• Journal of Life Science
• /
• v.18 no.9
• /
• pp.1271-1277
• /
• 2008

We investigated to determine the inhibitory effects of solvent extracts from dried onion on growth of cancer cell lines (HT-1080 human fibrosarcoma and HT-29 human colon cancer cells) and $H_{2}O_{2}$-induced oxidative stress. Two different drying methods, low temperature vacuum dryer and freeze dryer, were employed to dry onion. Inhibitory effects of acetone with methylene chloride (A+M) and methanol (MeOH) extracts from onion by two drying methods on the growth of HT-1080 and HT-29 cancer cells increased in a dose dependent manner (p<0.05) and the higher inhibitory effect was shown in onion extracts dried by low temperature vacuum dryer. The treatments of hexane, 85% aq. methanol, butanol and water fractions significantly inhibited the growth of both cancer cells (p<0.05) and onion fractions dried by freeze dryer showed a higher inhibitory effect compared with those dried by low temperature vacuum dryer. In order to determine a protective effect on H2O2-induced oxidative stress, DCHF-DA (dichlorodihydrofluorescin diacetate) assay was conducted. All fractions including crude extracts of dried onion appeared to significantly reduce the levels of intracellular reactive oxygen species (ROS) (p<0.05). Higher antioxidant effect was observed in onions dried by the low temperature vacuum dryer method. These results indicate that the low temperature vacuum dryer is useful to dry and produce onion powder.

• KSBB Journal
• /
• v.21 no.4
• /
• pp.312-316
• /
• 2006

A optimal condition for the Ginkgo biloba extraction in ethanol and water binary solvent system has been proposed based on concentration of bilobalide and ginkgolide known as having a antimicrobial components in the range 5% to 70% ethanol in water at $80^{\circ}C$. Concentration of bilobalide as a single component of Ginkgo biloba leaves extract is the highest at the 60% ethanol and ginkgolide A and B is highest at 50% ethanol. Antimicrobial effect of Ginkgo biloba leaves extracts on the S. aureus was also examined by disc diffusion test and optical density test. In case of the disc diffusion test, the clean zone diameter was increased from 0.95 cm to 1.70 cm as ethanol concentration increased from 5 to 70%. However, over the 40% of ethanol concentration the antimicrobial effect was almost flat. Based on these results, we propose that the 40% of ethanol and 60% water solvent is most desirable for Ginkgo biloba extract considering vapor pressure problem in concentrating process after extraction. We introduced SEM and TEM to figure out the morphological change on the surface and inside body of S. aureus when Ginkgo biloba leaves extract was treated. After mixed with Ginkgo biloba leaves extract blast like blebs appeared on the surface of S. aureus cells and cell wall was not observed. From the these results, it seems that the Ginkgo biloba leaves extract including bilobalide and ginkgolide A, B prevent cell wall synthesis.

• Korean Journal of Medicinal Crop Science
• /
• v.24 no.5
• /
• pp.401-407
• /
• 2016

Background: Salvia has been widely cultivated for use in flavoring and folk medicines in many countries, including Korea and China. In this study, we investigated the anti-inflammatory activity and the underlying active compounds of Salvia extract and its fractions. Methods and Results: The anti-inflammatory activity was measured by assessing the inhibition of cysteinyl leukotriene production in rat basophilic leukemia (RBL)-2H3 mast cells. Salvia plebeia R. Br. was found to have the most potent inhibitory activity on leukotriene production than S. japonica and S. chanroenica had. Fifty percent ethanol extracts of S. plebeia R. Br. were successively partitioned with n-hexane, methylene chloride, ethyl acetate, 1-butanol and water. The ethyl acetate (EtOAc) fraction showed stronger anti-inflammatory activity than other solvent fractions did. The EtOAc fraction was subjected to silica gel column chromatography elution with a chloroform and methanol gradient system (100 : 1 ${\rightarrow}$ 1 : 1) yielding 10 fractions. Three kinds of fractions (chloroform:methanol = 20 : 1, 10 : 1 and 5 : 1) showed high inhibitory activity on leukotriene production. We confirmed the major compounds with anti-inflammatory activity from S. plebeia R. Br. Conclusions: In this study, the major components of S. plebeia that showed leukotriene production inhibitory activity were isolated using solvent extraction and silica gel column chromatography. Rosmarinic acid, hispidulin and luteolin were identified as the major compounds with anti-inflammatory effect.

