• 제목/요약/키워드: solvent recovery

검색결과 443건 처리시간 0.025초

Sweep Co-Distillation 법에 의한 산화방지제의 추출법 (Extraction Method of Antioxidants in Soybean Oil)

  • 황혜정
    • 한국식품영양학회지
    • /
    • 제12권4호
    • /
    • pp.358-363
    • /
    • 1999
  • This study was conducted to evaluate the extraction methods for the determination of antioxidants in soybean oil. Recovery rates of various antioxidants in soybean oil showed similar rates as 80.4~102.1% by solvent/solvent extraction method and 89.9~106.4% by sweep co-distillation method except 46.6~61.2% of PG at corresponding spiked concentractions. The maximun recovery rates of antioxidnts were obtained when extraction time and extraction temperature used in UNITREX were 20min and 21$0^{\circ}C$ respectively. In the recovery rates with the activation of florisil when 2% ofwater was added to florisil the highest recovery rates for TBHQ, BHA, BHT were obtained by sweep co-distillation met-hod. Therefore sweep co-distillation method showed less solvent simple operation and high recovery rate compared with solvent/solvent extraction method.

  • PDF

분리벽형 증류탑을 적용한 필름공정의 폐용매 회수공정 최적설계 (Optimal Design of Solvent Recovery Process with Dividing Wall Column for Film Making Process)

  • 이승현;조문신;이문용
    • 제어로봇시스템학회논문지
    • /
    • 제12권12호
    • /
    • pp.1209-1214
    • /
    • 2006
  • This paper presents an application of Dividing Wall Column(DWC) to the recovery of the waste solvent from the film making processes. The waste solvent feed contains MEK(Methyl-Ethyl-Ketone), Toluene, Cyclohexanone, and water. The commercial software $HYSYS^{TM}$ was used for rigorous simulation and analysis. Sensitivity analysis for several major design variables were carried out to achieve the optimal design of the process. Distribution of the internal vapor and liquid flows to the prefractionator and main sections is shown to be the most dominant design factor for energy saving efficiency in the DWC process. The simulation results also show that the solvent recovery process using the DWC significantly improves both the energy efficiency and the compactness of the solvent recovery process.

폐용제 회수용 이중관형 열교환기 특성 해석 (Analysis of a Double Pipe Heat Exchanger for Waste Solvent Recovery)

  • 구재현;이재근
    • 자원리싸이클링
    • /
    • 제9권3호
    • /
    • pp.13-21
    • /
    • 2000
  • 본 연구는 폐용제를 가열, 증발 및 음축과정을 거쳐 용제를 회수하는 시스템의 열교환기 해석에 관한 것으로, 고온 열매체유로 가열되는 이중관형 열교환기를 사용하여 용제 증발과정의 열전달 특성을 분석하고 용제유량과 가열온도에 따라 물, 벤젠 및 알칼벤젠의 증발을 위해 요구되는 전열면적을 분석하였다. 폐용제 회수장치는 용제 공급펌프 이중관형 열교환기, 진공 스프레이 챕버 및 응축기동으로 구성되며, 이중관형 열교환기는 용제액을 열적 포화온도를 가열시키는 구간과 포화된 용제액을 증발시키는 구간으로 구성된다. 관 내 용제의 증발을 위한 전열면적을 열평형 모델링에 의해 예측하였고, 이중관형 열교화기의 관 내 온도분포 측정을 통해 이론값과 비교 분석하였다. 용제유량 0.1~0.51l/mm 및 가열온도 130~$260^{\circ}C$의 범위에서 용제유향 증가 및 가열온도 감속에 따라 단위전열면적당 열전달양이 감소하기 때문에 용제 증발을 위한 전열면적은 증가하였다. 관 내 용제 증발을 위한 전열면적의 이론적 분석결과는 측정값과 일치하였으며, 이중관형 열교환기를 사용한 폐용제의 증발과정을 통해 용제를 회수하는 기술에 적용이 가능하다.

