• Korean Journal of Plant Resources
• /
• v.28 no.3
• /
• pp.312-320
• /
• 2015

Total phenol, flavonoid and antioxidant components of cabbage leaf samples derived from different cultivar were determined. Total phenol compound content showed the highest amount in methanol extracts from ‘YR Howol’ cultivar (11.72 ㎎/g), followed by ‘Harutame’ (10.66㎎/g), ‘Winstar’ (10.34 ㎎/g) and YR Hero (10.20 ㎎/g). The highest amount of total flavonoid content was observed from the methanol extracts of Harutame (5.39 ㎎/g), followed by Winstar (4.28 ㎎/g), Wialhowol (4.10 ㎎/g). The SOD enzyme activity showed a high activity of ‘YR Hogeo’ cultivar, and the cultivar of ‘YR Howol’ cultivar showed the lowest activity of SOD. The activity of CAT and APX showed higher values ‘Ogane’ and ‘YR Hogeol’ cultivars than the other cultivars. The POD activities showed relatively high values ‘Ogane’ and ‘YR Howol’ cultivars compared with other cultivars. The free radical (DPPH) scavenging activity showed lower IC₅₀ values of ‘Harutame’ (15.71) and ‘YR Howol’ cultivar (16.88), however methanol extract of ‘YR Hero’ cultivar (22.49) being the highest. The extracts of all cabbage cultivars in the reaction solution of pH 1.2 could be decomposed nitrite more than 50%. Especially, the cultivar ‘YR Hogeol’ and ‘Ogane’ showed a relatively high nitrite scavenging activity for each 60.13% and 57.20% respectively. The IC₅₀ values of antioxidant activity determined by ABTS were lower in ‘Harutame’ (17.04) and ‘YR Howol’ cultivar (17.97), and its results observed similar with values obtained from the same extracts by DPPH method. The result of this study suggests that the methanol extract of Brassica oleracea L. contains the high amount of phenolic and higher radical scavenging activities.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.10
• /
• pp.2387-2392
• /
• 2009

A composite film of multi-walled carbon nanotube (MWCNT)/sol-gel-derived zinc oxide(ZnO)/Nafion has been utilized as an efficient immobilization matrix for the construction of a highly sensitive and stable tris(2,2'-bipyridyl) ruthenium(II) (Ru(${bpy)_3}^{2+})$ electrogenerated chemiluminescence (ECL) sensor. The electrochemical and ECL behaviors of Ru(${bpy)_3}^{2+})$ ion-exchanged into the composite film were strongly dependent upon the sol-gel preparation condition, the amount of MWCNT incorporated into the ZnO/Nafion composite film, and the buffer solution pH. The synergistic effect of MWCNTs and ZnO in the composite films increased not only the sensitivity but also the long-term stability of the ECL sensor. The present ECL sensor based on the MWCNT/ZnO/Nafion gave a linear response ($R^2$ = 0.999) for tripropylamine concentration from 500 nM to 1.0 mM with a remarkable detection limit (S/N = 3) of 15 nM. The present ECL sensor showed outstanding long-term stability (94% initial signal retained for 5 weeks). Since the present ECL sensor exhibits large response towards NADH, it could be applied as a transduction platform for the ECL biosensor in which the NADH is produced from the dehydrogenase-based enzymatic reaction in the presence of NA$D^+$ cofactor.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.8
• /
• pp.1375-1382
• /
• 2007

A column preconcentration method with pulverized Amberlite XAD-4 loaded with bismuthiol I (BI) has been developed for the determination of trace Cd(II) and Cu(II) in various real samples by flame atomic absorption spectrophotometry. Various experimental conditions, such as the size of XAD-4, adsorption flow rate, amount of bismuthiol I, stirring time for adsorbing bismuthiol I on XAD-4, pH of sample solution, amount of XAD-4- BI, desorption solvent, and desorption flow rate, were optimized. Also, the adsorption capacity and the adsorption rate of Cd(II) and Cu(II) on XAD-4-BI were investigated. The interfering effects of various concomitant ions were investigated, Bi(III), Sn(II) and Fe(III) were found to affect the determination. But the interference by these ions was completely eliminated by adjusting the amount of XAD-4-BI resin to 0.70 g, although the adsorption flow rate was slower. For Cd(II) our proposed technique obtained a dynamic range of 0.5-40 ng mL-1, a correlation coefficient (R2) of 0.9913, and a detection limit of 0.3 ng mL-1. For Cu(II), the corresponding values were 2.0-120 ng mL-1, 0.9921 and 1.02 ng mL-1. To validate this proposed technique, the aqueous samples (stream water, reservoir water, tap water and wastewater), the diluted brass sample and the plastic sample, as real samples, were used. Recovery yields of 91-103% were obtained. These measured data were not different from ICP-MS data at 95% confidence level. Our proposed method was also validated using rice flour CRM (normal, fortified) samples. From the results of our experiment, we found that the technique we present here can be applied to the determination of Cd(II) and Cu(II) in various real samples.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.11
• /
• pp.3307-3311
• /
• 2013