• Analytical Science and Technology
• /
• v.17 no.3
• /
• pp.263-270
• /
• 2004

A method is described for the analysis of short-chain alkylphenol ethoxylates (APEOs), 4-octylphenol-di-ethoxylate (OP2EO) and 4-nonylphenol-di-ethoxylate (NP2EO), in drinking water or wastewater using reversed phase high-performance liquid chromatography with electrospray ionization mass spectrometry. The solvent system was water and methanol containing $10{\mu}M$ trifluoroacetic acid as an ionization solvent. We acidified 1 L of water samples to less than pH 2 with concentrated $H_2SO_4$ and loaded onto Sep-Pak $C_{18}$, and eluted with acetone. The calibration of OP2EO and NP2EO was performed for the concentration range from 20 to 500 ng/L and the correlation coefficients were 0.999 and 0.990, respectively. The limits of detection were 20 ng/L (OP2EO) and 50 ng/L (NP2EO) at a signal-to-noise ratio of 3. Accuracy and precision of this analytical method were 85.8 ~ 122.1% and 8.2 ~ 18.8%, respectively. The proposed method allowed a sensitive and rapid detection of OP2EO and NP2EO and it could be applied for monitoring of APEOs from environmental samples.

• Horticultural Science & Technology
• /
• v.28 no.4
• /
• pp.685-690
• /
• 2010

Rubiadin, a major compound of noni ($Morinda$ $citrifolia$) adventitious root, is highly valued in pharmaceutical industry due to hepatoprotective activity. To dissect rubiadin's effective extraction condition, extraction process of noni adventitious roots was performed with different solvent types, ratio of water to methanol (water, 20, 40, 60, 80, and 100% of methanol), extraction time, and extraction method. In contrast, we also developed a reverse- phase HPLC assay method to determine rubiadin from noni adventitious roots. The HPLC assay of rubiadin was performed by C-18 column using a gradient solvent system of methanol and water with UV detector at 280 nm. The extraction efficiency of different types of solvents were increased in order of methanol (0.08%) > ethanol (0.05%) > acetonitrile (0.03%) > acetone (0.02%) and methylene chloride (0.02%). The results of rubiadin extraction using different solvents showed that 1 hour of ultrasonic extraction was effective in order of 60% methanol (0.21%) > 80% methanol (0.13%) > 100% methanol (0.07%), 40% methanol (0.07%) and 2 hours of reflux extraction was effective in order of 60% methanol (0.21%) > 40% methanol (0.17%) > 80% methanol (0.14%). To compare the extraction efficiency of rubiadin according to the extraction methods and time for high rubiadin content, the extracts of rubiadin in noni adventitious roots were isolated with the methods of ultrasonic extraction, shaking extraction and reflux extraction. Rubiadin extracted from the methods of ultrasonic waves and shaking displayed the highest contents at 8 and 24 hours, respectively.

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.1006-1013
• /
• 1997

This study was carried out to elucidate the chemical characteristics of mutual separation for Am and Eu, which were selected as a stand-in from minor actinide and rare earth elements, by solvent extraction with di-(2-ethylhexyl)phosphoric acid containing zirconium at batch system. As results, 92.3% of Am and 99.1% of Eu were coextracted with 1M DEHPA/n-dodecane containing zirconium (Zr $concentration=8.7g/{\ell}$) at 0.5M $HNO_3$ in the extraction step. The extraction yields of Am and Eu were proportionally increased with the concentration of Zr in Zr salt of 1M DEHPA/n-dodecane having the synergistic effect. In the lst stripping step for the selective separation of Am, 38.1% of Am and 3% of Eu were stripped with the mixed solution of 0.05M DTPA and 1M lactic acid adjusted pH of 3.0. At that time, the separation factor calculated from the distribution coefficients of Am and Eu was 14.2. In the 2nd Stipping step to remove the Eu remained the organic phase after the lst stripping step, 94.4% 0f Eu was stripped into aqueous phase with 6M $HNO_3$.

