge of noise barriers is actively minimized to enhance the shielding effect without increasing the hight of the barrier. First the results of a numerical study are shown; the sound field reduction in the far field due to a cylindrical active headpiece attached to a semi-infinite screen and the related control parameters are investigated. The results of a model experiment in an anechoic chamber and optimal control parameters for noise control on the railway side are shown and discussed.

  • PDF

동해에서 난수성 소용돌이의 원거리 음파전달에 미치는 영향 (Effects of Warm Eddy on Long-range Sound Propagation in the East Sea)

  • 김원기;조창봉;박정수;한주영;나영남
    • 한국음향학회지
    • /
    • 제34권6호
    • /
    • pp.455-462
    • /
    • 2015
  • 동해에는 주변 수온보다 온도가 높은 난수성 소용돌이가 자주 발생되는 것으로 알려져 있다. 이러한 난수성 소용돌이의 발생은 음속구조의 변화를 야기해 음전달특성을 변화시키게 되며, 특히 원거리 음전달에 큰 영향을 줄 것으로 예상된다. 본 논문에서는 난수성 소용돌이가 확인되는 2007년 3월 23일의 수온자료를 재분석한 자료를 이용하여 난수성 소용돌이가 원거리 음전달에 미치는 영향을 분석하였다. 연구를 위해 포물선 방정식 모델을 이용해 음파 전달손실과 평균 직접 신호초과 거리를 이용한 탐지거리 성능분포분석을 수행하였다. 분석결과 난수성 소용돌이의 존재는 난수성 소용돌이가 존재하지 않을 때와는 매우 다른 음전달 특성을 보여주고 있으며, 특히 난수성 소용돌이의 경계는 음전달의 제한적인 요소가 될 수 있기 때문에 원거리 음전달에 불리할 것으로 판단된다. 이러한 난수성 소용돌이에 의한 원거리 음전달의 제한은 해저 심도가 낮을수록 더 커지는 것을 확인하였다.

Ni/AlN/4H-SiC 구조로 제작된 소자의 후열처리 효과 (The Effect of Post-deposition Annealing on the Properties of Ni/AlN/4H-SiC Structures)

  • 민성지;구상모
    • 전기전자학회논문지
    • /
    • 제24권2호
    • /
    • pp.604-609
    • /
    • 2020
  • 본 연구에서는 RF 스퍼터를 이용하여 SiC 기판위에 AlN막을 증착하고 급속 열처리 (RTA) 공정의 온도에 따른 AlN/4H-SiC 구조의 전기적, 재료적 특성에 대한 영향을 분석하였다. 400도에서 RTA 공정을 진행한 Ni/AlN/4H-SiC SBD 소자의 온/오프 비율은 RTA 공정 전 그리고 600도에서 RTA 공정을 한 소자에 비해 약 10배정도 높은 값을 가졌다. 또한 오제이 전자현미경을 통한 원자성분 분석을 통해 증착한 AlN 층내의 존재하는 산소의 양이 후열 처리 조건에 따라 변화함을 확인하였고 소자의 온/오프 비율 그리고 온-저항 등 소자의 성능에 영향을 주는 것을 분석하였다. 추가적으로, 제작한 소자의 노출된 음향 주파수에 따른 전기적 특성변화를 분석하였다.

형상 방음벽 패널의 반사음 저감효과 평가 (Evaluation of Reduction in Reflection Sound bound from a Shaped Noise Barrier Panel)

  • 이재엽;김일호
    • 한국도로학회논문집
    • /
    • 제17권5호
    • /
    • pp.19-24
    • /
    • 2015
  • PURPOSES : The noise, which is typically generated by fast moving vehicles, can be intercepted by installing a noise barrier with a soundproof panel. However, reflections from the panels cause secondary noise, and hence lower the effectiveness of the panels. In this study, the reduction of reflection noise by considering the shape, especially zigzag one, of the soundproof panel have been evaluated. METHODS : The simulation model used in this study was Nord2000, which simulates real-road situations effectively. Based on the simulation results, the joining angle of $133^{\circ}$ with the pattern width (a) equal to 2 m and the projection height (b) equal to 0.5 m was adapted in the zigzag shape as the best profit designing factors. RESULTS: The measuring results at middle height, 15 m showed reduction at all points except the point with average -1.6 dB. At a greater height of 30 m, 2 points showed reduction. A real-sized facility was constructed to investigate the reflected sound from a zigzag shaped panel up to the height of 5 m. CONCLUSIONS: The reduction effects were detected in all the receive points in the range of 2-6 m distances and 1-5 m heights comparing the plane panel. Compared to plane panel, the noises are reduced at an average of 2.4 dBA.