A new fiber optical sensor was developed for the determination of 2,4-dichlorophenol (DCP). The sensor was based on DCP oxidation by oxygen with the catalysis of iron(III) tetrasulfophthalocyanine (Fe(III)PcTs). The optical oxygen sensing film with $Ru(bpy)_3Cl_2$ as the fluorescence indicator was used to determine the consumption of oxygen in solution. A lock-in amplifier was used for detecting the lifetime of the oxygen sensing film by measuring the phase delay change of the sensor head. The different variables affecting the sensor performance were evaluated and optimized. Under the optimal conditions (i.e. pH 6.0, $25^{\circ}C$, Fe(III)PcTs concentration of 0.62 mg/mL), the linear detection range and response time of the sensor are $1.0{\times}10^{-6}-9.0{\times}10^{-6}$ mol/L and 250 s, respectively. The sensor displays high selectivity, good repeatability and stability, and can be used as an effective tool in analyzing DCP concentration in practical samples.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.5
• /
• pp.1038-1042
• /
• 2008

Mono and multilayer TiO2(Fe, $PEG_{600}$) films were deposited by the dip-coating on $SiO_2$/glass substrate using sol-gel method. In an attempt to improve the antibacterial properties of doped $TiO_2$ films, the influence of the iron oxides and polyethilenglycol ($PEG_{600}$) on the morphological, optical, surface chemical composition and biological properties of nanostructured layers was studied. Complementary measurements were performed including Spectroscopic Ellipsometry (SE), Scanning Electron Microscopy (SEM) coupled with the fractal analysis, X-Ray Photoelectron Spectroscopy (XPS) and antibacterial tests. It was found that different concentrations of Fe and $PEG_{600}$ added to coating solution strongly influence the porosity and morphology at nanometric scale related to fractal behaviour and the elemental and chemical states of the surfaces as well. The thermal treatment under oxidative atmosphere leads to films densification and oxides phase stabilization. The antibacterial activity of coatings against Escherichia Coli bacteria was examined by specific antibacterial tests.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.577-582
• /
• 2007

A variational formulation for plane elasticity problems is derived based on an isogeometric approach. The isogeometric analysis is an emerging methodology such that the basis functions in analysis domain arc generated directly from NURBS (Non-Uniform Rational B-Splines) geometry. Thus. the solution space can be represented in terms of the same functions to represent the geometry. The coefficients of basis functions or the control variables play the role of degrees-of-freedom. Furthermore, due to h-. p-, and k-refinement schemes, the high order geometric features can be described exactly and easily without tedious re-meshing process. The isogeometric sensitivity analysis method enables us to analyze arbitrarily shaped structures without re-meshing. Also, it provides a precise construction method of finite element model to exactly represent geometry using B-spline base functions in CAD geometric modeling. To obtain precise shape sensitivity, the normal and curvature of boundary should be taken into account in the shape sensitivity expressions. However, in conventional finite element methods, the normal information is inaccurate and the curvature is generally missing due to the use of linear interpolation functions. A continuum-based adjoint sensitivity analysis method using the isogeometric approach is derived for the plane elasticity problems. The conventional shape optimization using the finite element method has some difficulties in the parameterization of boundary. In isogeometric analysis, however, the geometric properties arc already embedded in the B-spline shape functions and control points. The perturbation of control points in isogeometric analysis automatically results in shape changes. Using the conventional finite clement method, the inter-element continuity of the design space is not guaranteed so that the normal vector and curvature arc not accurate enough. On tile other hand, in isogeometric analysis, these values arc continuous over the whole design space so that accurate shape sensitivity can be obtained. Through numerical examples, the developed isogeometric sensitivity analysis method is verified to show excellent agreement with finite difference sensitivity.

• Macromolecular Research
• /
• v.17 no.2
• /
• pp.128-132
• /
• 2009

Fucoidan, a sulfated polysaccharide derived from brown seaweed, is an important material valued for its various biological functions, including anti-coagulation, anti-aging, and immune system support. In this study, we examined the potential of fucoidan as a novel emulsifying agent in BSA (bovine serum albumin)-stabilized emulsion at a neutral pH. We measured the dispersed oil-droplet size, surface zeta-potential and creaming formation of 0.5 wt% BSA emulsion (20 wt% oil traction) in the absence and presence of fucoidan. The average particle size and zeta-potential value were 625.4 nm and -30.91 mV in only BSA-stabilized emulsion and 745.2 nm and -44.2 mV in 1.0 wt% fucoidan-added BSA emulsion, respectively. This result suggested that some positive charges of the BSA molecules interacted with the negative charges of fucoidan to inhibit the flocculation among the oil droplets. The creaming rate calculated from the backscattering data measured by Turbiscan dramatically decreased in 1.0 wt% fucoidan-added BSA emulsion during storage. Accordingly, the repulsion forces induced among the oil particles coated with 1.0 wt% fucoidan in emulsion solution resulted in significantly increased emulsion stability. The turbidity of the BSA-stabilized emulsion at 500 nm decreased during five days of storage. However, the fucoidan-added BSA emulsion exhibited a higher value of turbidity than the BSA-stabilized emulsion did. In conclusion, an anionic sulfated fucoidan lowered the surface zeta-potential of BSA-coated oil droplets via the electrostatic interaction, and subsequently inhibited the flocculation among the oil droplets, thereby clearly minimizing the creaming and phase separation of the emulsion.