  • PDF

Improvement of Hydrocarbon Recovery by Two-Stage Cell-Recycle Extraction in the Cultivation of Botryococcus braunii

  • An, Jin-Young;Sim, Sang-Jun;Kim, Byung-Woo;Lee, Jin-Suk
    • Journal of Microbiology and Biotechnology
    • /
    • 제14권5호
    • /
    • pp.932-937
    • /
    • 2004
  • In situ extraction by organic solvent was studied in order to improve the recovery yield of hydrocarbon from the culture of Botryococcus braunii, a green colonial microalga. When the solvent mixture of octanol as an extractive solvent and n-octane as a biocompatible solvent was added to a two-phase column, the algal growth was seriously inhibited, even at a low concentration of polar octanol. Therefore, a two-stage cell-recycle extraction process was proposed to improve the contact area between the organic phase and the aqueous phase. The hydrocarbon recovery with in situ cell-recycle extraction showed a three-fold increase (57% of cell) in yield over that with two-phase extraction. In addition, over 60% of the hydrocarbon could be recovered without serious cell damage by downstream separation when this process was applied to the culture broth after batch fermentation.

Recovery of Zinc in Spent Pickling Solution with Oxalic Acid

  • Lee, Kyung-Ran;Kim, Jeongsook;Jang, Jeong-Gook
    • Korean Chemical Engineering Research
    • /
    • 제55권6호
    • /
    • pp.785-790
    • /
    • 2017
  • To collect zinc, Fe and Zn in spent pickling solution were extracted by using TBP (tributyl phosphate), and Zn was recovered from extracted solution to zinc oxalate particles by oxalic acid solution. The reusability of TBP solvent was also tested. The distribution coefficient of Zn was not affected by the concentration of Fe in spent pickling solution, almost constant with the values of 7.12~9.31 when extracted by TBP solvent. It was found that the extraction capacity of TBP solvent for Zn is higher than that for Fe. The extraction efficiency of Zn was higher than 95%, while most of Fe was left in aqueous phase. After the recovery, the used TBP solvent could be repeatedly reused for the extraction of Zn up to eight times. XRD analysis showed that zinc oxalate ($ZnC_2O_4$ $2H_2O$) was formed from the reaction of Zn-TBP and oxalic acid. From the results of SEM analysis, the formation of zinc oxalate particle was strongly affected by the concentration of oxalic acid. In summary, Zn in spent pickling solution was successfully separated and recovered with TBP solvent and oxalic acid solution, respectively.

폐용제에 함유된 입자의 건조 및 분리용 연속식 순간 진공건조시스템 해석 (Analysis of a Continuous and Instantaneous Vacuum Drying System for Drying and Separation of Suspended Paricles in Waste Solvent)

  • 구재현;이재근
    • 자원리싸이클링
    • /
    • 제9권4호
    • /
    • pp.28-36
    • /
    • 2000
  • 본 연구는 입자가 혼합된 용제를 이중판형 열교환기 내에서 가열 및 증발과정을 통해 건조이자와 용제로 분리하여 회수하기 위한 연속식 순간 진공건조 시스템 해석에관한 것이다. 진공건조시스템은 용제 공급펌프, 이중관형 열교환기, 진공 스프레이 챔버 및 응축기로 구성된다. 연속적으로 공급되는 용제는 이중관형 열교환기 내에서 가열, 팽창 및 증발되며 관 출구부에서 팽창된 증기가 진공 스프레이 챔버 내로 분사되고 증기는 응축기로 수송되어 용제로 회수되고 입자는 관성력에 의해 증기로부터 분리되어 건조된다ㅣ. 안료입자가 함유된 벤젠 및 알킬벤젠의 분리 및 회수성능 실험을 수행한 결과, 습분양 1.1%로 건조된 안료입자를 94% 회수하였고, 99.9 wt%의 고순도 벤젠을 88% 회수하였다. 평균직경이 $6.5\mu\textrm{m}$인 안료입자를 진공건조시스템의 이중관형 열교환기에서 관출구부의 고속 분사에 의한 폭발적 분산력에 의해 입경이 14%감소된 $5.6\mu\textrm{m}$ 크기의 건조 안료입자를 회수하였다. 따라서 진공건조시스템은 용제에 함유된 입자를 건조 및 분리하여 미분제 제품으로 히수하는데 효율적이며 폐용제 정제용으로 적용이 가능하다.

