• Fire Science and Engineering
• /
• v.23 no.5
• /
• pp.9-16
• /
• 2009

Chemical products have had an favorable influence on our everyday life, and contributed very much to the development of human culture. According to the rapid change of industry and the development of scientific technique the using chemical products are increasing more and more. Chemical products can have any hazardous property such as flammability or explosiveness. There are occurring many accidents in the international trade due to the different classification and labelling of chemicals produced in various countries. The main purpose of this work is the development of global standard test methods for the chemicals, and the classification and labelling in building block approach by means of the basic technical data. Oxidizing solids, combustible solids, spontaneously combustible materials, water-prohibitive materials, flammable liquids, self-reactive materials and oxidizing liquids have been classification The first Experiment have tested Oxidizing solids of third five. The results have been classified according to the hazard material safety regulation and the UN regulation, and summarized in a data-base.

• Korean Journal of Food Science and Technology
• /
• v.20 no.2
• /
• pp.205-212
• /
• 1988

The effect of physicochemical characteristics on the freezing point depression of garlic bulb was studied to examine the reasons of cryoprotectivity in garlic bulb stored at subzero temperature. The composition of fresh garlic was characterized by having high soluble solids($40^{\circ}$ Brix; 90% on dry basis), comparing with $10^{\circ}$ Brix in case of other fruits and vegetables. Soluble solids were composed of 70% sugars, 20% protein, and 10% insoluble solids(including 3% of ash, 3% of crude fiber, and 4% of fat). The main component of sugars in garlic was fructosan with 1-29 degree of polymerization(D.P) and the fructosan of 4-5 D.P was over 50% of total fructosan. Freezing point of garlic bulb, which is a parameter of cryoprotectivity, was depressed as the concentration of soluble solids increased, and as the D.P value decreased in the same concentration of soluble solids.

• Journal of agriculture & life science
• /
• v.46 no.1
• /
• pp.105-111
• /
• 2012

This study was conducted to evaluate the influence of fruit setting order by flower cluster on the fruit weight and the soluble solids content for the strawberry of 'Seolhyang' cultivar. The first flower cluster had higher fruit number, fruit weight, soluble solids content and ratio of large fruit compared to the second and third flower cluster. The fruit set on the upper position fruit in the same flower cluster had higher fruit weight and the soluble solids compared to the fruit set on the lower position fruit in the flower cluster. The fruit weight was highly positive correlated with the soluble solids content. The result indicated that the number of fruit set for marketable yield seemed to be 9-10 per the first flower cluster, 6 per the second flower cluster, 4 per the third flower cluster and 3 per the fourth flower cluster in 'Seolhyang' cultivar.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.2
• /
• pp.39-44
• /
• 2011

Plastic gradient from geometrically necessary dislocation(GND) can strongly affect micro-scale plastic behavior of polycrystalline solids. In this research, mechanical behavior of polycrystalline solid is investigated using the finite element method incorporating plastic gradient from GND effect. Gradient hardness coefficient and material length parameter are used to evaluate the effect of the plastic gradient on the behavior of materials. Sensitivity of the modeling parameters on the plastic gradient from GND is presented and effects of plastic gradient and material parameters on the behavior of single crystal inside a polycrystalline aggregate are investigated. It is confirmed that the plastic gradient from GND amplifies hardening response of polycrystals and affects single crystal behavior embedded in polycrystalline solids.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.11 no.1
• /
• pp.173-179
• /
• 2009

Fruit quality is essential for increasing marketability and consumer acceptance. To suggest an easy method for measurement of squash fruit quality, 10 varieties/cultivars and 1 populations were used as experimental materials. The fruits were harvested in marketable maturity to investigate the relation between quality factors and sensory test. The total solids content is one of the most important factors associated with sensory taste in fruits. The major squash varieties/cultivars such as 'Puthobag', 'Seoulmadi', 'Aehobag 1', 'Aehobag 2', 'Ford Zucchini', and 'Zucchini' showed total solids content of 6.4, 7.5, 7.3, 5.8, 4.7, and 4.30%, respectively. The preference values for 'Puthobag', 'Seoulmadi', 'Aehobag 1', and 'Aehobag 2', which are generally preferable varieties/cultivars, were 4.6, 4.7, 4.8, and 4.3, respectively. On the other hand, the preference values for variety 'Ford Zucchini' and cultivar 'Zucchni', which are not generally preferable, were 1.6 and 1.4, respectively. There was no significant correlation between plant length and total solids content or starch content in the fruits thereby suggesting the possibility of breeding bush type squash cultivars with good taste. This easy method of weighing dry matters of squash fruits might be useful for marketable quality index.

