• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1307-1316
• /
• 2009

In this case, powerfulness quorum of destruction side which we have expected are supposed general limit value for rock floor when retaining of earth on the section of rock floor in the urban area. For digging in the urban area, there are a lot of dislocations to be disadvantage for safety of digging ants. The displacement of the pondside didn't converged with the phase of the excavation. Also, the speed of displacement got higher than the percentages of risk in the construction. So, we put into operation Face mapping for checking special quality of dislocations which appear on the digging ants. This results were used to decide a destruction in the case of the final excavation by analyzing with other results. It was possible to know the unstable distribution of a fault line in Face Mapping and to get powerful lens of a surface of discontinuity by tests indoors and outdoors. The results were also used to make a solution. Therefore, It's a successful example using the Partial TopDown for stable digging. And it is important that Face Mapping have to be practiced for solving the uncertainty of ground organization when digging design in the urban city.

• Steel and Composite Structures
• /
• 제33권2호
• /
• pp.209-224
• /
• 2019

This paper describes a study of the mapping relationship between the vertical deformation of bridge structures and rail deformation of high-speed railway, taking the interlayer interactions of the bridge subgrade CRTS II ballastless slab track system (HSRBST) into account. The differential equations and natural boundary conditions of the mapping relationship between the vertical deformation of bridge structures and rail deformation were deduced according to the principle of stationary potential energy. Then an analytical model for such relationship was proposed. Both the analytical method proposed in this paper and the finite element numerical method were used to calculate the rail deformations under three typical deformations of bridge structures and the evolution of rail geometry under these circumstances was analyzed. It was shown that numerical and analytical calculation results are well agreed with each other, demonstrating the effectiveness of the analytical model proposed in this paper. The mapping coefficient between bridge structure deformation and rail deformation showed a nonlinear increase with increasing amplitude of the bridge structure deformation. The rail deformation showed an obvious "following feature"; with the increase of bridge span and fastener stiffness, the curve of rail deformation became gentler, the track irregularity wavelength became longer, and the performance of the rail at following the bridge structure deformation was stronger.

• Journal of applied mathematics & informatics
• /
• 제17권1_2_3호
• /
• pp.509-517
• /
• 2005

We shall prove the existence and uniqueness theorem of a solution to the non local fuzzy differential equation using the contraction mapping principle.

• Journal of Information Science Theory and Practice
• /
• 제8권1호
• /
• pp.56-67
• /
• 2020

Over the years, cultural mapping methods have been used in several applications and contexts, for diverse cultural assets and to create new conditions for the development of local and regional resources. These methods were inspired by the development of big urban centres and regions, which have been the great engine of cultural mapping growth. The main objectives of the present paper are to provide a literature review on cultural mapping methodologies and to develop exploratory research on crowdsource tools on creative tourism which were applied to one Portuguese municipality in 2017. The research was supported by the implementation and integration of geographic information systems (GIS) and web mapping, which will become part of the solution for the growth of less developed territories and to make more interactive tourist activities. Web mapping's contribution to enhance crowd participation was measured via analysis of 12 digital photos shared through crowdsourcing. The originality of this research lies in the attempt to develop a new model for creative tourism, trying to extend the implementation of Web Mapping crowdsourcing to deprived low density territories. Results show how public participation can be amplified for the tourism market by crowdsourcing tools. These tools look very promising since they can help several members of the public at different ages to contribute to territorial knowledge, engage in activities, and collaborate through digital tools. It is a step to fulfil the lack of studies in this subject and it contributes to the way we think about future studies.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제23권1호
• /
• pp.73-96
• /
• 2016

We establish a coupled coincidence point theorem for generalized com-patible pair of mappings under generalized nonlinear contraction on a partially or-dered metric space. We also deduce certain coupled fixed point results without mixed monotone property of F : X × X → X . An example supporting to our result has also been cited. As an application the solution of integral equations are obtained here to illustrate the usability of the obtained results. We improve, extend and generalize several known results.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제24권2호
• /
• pp.79-98
• /
• 2017

We establish a coupled coincidence point theorem for generalized compatible pair of mappings $F,G:X{\times}X{\rightarrow}X$ under generalized symmetric Meir-Keeler contraction on a partially ordered metric space. We also deduce certain coupled fixed point results without mixed monotone property of $F:X{\times}X{\rightarrow}X$. An example supporting to our result has also been cited. As an application the solution of integral equations are obtain here to illustrate the usability of the obtained results. We improve, extend and generalize several known results.

• 대한기계학회논문집A
• /
• 제24권12호
• /
• pp.2935-2944
• /
• 2000

Gas tungsten arc(GTA) welding is used to rrpiar the seat ring in swing type check valve in power plant because of its high weld quality. In order to automate the welding process, it is needed to analyze the process of inside pipe girth welding. In this study, the shapes of weld bead on pipe inside and outside were predicted and its validity was investigated. On the assumption that the welding arc had a bivariate gaussian distribution, analytical solution was derived to predict the temperature distribution in pipe weld using mapping under consideration of physical relationships. The size of weld bean could be predicted from this equation and its accuracy was verified by experiments.

• Journal of Computing Science and Engineering
• /
• 제7권1호
• /
• pp.30-43
• /
• 2013

Multicore and multiprocessor systems with dynamic voltage scaling architectures are being used as one of the solutions to satisfy the growing needs of high performance applications with low power constraints. An important aspect that has propelled this solution is effective task/application scheduling and mapping algorithms for multiprocessor systems. This work proposes an energy aware, offline, probability-based unified scheduling and mapping algorithm for multiprocessor systems, to minimize the number of processors used, maximize the utilization of the processors, and optimize the energy consumption of the multiprocessor system. The proposed algorithm is implemented, simulated and evaluated with synthetic task graphs, and compared with classical scheduling algorithms for the number of processors required, utilization of processors, and energy consumed by the processors for execution of the application task graphs.

• Korean Journal of Mathematics
• /
• 제24권2호
• /
• pp.199-213
• /
• 2016

The resolvent operator approach of [2] is applied to solve a set-valued variational inclusion problem in ordered Hilbert spaces. The resolvent operator under consideration is called relaxed resolvent operator and we demonstrate some of its properties. To obtain the solution of a set-valued variational inclusion problem, an iterative algorithm is developed and weak-RRD set-valued mapping is used. The problem as well as main result of this paper are more general than many previous problems and results available in the literature.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.816-820
• /
• 2009

In landscape simulatin, it is necessary to express very realistic image generated by computer graphics. One solution is to use texture mapping; however, it needs a lot of work and time to obtain images for texture mapping since there are huge variety of images for buildings, roads, stations and so on, and the landscape image is diverse due to the weather and time. Especially, weathered images such as stain on walls, crack on roads and so forth, are needed to make the landscape image very realistic. These weathered images do not have to be strict so that it saves a lot of work and time for obtaining the images for texture mapping if we can generate a variety of weathered images automatically. Therefore, this paper describes how to generate a variety of weathered images automatically by changing the weathered shape of the original image.