• Applied Chemistry for Engineering
• /
• v.24 no.6
• /
• pp.593-598
• /
• 2013

In this study, we have evaluated the water absorption phenomenon of photoresist dry film, which is commonly used to build circuits on PCB (Printed Circuit Board) by photolithography, by using ATR-FTIR (Attenuated Total Reflectance-Fourier Transform Infrared). We have firstly observed significant change in fracture mode of dry film with respect to temperature and humidity, which we assumed the material transition from ductile to brittle. Secondly, we have established the process of absorption test for determining the diffusion coefficients of water into the dry film both with gravimeter and ATR-FTIR. We have successfully calculated the diffusion coefficients for each environmental conditions from the results which we achieved by gravimeter and ATR-FTIR. Compared to the gravimeter which is a conventional method for absorption test, the ATR-FTIR method in this study has been found to be very easy to use and have the same accuracy as gravimeter. Moreover, we are expecting to use the ATR-FTIR as an appropriate method to study the absorption phenomena related to any kinds of solvent and polymer system.

• Membrane Journal
• /
• v.12 no.2
• /
• pp.97-106
• /
• 2002

Small angle light scattering (SALS) and field emission scanning electron microscope (FE-SEM) have been used to investigate the light scattering patterns with time evolved during water vapor quenching (relative humidity of 53 (${\pm}3)%$ at $26^{\circ}C$ of polysulfone (PSf)/NMP/Alcohol and chlorinated poly(vinyl chloride) (CPVC)/THF/Alcohol, respective1y. Time dependence of the position of the light scattering maximum was observed at PSf dope solutions, confirming spinodal decomposition (SD), while CPVC dope solutions showed a decreased scattered light intensity with an increased q-value, indicating nucleation & growth (NG). For the each system, domain growth rate in the intermediate and late stage of phase separation decreased with increasing the number of carbon of alcohol used as additive (non-solvent). Also, in the early stage for SD, the scattering intensity with time was in accordance with Cahn's linear theory of spinodal decomposition, regardless of types of non-solvent additive. Also, the size scales obtained by SALS were mutually compared to domain sizes gained by FE-SEM measurement. These observations of scattering pattern were much clearly observed for the 20PSf/70NMP/10n-butanol (w/w%) and agreed with the theoretical predictions for scattering patterns of each stage like the early, the intermediate, and the late stage of SD type phase separation. As the scattering maximum was observed at the larger angles (larger q) in the order of n-butanol > n-propanol > methanol > no alcohol, the pore size of final morphology decreased.

• Clean Technology
• /
• v.19 no.4
• /
• pp.416-422
• /
• 2013

In environmental friendly aspects, the synthesis of glycerol carbonate from glycerol using carbon monoxide and oxygen gases which were produced in petrochemical plants was studied. The oxidative carbonylation of glycerol under batch reaction system was performed on parameter conditions such as effect of various metals (Cu, Pd, Fe, Sn, Zn, Cr), oxidizing agents, mole ratio of carbon monoxide to oxygen, catalyst amount, solvent types, reaction temperature and time and dehydrating agents. In particular copper chloride catalysts showed the excellent activities, and the glycerol carbonate yields over CuCl and $CuCl_2$ catalysts were the maximum of 44% and 64%, respectively at the following reaction conditions: solvent as nitrobenzene, mole ratio of 1:3:0.15 (glycerol:carbon monoxide:catalyst), mole ratio of 2:1 (carbon monoxide:oxygen), the total pressure of 30 bar at 413 K for 4 hr. It was found that reactivity were significantly different depending on the oxidation number of Cu catalysts, and oxygen plays an important role as oxidizing agents in producing H2O during oxidation reaction after carbonylation of glycerol.

• Applied Chemistry for Engineering
• /
• v.27 no.2
• /
• pp.221-226
• /
• 2016

Production of eco-friendly and biologically harmless materials is strongly required in all industries. In particular, reducing volatile organic compounds in coating processes is extremely important to secure worker's safety. During recent two decades, extensive research works on water-borne polyurethane dispersion (PUD) have been continuously developed as an alternative to solvent-borne polyurethane. However, PUD was shown inferior mechanical properties to the organic solvent-borne polyurethane due to a limit to the molecular weight increase, which resulted in the limit of applications. To overcome this drawback, several approaches have been examined such as polymer blends and thermal/radiation induced crosslinking. Among these methods, the radiation curing system was suitable for industrialization because of the high crosslinking density and fast curing speed. In this study, we overcame the drawback for PUD via introducing benzophenone radiation curable units to PUD. We synthesized PUD films which possessed good dispersion in water for 30 days, increased Tg and Td more than $5^{\circ}C$ after UV curing film as well as improved young's modulus more than double.