억새 파티클보드의 흡음성능과 휨강도성능 (Sound Absorption Capability and Bending Strength of Miscanthus Particle Based Board)

  • 강춘원;박희준;전순식
    • Journal of the Korean Wood Science and Technology
    • /
    • 제40권1호
    • /
    • pp.38-43
    • /
    • 2012
  • 억새파티클보드의 흡음재로서의 사용가능성을 파악하고자 몇 가지 목표비중의 억새파티클보드를 제작하여 전달함수법(two microphone transfer function method)으로 상용주파수대역에서 흡음성능을 측정하고 휨강도 시험으로 역학적성질을 각각 측정, 비교하여 다음과 같은 결과를 얻었다. 측정주파수범위에서 거대억새보드의 흡음률이 상용석고보드보다 높은 흡음성능을 나타내었다. 탄성계수와 휨강도는 목표비중 증가에 따라 증가하는 경향을 나타내었다. 억새보드의 흡음률은 1~2.5 Khz 범위의 주파수범위에서 50~80%의 수치를 나타내다 이후 주파수에서는 30~50%의 흡음률을 나타내었으며 비중에 따라서는 비중이 증가할수록 흡음률이 낮아지는 경향을 보였다.

능동형 방음벽 개발을 위한 H/W 시스템 설계 (Active Noise Control Barrier for Acoustic Hardware System Design)

  • 차상곤;안드레이 트로쉰;김동환
    • 전기학회논문지
    • /
    • 제60권12호
    • /
    • pp.2368-2373
    • /
    • 2011
  • Traffic noise annoyance in dwelling area like private houses and apartment is becoming very important issue nowadays in South Korea. In this paper frequency analysis of the traffic noise was performed. Based on sound pressure levels analyses and its frequency content specific requirements for component of active noise control systems are formulated. Active compensational loudspeaker, microphone front end and DSP design were analysed, considered and proposed. Components specifications and design solutions are verified using modelling and experimental technique.

가설방음벽의 운영방안 및 설치기준에 관한 연구 (The study on the management method and installation guide of temporary noise barrier)

  • 윤제원;김영찬;강희만;장태순;이기정
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2006년도 추계학술대회논문집
    • /
    • pp.372-375
    • /
    • 2006
  • 건설 공사장에서 발생하는 건설장비의 소음을 저감하여 공사장 인근 지역의 생활환경에 미치는 소음영향을 최소화할 수 있도록 건설업체에서는 최대한의 노력으로 가설방음벽을 설치 운영하고 있으나, 설치된 가설방음벽의 효과분석 및 운영방법에 대한 검토가 부족하여 효율적인 소음저감대책으로서의 가설방음벽 운영이 어려운 실정이다. 따라서, 본 연구에서는 가설방음벽의 기초데이터의 확보와 소음해석을 통한 효율적인 운영방안을 제시하며, 설치기준에 관한 방안을 제시하고자 한다.

  • PDF

평탄부 선로에서 철도소음의 전파예측에 관한 연구 (A Study on the Predition of Train Noise Propagation from a Level Railroad)

  • 주진수;박병전
    • 소음진동
    • /
    • 제8권1호
    • /
    • pp.187-194
    • /
    • 1998
  • In order to predict the train noise propagation from a level railroad, this paper presents the model of train noise source and the prediction model based on the results by using the sound intensity method. The prediction model gives the effects of geometric attenuation, ground attenuation, and barrier attenuation of noise. There are several principal assumption in developing model: (a) the train noise is primarily rolling noise; (b) the rail head and wheels are in good condition; (c) the height of source is 10cm above track; (d) the directivity pattern of train noise sources is a dipole source. Calculated results based on this model are compared with available field data and good agreement has been obtained.

  • PDF

교통소음제어를 위한 간섭형 방음장치 형상개발에 관한 연구 (A study on the shape development of interference device for vehicle noise control)

  • 장강석;심상덕;김영찬;김두훈
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2000년도 춘계학술대회논문집
    • /
    • pp.1778-1783
    • /
    • 2000
  • When visual intrusion is an important factor, it is desirable to find alternative methods of improving the insertion loss of a noise barrier without increasing the height. Therefore, the primary object of the work attenuates the noise due to transport vehicle by small interference device installed at noise barrier edge. In this paper the performance of noise barriers with attached interference device, in terms of shape, absorptive material and split panel, are examined using the boundary element approach. Also, the scale models are moanted in an anechoic chamber and the frequency of the sound sources are appropriately scaled to simulate full scale site conditions. Lastly, experimental measurements of the designs are executed for a range of frequencies and receiver positions, and are compared with the results of numerical modeling.

  • PDF

Evaluation of low cost electret microphone performances for active noise control barriers

  • Troshin, Andrey G.;Cha, Sang-Gon;Kim, Dong-Hwan;Shin, Eun-Woo
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2011년도 추계학술대회 논문집
    • /
    • pp.115-119
    • /
    • 2011
  • Instead of very expensive sound record and professional measurement microphones the low cost Surface Mounted Device (SMD) microphones are proposed for practical barrier ANC system. FRF of the microphones and theirs sensitivity to the wind interferences are evaluated in semi anechoic chamber. The improvement of feedforward algorithm noise reduction index was evaluated based on measured coherence function between tested SMD and reference microphone. Test was performed at various wind speed from 1 m/s to 5 m/s.

  • PDF