• Journal of Bio-Environment Control
• /
• v.16 no.4
• /
• pp.328-332
• /
• 2007

This study was conducted to investigate the effects of high concentrations of salts in soil on the growth, yield, quality, photosynthetic rate, and mineral uptake of tomato ('House Momotaro') in pot cultivation. The growth of tomato such as plant height, top plant weight and root weight decreased as the concentrations of salts in soils increased. Yield decreased by 31% and 41% in EC 5.0 and $7.5dS{\cdot}m^{-1}$, respectively compared with the salt concentration of EC $1.5dS{\cdot}m^{-1}$. Yield reduction was caused by low mean weight and number of fruit if at high salt concentration in soil, and affected by low photosynthetic rate and water potential in leaf, The rate of blossom-end rot was highest (16.7%) in EC $7.5dS{\cdot}m^{-1}$ and increased as the concentrations of salts in soils increased. The contents of soluble solids and titratable acids showed a tendency to increase with increasing the concentrations of salts in soils. Photosynthetic rate, water potential and stomatal conductance in leaf decreased as the salt concentration in soil increased. The higher the salt concentration in soil, the lower the mineral uptake such as T-N, P, K, Ca and Mg but, the higher the content of Na.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.1
• /
• pp.72-78
• /
• 2020

In this study, miscanthus with C/N ratio of 224 were applied to the soil and treated with 0 (control), 10 tons and 20 tons·ha^-1 to improve the soil and promote crop growth. As a result, soil organic matter content increased from 11.0 g·kg^-1 before the test to 16.3 after 3 years. Soil cation exchangeable capacity increased to 15.3 cmol_c·kg^-1 after 3 years. In the sweet sorghum, stem was the most thickest at 20 tons·ha^-1 application of miscanthus and the highest juice amount per plant was 60 ml. The yield index multiplied by the soluble solids content of juice and juice amount was the highest at 1,913 for 10 tons application and 1,851, 1,839 for 20 tons, control respectively. Number of sweetpotato storage root were 2,9 in 20-tons application plot, the same as control, and 10-tons application plot was 3.6, the most. Two-year average yields of 20 tons plot and control were low at 2,579 kg/10a and 2,708 respectively, and 10 tons plot was the highest at 3,289. For onions, the biomass application did not effect the yield. but onion plant and leaf length were longer in 20 tons plot than in control or 10 tons. The yield of garlic was 2,630~2,901 kg/10a and there was no effect of miscanthus application. Plot of 10 tons application were the longest in plant and leaf length, and the number of scale was 8.2-8.3 per in bulb, and 8.9 tons·ha^-1 in control. Therefore, it was confirmed the possibility that miscanthus biomass application of about 10 tons·ha^-1 could improve the soil condition and promote crops growth and yield.

• The Korean Journal of Mycology
• /
• v.3 no.1
• /
• pp.1-19
• /
• 1975

Since the importance of casing in fruit body formation of Agaricus bisporus has been emphasized, physico-chemical characteristics of casing materials were discussed by many workers and a mixture of peat and mineral soil as proper casing material has been adopted in many of mushroom growing countries. Because of limited resources of peat in Korea, it is necessary to find practical performance and substitutional materials for casing. The effect of casing on mycelial growth and mushroom yield of A. bisporus varied with materials, its combination and practices etc. The experiments to be discussed in this paper are concerned with pH and Ca of casing material which influence A bisporus, and changes of physico-chemical characteristics with mixing ratio of casing materials and its effect on A. bisporus. The optimum range of moisture content of each material, management of watering and application of physico-chemical characteristics casing materials was also investigated and re-use of weathered spent compost for casing material was described. 1. The effect of calcium on mycelial growth of A. bisporus at various pH in Halbschalentest showed different results with calcium sources. Best results were obtained around neutrality and fresh weight of fruit bodies grown in the range of pH 7 to 8 was highest among the tested levels. 2. Available moisture, pore space, organic matter, cation exchangeable capacity and exchangeable cation was increased by an increase of mixing ratio of peat in casing materials, while an adverse effect was obtained by addition of sand. 3. Mycelial growth on clay loam was more rapid at a lower bulk density of 0.75g/cc and at 20% moisture content on a dry weight basis at the same bulk density. 4. Mixing ratio of casing materials, 60 to 80 per cent by volume of peat mixed with 20 to 40 per cent of clay loam produced the highest yield of fresh fruit bodies and sand the lowest. However, per cent of open cap was highest in peat and lowest in sand. 5. Days required for fruit body initiation was shortened in mixtures of peat and clay loam by one to three days compared with other materials and the formation of flushes was clear. 6. The effect of some physico-chemical characteristics of casing materials on the fresh weight of fruit bodies were estimated by a multiple regression equation; Y=-923.86+$8.18X_1+8.04X_2+7.90X_3+0.12X_4+2.03X_5-0.82X_6-0.54X_7$ where $X_1,X_2,X_3,X_4,X_5,X_6,X_7$ are sand, silt, clay, available moistuer, porosity, organic matter and exchangeable cation respectively. The productivity of certain casing material could be predicted from this equation. 7. Fresh weight of fruit bodies was positively correlated with porosity exchangeable cation, organic matter, available moisture, silt and clay of materials; while sand was negatively correlated. On the contrary, sand was the unique factor reducing per cent of open cap. 8. Distribution of three phases of high productive casing material was concentrated in the range of 10 to 30 per cent solids, 15 to 30 per cent liquids, and 50 to 60 per cent in air volume. 9. Fresh weight of fruit bodies from peat was not affected with heavy watering but in clay loam and sandy loam severe crop losses occurred. Fresh weight of individual fruit was increased and open caps were decreased with heavy watering but light watering resulted in adverse effects: its effect was especially great in peat. 10. Optimum range of moisture content by weight on a dry basis was different with each casing material. To maintain optimum moisture content concerned with yield of fruit bodies and open cap, sandy loam and peat mixtures required daily watering of 0.6, 0.6 to 1. 2 and 1.2 to 2.4 liters per $3.3m^2$ of bed area, respectively. 11. Maximum yield of fruit body was recorded in the range of pF 2. 0 to 2. 5 of casing materials if organic matter content was below 4.2 per cent and in pF 1. 3 to 1.8 if above 7.1%. 12. pF curve of a certain casing material could be draws from moisture content at various pF values by multiple regression equations provided texture, organic matter and calcium of the casing material are given. Optimum moisture range of the casing materials also could be estimated by the equation. 13. It was possible to improve the phyico-chemical characteristics of clay loam and sandy loam by addition of weathered spent compost although the effect was less than in the case of peat. Fresh weight of fruit bodies wsa increased by addition of weathered spent compost but its effect was not as remarkable as peat. Accordingly, further studies will be required.

