• Corrosion Science and Technology
• /
• 제11권6호
• /
• pp.280-285
• /
• 2012

Aluminum is on active metal, but it is well known that its oxide film plays a role as protective barrier which is comparatively stable in air and neutral aqueous solution. Thus, aluminum alloys have been widely applied in architectural trim, cold & hot-water storage vessels and piping etc., furthermore, the aluminum alloy of AC8A have been widely used in mold casting material of engine piston because of its properties of temperature and wear resistance. In recent years, the oil price is getting higher and higher, thus the using of low quality oil has been significantly increased in engines of ship and vehicle. Therefore it is considered that evaluation of corrosion resistance as well as wear resistance of AC8A material is also important to improve its property and prolong its lifetime. In this study, the effect of solution and tempering heat treatment to corrosion and wear resistance is investigated with electrochemical method and measurement of hardness. The hardness decreased with solution heat treatment compared to mold casting condition, but its value increased with tempering heat treatment and exhibited the highest value of hardness with tempering heat treatment temperature at $190^{\circ}C$ for 24hrs. Furthermore, corrosion resistance increased with decreasing of the hardness, and decreased with increasing of the hardness reversely. As a result, it is suggested that the optimum heat treatment to improve both corrosion and wear resistance is tempering heat treatment temperature at $190^{\circ}C$ for 16hrs.

• 멤브레인
• /
• 제22권3호
• /
• pp.178-190
• /
• 2012

침지법 상전이 공정 방법으로 polysulfone (PSF) 분리막을 제조하였다. PSF/NMP/PVP/phosphoric acid의 캐스팅 용액과 물 침전조를 이용하여 분리막을 제조하였다. 증기 유도 상전이법과 비용매 유도 상전이법을 연속하여 적용함으로서 캐스팅 용액에 첨가된 인산의 영향이 분리막의 구조 및 투과량에 미치는 영향을 살펴보았다. 미량의 인산의 첨가로도 평균 기공의 크기, 공극률, 수투과량의 증가를 볼 수 있었다. 또한 분리막의 구조가 치밀한 스펀지 형태의 구조에서 비대칭성이 향상된 구조로 변화함을 확인할 수 있었다. PSF/NMP/PVP/phosphoric acid/BE를 함유한 캐스팅 용액을 준비한 후 동일한 조건으로 증기 유도 상전이법과 비용매 유도 상전이법을 연속하여 적용하여 분리막을 제조하였다. BE의 첨가는 평균 기공의 크기를 거의 0.1 ${\mu}m$ 정도 향상시키는 효과를 가져왔으며 수 투과 유량 또한 10~12 $L/cm^2{\cdot}min{\cdot}bar$ 향상시키는 결과를 나타내었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.1191-1192
• /
• 2013

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2000년도 춘계총회,특별강연,심포지움,연구발표회
• /
• pp.46.2-46.2
• /
• 2000

• Bulletin of the Korean Chemical Society
• /
• 제35권5호
• /
• pp.1491-1494
• /
• 2014

High-crystallinity poly(3-hexylthiophene) (P3HT) thin films were prepared by aging the precursor solutions, prepared using a good solvent, chloroform, at low temperatures prior to spin-casting. Lower solution temperatures significantly improved the molecular ordering in the spin-cast P3HT films and, therefore, the electrical properties of field-effect transistors prepared using these films. Solution cooling enhanced the electrical properties by shifting the P3HT configuration equilibrium away from random coils and toward more ordered aggregates. At room temperature, the P3HT molecules were completely solvated in chloroform and adopted a random coil conformation. Upon cooling, however, the chloroform poorly solvated the P3HT molecules, favoring the formation of ordered P3HT aggregates, which then yielded more highly crystalline molecular ordering in the P3HT thin films produced from the solution.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1995년도 춘계 총회 및 학술발표회
• /
• pp.45-45
• /
• 1995