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.3
• /
• pp.304-311
• /
• 1999

This experiment was conducted to find out the optimum condition of aeration rates for removal of malodor and to improve the compost quality. The aspect of ammonia emission and amounts of volatilization were investigated in the enclosed composting reactor of 242 liters piled with mixed materials of dairy manure and rice straw, which adjusted to 65% of initial moisture content and controlled by four different aeration rates. Mature temperature increased suddenly in initial composting time and decreased with Increasing aeration rates. The treatment of $1.79l\;min^{-1}kg\;dry-solids^{-1}$ results in overcooling and rapid drying of composting materials because of too much aeration. The average concentration of ammonia emitted from composting for 24 days was the range of 25.3 to $239.8mg\;l^{-1}$ and was highest in the treatment of $0.09l\;min^{-1}kg\;dry-solids^{-1}$, followed by 0.90. 0.18 and $1.79l\;min^{-1}kg\;dry-solids^{-1}$. The range of maximum concentration by different aeration rates was $335{\sim}2279mg\;l^{-1}$ and it wan highest in the treatment of $0.09l\;min^{-1}kg\;dry-solids^{-1}$, followed by 0.18, 0.09 and $1.79l\;min^{-1}kg\;dry-solids^{-1}$. Relationship between the ammonia concentration emitted and temperature matured under different aeration rates showed an exponential positive correlation with 1% significance and had a trend of clear increase in ammonia concentration with increasing temperature over $50^{\circ}C$. Most of ammonia volatilized within plays after composting. The volatilization rate of ammonia ranged from 0.056 to 0.453 per dry solids of materials and it was highest in the treatment of $0.09l\;min^{-1}kg\;dry-solids^{-1}$, followed by 0.18, 0.09 and $1.79l\;min^{-1}kg\;dry-solids^{-1}$. Amounts of ammonia volatilized under composting condition of this experiment was estimated to be highest in the aeration range of 0.9 to $1.0l\;min^{-1}kg\;dry-solids^{-1}$.

• Korean Journal of Ecology and Environment
• /
• v.39 no.1 s.115
• /
• pp.21-31
• /
• 2006

The objectives of this study were to analyze trends of temporal water quality and trophic state in Andong and Imha reservoirs using chemical dataset during 1993 ${\sim}$ 2004, obtained from the Ministry of Environment, Korea. According to long-term limnological analyses, Suspended solids (SS) in Imha Reservoir were 2 ${\sim}$ 8 fold2 greater, than those in SS of Andong Reservoir, and the high solids increased total phosphorus (TP) and biological oxygen demand ($BOD_5$) and decreased the transparency, measured as Secchi depth (SD). Chlorophyll-a (CHL-a) increased little or decreased slightly in the both reservoirs during the high solids, resulting in reduced yields of CHL-a : TP ratios. The deviation analysis of Trophic State Index (TSI) in Imha Reservoir showed that about 70% of TSI (CHL-a)-TSI (SD) and TSI (CHL-a)-TSI(TP) values were less than zero and the lowest values were-60, indicating that influence of inorganic solids (or non-volatile solids) on phytoplankton growth was evident in Imha Reservoir and the impact was greater than that of Andong Reservoir. Inorganic solids in Imha Reservoir resulted in light limitation on phytoplankton growth and thus contributed variations in the relations among three parameters of trophic state index. Especially, seasonal data analysis of nutrients in both reservoirs showed that during the postmonsoon, mean TP concentration was Imha Reservoir greater in than that in Andong Reservoir. The higher TP concentrantion was mainly attributed to increases of inorganic solids from soil erosions and nonpoint source inputs within the watershed. The high inorganic turbidity in Imha Reservoir should be reduced for the conservation of water quality for, especially a tap water supply.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.33-37
• /
• 2009

Finite-element methods are used to study non-adhesive, frictionless rough contact of elastic and plastic solids. Roughness on spherical surfaces is realized by self-affine fractal. True contact area between the rough surfaces and flat rigid surfaces increases with power law under external normal loads. The power exponent is sensitive to surface roughness as well as the curvature of spherical geometry. Surface contact pressures are analyzed and compared for the elastic and plastic solids. Distributions of local contact pressure are shown dependent on the surface roughness and the yield stress of plastic solids.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.9
• /
• pp.2007-2010
• /
• 2009

Donepezil hydrochloride is a reversible acetylcholinesterase inhibitor that is used in the treatment of Alzheimer’s disease to improve the cognitive performance. It shows different crystalline forms including hydrates. Therefore, it is very important to confirm the polymorphic forms in the formulations of pharmaceutical materials because polymorphs of the same drug often exhibit significant differences in solubility, bioavailability, processability and physical/chemical stability. In this paper, four different forms of donepezil hydrochloride were prepared and characterized using X-ray powder diffraction, Fourier transform infrared, and solid-state nuclear magnetic resonance (NMR) spectroscopy. This study showed that solid-state NMR spectroscopy is a powerful technique for obtaining structural information and the polymorphology of pharmaceutical solids.

• Computational Structural Engineering
• /
• v.6 no.4
• /
• pp.107-118
• /
• 1993

New methods of visualizing the data from finite element analyses of 3-dimensional solids were developed in this study. Their efficiency and practicality were examined through their application and implementation into a finite element analysis software. The major effort of the study was to provide a way of representing data inside of volume, which is the most difficult problem in the postprocessing of 3-dimensional solids. Section representation, volume slice and separation, and isosurface representation were proposed for this purpose.