• Journal of the Korean Society of Food Science and Nutrition
• /
• v.23 no.4
• /
• pp.660-665
• /
• 1994

Treatment of rice-washing wastewater was considered under various pH levels and chitosan concentrations. Compared with the control test, addition of chitosan at the various concentrations did not noticeably enhanced turbidity reduction at pH 4 and 5 , but greatly enhanced at above pH 6. However, reduction of turbidity in the wastewater, irrespective of chitosan concentrations, was the greatest at pH 4 and became lower by increasing pH. Suspended solids in the wastewater were the most effectively recovered by pH adjustment of the wastewater to 4 followed by centrifugation, with over 99% reduction in turbidity . Different concentrations of suspended solids in the wastewater and various kinds of acids used for p/H adjustment did not affect turbidity reduction. Increasing storage periods of the wastewater resulted in lower reductions in turbidity.

• Food Science and Preservation
• /
• v.2 no.2
• /
• pp.251-257
• /
• 1995

In order to determine the quality of Citrus unshiu(medium cultivar of satsuma mandarin) produced in Cheju, citrus fruits sampled at sorting places and harvested directly on citrus tree in south and north area of Cheju were analyzed. The fruits were grown in size till early of November, and soluble solids were increased continuously after that. Compared with the quality of citrus fruits as a factor of soluble solids, firmness, total sugar, pH, and color index, the optimum harvest periods were supposed to be reasonable from early of December for C. unshiu Marc. var. yonezawa and C. unshiu Marc. var. hayashi, Fruit weights and peel thickness had a linear correlation with increasing fruit size, but soluble solids and acid contents had not a correlation. The selection of C. unshiu variety was needed to determine by the properties of storage.

• Preventive Nutrition and Food Science
• /
• v.8 no.3
• /
• pp.225-229
• /
• 2003

Clarified apple, carrot and orange juices were prepared using ultrafiltration and their single and blend juices were further concentrated using ultrafiltration, freeze-drying, and rotary evaporation. Effect of concentration methods on the quality of concentrated single juices and juice blends was investigated. Turbidity values of samples concentrated by evaporation were significantly higher than those prepared by ultrafiltration and vacuum freezing regardless of juice source (i.e., apple, orange or carrot) or blending (p<0.05). The highest soluble solids contents were obtained for the samples concentrated by evaporation process. Concentrated apple juice contained significantly higher amount of vitamin C and soluble solids than concentrated orange and carrot juices regardless of concentration methods (p<0.05). For blended samples, no direct relationships between blend ratio and total amount of vitamin C were found; however, samples contained more apple juice showed the highest value of soluble solids regardless of concentration methods.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.4
• /
• pp.34-45
• /
• 2001

In the persent study, we conducted numerical experiments using a three-dimensional baroclinic equation model and a Lagrangian method for clarifying the hydrodynamics in Osaka Bay under the yearly mean discharge and visualizing the behaviour of particles of different settling velocity discharged from Yodo River and sedimentation pattern on the sea bottom. Particles are transported from the Yodo River to the south direction by the residual circulation of the bay head at the first stage, and after most of suspended solids particles are settled down at any layer and returned in the south-east coastal area through bottom layers by an estuarine circulation. The results show that estuarine circulation plays an important part of suspended solids transportation in the Osaka Bay.

• Computers and Concrete
• /
• v.7 no.4
• /
• pp.331-346
• /
• 2010

We present a quadrilateral finite element with an embedded crack that can be used to model tensile fracture in two-dimensional concrete solids and the crack growth. The element has kinematics that can represent linear jumps in both normal and tangential displacements along the crack line. The cohesive law in the crack is based on rigid-plasticity with softening. The required material data for the concrete failure analysis are the constants of isotropic elasticity and the mode I softening curve. The results of two well known tests are presented in order to illustrate very satisfying performance of the presented approach to simulate failure of concrete solids.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.341-348
• /
• 2001

A Mixed Volume and Boundary Integral Equation Method is applied for the effective analysis of plane elastostatic problems in unbounded solids containing general anisotropic inclusions and voids or isotropic inclusions. It should be noted that this newly developed numerical method does not require the Green's function for anisotropic inclusions to solve this class of problems since only Green's function for the unbounded isotropic matrix is involved in their formulation for the analysis. This new method can also be applied to general two-dimensional elastodynamic and elastostatic problems with arbitrary shapes and number of anisotropic inclusions and voids or isotropic inclusions. Through the analysis of plane elastostatic problems in unbounded isotropic matrix with orthotropic inclusions and voids or isotropic inclusions, it will be established that this new method is very accurate and effective for solving plane elastic problems in unbounded solids containing general anisotropic inclusions and voids or isotropic inclusions.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.531-534
• /
• 2006

A multi-scale (macro-micro) finite element framework for analysis of polycrystalline solids is suggested. The proposed frame work is strongly-coupled in a sense that the two scale calculation is performed at the same time. The issue of averaging micro-scale material stress and stiffness is addressed and a strategy is proposed. The proposed framework is implemented and applied to two examples having different geometries and loading modes. It is concluded that the proposed multi-scale framework can be used for more detailed and accurate analysis compared with the single-scale finite element analysis.

• Journal of the Korean Society of Combustion
• /
• v.21 no.1
• /
• pp.18-30
• /
• 2016

Pyro-process of solids is the way to heat solid materials under high temperature. In this processing, energy efficient use is one of the main concerns due to its high energy consumption of bulk materials. To calculate the energy use of processes, heat & mass balance in simplified 0-dimensional model was performed. Energy calculation by this simplified model can lead to confusion due to simplification. Thus, it is necessary to understand considerations of energy analysis. In this study, cement manufacturing as a very common example of pyro-processing of solids, was introduced for explaining considerations of energy analysis for energy efficient use.

• Korean Journal of Food Science and Technology
• /
• v.25 no.5
• /
• pp.589-591
• /
• 1993

Effects of enzymatic hydrolysis of polysaccharides with using three commercial mixed enzymes (Ultrazyme, Celluclast, Viscozyme) were investigated on supernatant ratio, solid yields and viscosity of sea mustard extracts. The result showed that enzymatic hydrolysis prior to extraction increased the solids concentration up to 27.3% and the solids yield up to 14.0%. However the supernatant ratio after centrifugation of the sea mustard suspension was rather reduced. The viscosity of the extracts was significantly increased during initial enzymatic hydrolysis.

• Journal of the Korean Society of Industry Convergence
• /
• v.16 no.4
• /
• pp.133-140
• /
• 2013

This paper presents an overview of the concepts of optimal feeder design in relation to the loading of bulk solids for Automatic filling system that should be control the amount of goods and packaging to seal. Feeder modular device, important parts of the package, so in order to perform a conceptual design optimization techniques are applied in two steps. First of all derive the problems through structural analysis for the conceptual model of vibrating feeder. Secondly derive reasonable design model based on the results of the structural analysis of modified boundary shape and then verify it. The proposed system has the following goal that is satisfies the dynamic stability with minimum weight and optimization of the shape. As a result, the weight reduction of feeder is 2.1% and 7% increase in the natural frequency.