  • PDF

Distillation design and optimization of quaternary azeotropic mixtures for waste solvent recovery

  • Chaniago, Yus Donald;Lee, Moonyong
    • Journal of Industrial and Engineering Chemistry
    • /
    • 제67권
    • /
    • pp.255-265
    • /
    • 2018
  • The huge amount of solvents used in the semi-conductor and display industry typically result in waste of valuable solvents which often form complex azeotropic mixtures. This study explored a recovery process of a quaternary waste solvent, comprising methyl 2-hydroxybutyrate, propylene glycol monomethyl ether acetate, ethyl lactate, and ethyl-3-ethoxy propionate. In this study, a novel shortcut column method with a graphical approach was exploited for the distillation column design of complex quaternary azeotropic mixtures. As a result, the proposed shortcut method and design procedure solved the complex separation paths successfully with less computational efforts while achieving all requirements for component purity.

LCD 제조공정에서의 폐용매 분리처리를 위한 공정 설계 (Design of Waste Solvent Treatment Process from LCD Manufacturing Process)

  • 윤문규;이문용
    • 청정기술
    • /
    • 제14권4호
    • /
    • pp.275-280
    • /
    • 2008
  • 연구에서는 LCD 제조 공정에서 배출되는 스트리퍼와 디벨로퍼 혼합 폐액(SD폐액)과 스트리퍼 폐수의 효과적 분리 및 처리를 위한 가능한 기술로서 추출공정과 증류공정의 기술적/경제적 타당성을 검토하였다. SD폐액과 스트리퍼 폐수의 추출분리를 위한 용매로 $CHCl_3$가 여러 가지 관점에서 가장 적절한 용매로 확인되었다. 또한 SD폐액 분리 회수를 위한 공정으로서 추출공정과 증류공정의 두 가지 공정에 대하여 정밀 전산모사를 수행한 결과 $CHCl_3$를 이용한 추출분리공정이 단순증류공정보다 6배 정도 에너지 소요비용이 적게 소요됨을 확인할 수 있었다.

  • PDF

고순도 용제 회수 시스템의 공정 조건 탐색을 위한 AMESim 모델 개발 (Developing AMESim Model to Find out Process Condition of High Purity Solvent Recovery System)

  • 김대현;주강우;김광선
    • 반도체디스플레이기술학회지
    • /
    • 제14권4호
    • /
    • pp.8-12
    • /
    • 2015
  • As NMP (N-Methyl-2pyrrolidone) is becoming important in many fields, the demand for it is also rising rapidly. With its chemical property of high boiling point, low vapor pressure and high water solubility, it is easy to recover it after processing. Therefore, it is increasingly needed to develop a system that effectively recovers NMP solvent. The study produced a system modeling using AMESim software before developing high purity solvent recovery (HPSR) system to recover NMP solvent. Then, it verified reliability by comparing the simulation model with the test result.

Light Hydrocarbon에 오염된 토양의 용매추출조건에 관한 연구 (Determination of Soil Washing Condition for Light Hydrocarbon Contaminated Soils)

  • Hwang, Keon-Joong;Atalay, Asmare
    • 한국환경보건학회지
    • /
    • 제23권4호
    • /
    • pp.82-90
    • /
    • 1997
  • 본 실험은 석유의 주요성분인 benzene, toluene, p,m,o-xylene, ethylbenzene, n-propylbenzene, 1,2,4-trimethylbenzene, n-butylbenzene 등 light hydrocarbon에 오염된 토양의 회복에 필요한 최적 용매추출 조건을 밝히기 위하여 실시하였다. 토양의 수분함량이 증가할수록 추출효율은 감소하였으며, Methanol을 용매로 사용하였을때에 BTEX화합물은 1시간 추출시 최고 추출효율에 도달하였으며 고분자 hydrocarbon은 4시간이상 추출시 최고 추출효율에 도달하였다. 2-Propanol을 추출용매로 사용할때는 모든 light hydrocarbon은 추출 4시간 경과시 최고의 추출효율을 나타냈다. 추출용매와 토양의 비율이 2:1일때 가장 경제적이고 효율적이고 추출이 이루어 졌으며, 0.4mg/g이상의 토양오염 농도에서 최적의 추출효과가 나타났다. 위의 최적조건으로 light hydrocarbon 오염토양을 batch extraction을 이용하여 추출하였을 때 평균 66%의 light hydrocarbon이 회수되었으며, 회수율은 토양의 종류, 추출용매의 종류 그리고 hydrocarbon의 종류에 따라 좌우되었다. 본 연구의 결과는 석유에 오염된 토양의 회복을 위한 토양세척에 사용될 수 있을 것으로 사료된다.

  • PDF