• Journal of Korean Society on Water Environment
• /
• v.22 no.1
• /
• pp.116-121
• /
• 2006

Fundamental investigations have been carried out to find the applicability of manganese nodule as an adsorbent of nickel ion with an intention that nickel can be secured in manganese nodule along with the treatment of wastewater. The average content of manganese in nodules which used in the experiments was about 27%. The content of nickel in manganese nodules was observed to increase up to 4 times higher with comparison to its original value after adsorption. When the initial concentration of nickel ion in artificial wastewater was lower than 500 mg/L, its adsorbed amount on manganese nodule was shown to increase continuously. However, no more than about 82 mg/L of nickel was attained at higher initial nickel ion concentration than 500 mg/L. The adsorption of nickel ion was increased with temperature under experimental conditions and as the size of manganese nodule particles became smaller more nickel ion was adsorbed on adsorbent. Regarding the effect of pH, the adsorption of nickel ion was more hindered as the solution became acidic. Adsorption behavior of nickel ion on manganese nodule was found to follow the Freundlich model well and kinetic analysis showed that the adsorption reaction of nickel ion was second order. Thermodynamic parameters for the nickel ion adsorption were estimated on the basis of thermodynamic equations and they were in good agreement with experimental results.

• Korean journal of food and cookery science
• /
• v.22 no.6 s.96
• /
• pp.905-913
• /
• 2006

The properties of water soluble powder of propolis(WSP), made with different levels(0, 20, 40, 60, 80%) of ethanol extract of propolis(EEP) and hydrocolloid were investigated, along with the quality changes of its bread after 7 days' of storage at $30^{\circ}C$ The yield of WSP containing 40% EEP treated at $160^{\circ}C$ was the highest at 59.3% and the brown color of all the powders tended to be darkened with increasing EEP content. The turbidity of WSP treated at higher temperature was decreased in its aqueous solution (10%, w/w), and this was considered to be due to the presence of minute nonsoluble particles. Antioxidative activities determined by DPPH(1,1-diphenyl-2-picrylhydrazyl) were the lowest in WSP treated at $140^{\circ}C$, while those of the WSP samples prepared at 160 and $180^{\circ}C$ were as high as that of WSP containing more than 40% EEP, regardless of EEP concentration. The propolis breads with added WSP made at $160^{\circ}C$ were selected as the most desirable powder for subsequent study. Bread with WSP40 was the heaviest while the volume loss of WSP80 was the greast after baking. The moisture contents of the propolis bread were drastically decreased until 3 days' of storage, but it was thought that WSP might be ineffective for the prevention of moisture loss. The pH of breads without EEP was decreased after 3 days' of storage, while that of the WSP breads remained almost unchanged until 5 days' of storage. Total bacterial counts also exhibited decay levels during the storage. In conclusion, water soluble powder of propolis is useful as a natural antioxidative and antibacterial material in various types of food.

• Korean Journal of Microbiology
• /
• v.36 no.2
• /
• pp.97-102
• /
• 2000

In order to use Metarhizizmn~ anisopliae as a biological pesticide, effect of envrionmental factors on nlycelial growth, spore formation, and extracellular enzyme activity in culture broth of M. anisopliae DGUM 35001 was determined. Optimal temperature was 26^{\circ}C.$ and optimal pH ranged from 5 to 9. Among the complex media tested, MCM and SDPY media were the most favorable for mycelial growth. When Czapek-Dox agar was used as a mnimal medium, glucose and sucrose among the saccharides were very excellent source of carbohydrate. Among the biopolyners tested. chitin was the most favorable source for mycelial growth and produced high aerial inycelia. Urea and ammonium phosphate as an inorganic nitrogen source and bacto-peptone and soytone as an organic nitrogen source enhanced the mycelial growth When serine as a source of amino acid was supplemented, excellent mycelial growth was shown. Large amount of spores could be obtained from the aerial mycelia of starch medium. When the culture broth was filtrated and then the concentrate with ammonium sulfate was used as a crnde enzyme solution, high enzyme activities of amylase and protease were shown. However, lipase and chitinase activities were comparatively low.