Filtration, one of the most important process in the various industrials, is defined as the separation of two or more compounds from a fluid by passing the mixture refers to the separation of solid, immisible particles from liquid or gaseous mixture. Membrane filtration which is a type of filtration extends it's application further to include the separation, concentration, and filtration. The main objective of this investigation is the preparation of organic solvents-resistant polyimide membranes by using phase inversion technique and their application as a UF membrane. Specially, the dope solution was prepared from the newly developed method. The newly developed method is that the dope solution was directly prepared from the polyimide solution which was prepared by the modified one-step polymerization. The effects of the parameters for membrane preparation such as the casting solution composition and the casting conditions were investigated and the performance and chemical stabfiity of membrane are going to be tested.

• 한국정밀공학회지
• /
• 제19권10호
• /
• pp.77-83
• /
• 2002

Magnesium alloys casting are gaining increased acceptance in the automotive and electronic industeries and die casting is the most efficient method of manufacturing such mass produced parts. This study has been investigated the microstructures and mechanical properties of Mg-9Al-lZn alloy fabricated by die casting process for development of air bag case. The microstructure of die casted specimen were composed of pro-eutectic magnesium solid solution and $\beta$(Mg17Al12) precipitates. The tensile strength of as-fabricated Mg-9Al-lZn alloy revealed 231.4MPa. It was found that Mg-9Al-lZn alloy have good corrosion resistance in electrochemical polarization test.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권3호
• /
• pp.376-391
• /
• 2013

Brackets in ships and offshore structures are added structures that can endure stress concentrations. In this study, a concurrent engineering solution was proposed, and a high strength low carbon cast steel alloy applicable to offshore structures was designed and developed. The yield strength and ultimate tensile strength of the designed steel were 480 and 600 MPa, respectively. The carbon equivalent of the steel was 0.446 with a weld crack susceptibility index of 0.219. The optimal structural design of the brackets for offshore structures was evaluated using ANSYS commercial software. The possibility of replacing an assembly of conventional built-up brackets with a single casting bulb bracket was verified. The casting process was simulated using MAGMAsoft commercial software, and a casting fabrication process was designed. For the proposed bulb bracket, it was possible to reduce the size and weight by approximately 30% and 50%, respectively, compared to the conventional type of bracket.

• 센서학회지
• /
• 제29권5호
• /
• pp.332-335
• /
• 2020

Drop casting, a solution process, is a simple low-cost fabrication technique that does not waste material. In this study, we elucidate the effect of the concentration of a InGaZnO solution on the electrical properties of drop-cast oxide thin-film transistors. The higher the concentration the larger the amount of remnant InGaZnO solutes, which yields a thicker thin film. Accordingly, the electrical properties were strongly dependent on the concentration. At a high concentration of 0.3 M (or higher), a large current flowed but did not lead to switching characteristics. At a concentration lower than 0.01 M, switching characteristics were observed, but the mobility was small. In addition to a high mobility, sufficient switching characteristics were obtained at a concentration of 0.1 M owing to the appropriate thickness of the semiconductor layer. This study provides a technical basis for the low-cost fabrication of switching devices capable of driving a sensor array.

• 한국분말재료학회지
• /
• 제18권2호
• /
• pp.176-180
• /
• 2011

Study of the main properties of PVDF films produced by two processing technologies such as hot pressing from a melt or solution casting was the aim of this paper. All samples were prepared of as-received PVDF powder. First group of samples was prepared by the hot pressing. Second group of samples was prepared by the solution casting method. PVDF powder was dissolved in dimethylformamide. To characterize properties of samples, different experimental methods such as FRA (dielectric spectroscopy), IR-spectroscopy and DSC/TGA analysis were used in this work. It was found that IR-spectra of both studied groups do not change compared to that for virgin PVDF powder. It confirms that molecular structure is practically independent on the processing technology of samples. The only difference has been found that new band centered at $1723\;cm^{-1}$ appears for samples prepared by the hot pressing method. This absorption band is related with formation of C=C bonds in samples prepared by the hot pressing method in contrast both to PVDF powder and samples prepared by the solution casting method.