• Journal of the Korean Chemical Society
• /
• v.42 no.6
• /
• pp.672-678
• /
• 1998

Chitin was extracted from crab shell of Portuns triberculatus and deacethylated to yield chitosan with various molecular weights. The absorption and the fluorescence spectra of Rhodamine 6G(Rh 6G)-sodium dodecyl sulfate(SDS) and Rh 6G-chitosan systems were obtained. From the spectra, we observed that the absorption and the fluorescence intensity of Rh 6G-SDS system decreased when S/D(the concentration of SDS to that of Rh 6G ratio) was below or at 32, while they increased when S/D was above 32. From the suspended solid(SS) removal rate and the transmittance of Rh 6G-SDS-chitosan system, we found that when S/D ratio was 32 its flocculating behaviour was much stronger than Rh 6G-SDS system. As the concentration and the molecular weight of chitosan increased, we also found that S/D range was extended from 32 to 100. With increasing the molecular weight of chitosan, the SS removal rate increased around pH 2~9 but decreased remarkably at pH>12.

• Journal of Bio-Environment Control
• /
• v.15 no.4
• /
• pp.322-326
• /
• 2006

This experiment has investigated the effects of silicon on albinism of strawberry. Albino fruit appeared after a month of treatment of potasium silicate(Si) in nutrient solution. When $200mL{\cdot}L^{-1}$ of Si applied, number of albino fruit increased over 90% of total amount of fruit, and the symptom remained latest any other treatment. The fruit length of the strawberries in Si treatments were longer than control treatment. However, the diameter and weight of fruit decreased in treatment of Si. The soluble solids of fruits, numbers of fruit and yield per plant were no significant differences among treatments. The rate of albino fruit was significantly increased with increase of concentration of Si. The results of this experiment will be utilized for the cultivation in the new substrate application for strawberry hydroponics.

• Asian-Australasian Journal of Animal Sciences
• /
• v.10 no.6
• /
• pp.581-586
• /
• 1997

The present study analysed the various productive and reproductive characteristics of 1/2 Pabna Milking Cows (PMC)-1/2 Sahiwal (S) and 1/4 PMC-3/4 S collected from the Pabna milkshed area at Baghabarighat, Sirajgonj, Bangladesh. The studied traits were birth weight (BWT), age at puberty (AP), number of services per conception (NSC), post partum heat period (PPHP), gestation period (GP), daily milk yield (DMY), lactational production (LP), lactation length (LL), fat percentage and solids-not-fat percentage (SNFP). Five individual Sahiwal sires were used for the upgrading of Pabna Milking Cows. The used data covered from 1987 to 1994. Least-squares analysis of variance showed that genetic group had a significant effect on BWT (P < 0.05), AP (p < 0.01), DMY (p < 0.01), LP (p < 0.001), LL (p < 0.05), FP (p < 0.05) and SNFP (p < 0.01). Genetic group had non-significant effect on NSC, GP and PPHP. The effect of sire was significant on BWT (p < 0.01), NSC (p < 0.01), LP (p < 0.05) and LL (p < 0.05). The AP, NSC, DMY, LP, LL and SNFP were higher in 1/2 PMC-1/2S cows; BWT and PPHP were higher in 1/4 PMC-3/4S but GP and FP were almost same in both genetic groups. From this study it may be concluded that production and use of 1/2 PMC-1/2S would seem more profitable for commercial milk production in the Bangladesh Milk Producers' Cooperative Union Limited (BMPCUL) area and at the same time emphasis should be given on rigorous sire selection.

