Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Prediction of Temperature Distribution in Pipe Girth Welding by Mapping Theory

사상 이론을 이용한 파이프 원주 용접의 온도 분포 예측에 관한 연구

  • Published : 2000.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

Gas tungsten arc(GTA) welding is used to rrpiar the seat ring in swing type check valve in power plant because of its high weld quality. In order to automate the welding process, it is needed to analyze the process of inside pipe girth welding. In this study, the shapes of weld bead on pipe inside and outside were predicted and its validity was investigated. On the assumption that the welding arc had a bivariate gaussian distribution, analytical solution was derived to predict the temperature distribution in pipe weld using mapping under consideration of physical relationships. The size of weld bean could be predicted from this equation and its accuracy was verified by experiments.

Keywords

References

  1. Kazakov, Y., Saifeev, R. and Bubnov, B. V., 1993, 'Efficiency on the Need to Regulate Heat Input when Welding Circular and Annular Joints,' Welding Int., 7, pp. 647-650
  2. Rosenthal, D., 1941, 'Mathematical Thoery of Heat Distribution during Welding and Cutting,' Welding Research Supplement, Vol. 20, pp. 220-234
  3. Tsai, C., 1982, 'Modeling of Thermal Behaviors of Metals during Welding,' Trends in Welding Research in the US. American Soc. for Metals, pp. 91-108
  4. Malmuth, N., 1976, 'Temperature Field of a Moving Point Source with Change of State,' Int. J. Heat Mass Transfer, Vol. 19, pp. 349-354 https://doi.org/10.1016/0017-9310(76)90090-9
  5. Nuners, A., 1983, 'An Extended Rosenthal Weld Model,' Welding Research Supplement, Vol. 62, June, pp. 165-170
  6. Eager, T. and Tsai, N., 1983, 'Temperature Fields Produced by Travelling Distribution Heat Sources,' Welding Journal, Vol. 62, Dec, pp. 346-355
  7. Boo, K. S., 'Transient Temperature Distribution in Arc Welding of Finite Thickness Plates,' Proc. Instn. Mech. Engrs., Vol. 204, pp. 175-183
  8. Jeong, S. K., 1997, 'An Analytical Solution to Predict the Transient Temperature Distribution in Fillet Welds,' Welding Journal, June, pp. 223-232
  9. Lho, T. J., 1992, 'A Study on Process Analysis and Welding Parameter Optimization in the GTA Circumferential Pipe Welding,' Ph. D. Dissertation, KAIST
  10. Kendall Atkinson, 1993, Elementary Numerical Analysis, Wiley