• Asian-Australasian Journal of Animal Sciences
• /
• v.7 no.3
• /
• pp.383-387
• /
• 1994

Six heifers each of $F_1$, $F_2$, $F_3$, $F_4$ H. Friesian $\times$ Sahjwal halfbreds and pure Sahiwal with overall average initial age and live weight of $315.6{\pm}134.8 days$ and $143.8{\pm}48.5kg$, respectively were used for this study. The under trial animals were fed according to N.R.C. (1978). The overall average age at maturity, first conception and first calving was $563.8{\pm}116.8$, $675.8{\pm}135.6$ and $956.8{\pm}149.8days$ with live weights as $302.2{\pm}58.6$, $342.6{\pm}41.5$ and $433.9{\pm}38.1kg$, respectively. The overall 305 days and total milk yield for 1st lactation was $2,729.0{\pm}669.3$ and $2,992.7{\pm}377.5litre$ while the FCM (at 4%) was $2,934.2{\pm}410.8litre$. The lactation length was $336.6{\pm}69.6days$. The fat and solids not fat contents were $4.5{\pm}0.2$ and $8.2{\pm}0.3percent$, respectively. The milk production in Sahiwal cows was significantly lower than crossbred cows. The services per conception were $2.5{\pm}1.3$. The overall per head per day consumption of DM, TCP and ME was $10.9{\pm}1.2kg$, $1,399{\pm}199gm$ and $22.6{\pm}2.4 M.Cal.$, respectively. The overall milk producing efficiency for the production of one litre of FCM was $1.12{\pm}0.15kg$ of DM, $142.2{\pm}17.76gm$ of TCP and $2.31{\pm}0.27M.Cal.$ of energy while the feeding cost was Rs. $1.46{\pm}0.22$ per litre of FCM produced. The feeding cost per litre FCM was significantly higher in Sahiwal and $F_2$ than in other genetic groups.

• Microbiology and Biotechnology Letters
• /
• v.20 no.4
• /
• pp.477-482
• /
• 1992

A bacterial strain Acinetobacter calcoaceticus was examined for its ability to degrade fats, oils and hydrocarbons, and tested for the possibility of application in wastewater treatment. All fats and oils tested were degraded by the strain. About 60% of hexadecane, 26% of fish oiL and 40-54% of vegetable oils were consumed respectively in shaking-flask culture. Saturated fatty acid compositions were about 55% in fish oil and 6-12% in vegetable oils. Increases in cell mass were accompanied with decreases in the concentrations of carbon sources. When jar fermentor in place of shaking-flask was used as a culturing vessel. above 80% of all carbon sources was consumed and yield of cell mass was improved to nearly 1.00. Synthetic wastewaters containing 3% of fat, oil, or hydrocarbon as a sale ca,bon source were treated sequentially with A. calcoaceticus first and then exposed to activated sludge. The concentrations of carbon sources were decreased below 0.06% through the process, and the concentrations of suspended solids were lower than 53 mglml. The data imply the potential use of A. calcoaceticus in wastewater treatment.

• Journal of Animal Environmental Science
• /
• v.7 no.3
• /
• pp.169-172
• /
• 2001

This research was carried out to investigate the quantity of Holstein milking cow manure excreted and their characteristics. The average body weight of the Holstein milking cow during experiment was 550.0kg, and fried intake(DM basis), water consumption, milk yield was 16.7, 85.4, 24.4k7/day/head, repectively. The average manure production of Holstein milking cow was 63.5kg/day/head(feces 42.3, urine 10.2kg). The average moisture content of feces and urine was 83.9%, 96.9%, respectively. Wastewater pollutant concentration of $BOD_5$(Biochemical Oxygen demand). $COD_{Mn}$ (Chemical Oxygen demand), SS(Suspended Solids), T-N(Total Nitrogen) and T-P(Total Phosphorus), excreted from Holstein milking cow was 16,560, 40,329, 78,500, 2,854, 577mg/ l in feces and 4,580, 7,575, 370, 4,164, 7mg/ l in urine, repectively.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.7
• /
• pp.2213-2218
• /
• 2012

Efficient synthetic routes were developed to prepare a sizable amount (4-15 grams) of the chiral epoxides 4-6 as versatile intermediates for the synthesis of aspartyl protease inhibitors of therapeutic interest such as HIV protease and ${\beta}$-secretase. Oxidative cleavage of the C(2)-C(3) double bond of L-ascorbic acid followed by functional group manipulation led to the preparation of the epoxide 10, which was opened with an azide to yield a common aziridine intermediate 12. Through opening of the aziridine ring of 12 with either a carbon or a sulfur nucleophile, chiral epoxide precursors 4-6 could be prepared for various HIV protease inhibitors. Except for the final low melting epoxides 5 and 6, all intermediates were obtained as crystalline solids, thus the synthetic pathway can be easily applied to a large-scale synthesis of the chiral epoxides.