• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.565-572
• /
• 2004

Numerical stability analysis of one-dimensional axial flow in solid rocket motors is performed based on the Euler equation coupled with an unsteady combustion equation of solid propellant. In order to check the numerical scheme, behavior of a standing wave in a closed tube is examined. A standing wave in solid rocket motor decays or grows depending on the total effect of propellant combustion, nozzle flow, and so on. The stability boundary of the fundamental mode standing wave is determined by changing one of the combustion parameters. In addition growth rates of the wave are calculated numerically in relatively low Mach number flow region for the motors with different port and nozzle throat diameters. The results obtained here agree well with the approximate solution. The same scheme is applied to a motor with shorter length and L＊-instability is observed.

• Korean Journal of Computational Design and Engineering
• /
• v.17 no.5
• /
• pp.364-374
• /
• 2012

In this paper, we proposed a data structure to represent structural components of solid rocket motors (SRM) in an automated design program. To propose the data structure, we searched the necessary functions for the automated design program should have. In order to design the structural components of solid rocket motors sufficiently with a design program, it should have the functions to represent the shapes of the components, the drawing and analysis models, the design variables, various product structures, interferences, characteristic properties, design equations, and tightening sets. By modifying the data structure of an element object that is a general purpose data structure to represent a general component of a product, a new data structure was proposed to satisfy all the necessary functions with optimum. Finally, a design program for the structural components of solid rocket motors was developed successfully with the proposed data structure.

• International Journal of Aerospace System Engineering
• /
• v.2 no.2
• /
• pp.58-61
• /
• 2015

Combustion instability in solid rocket motors is a long-term open problem since the first rockets were used. Based on the numerous previous studies, it is known that the limit cycle amplitude is one of the key characteristics of the nonlinear combustion instability in solid rocket motors. Flandro's extended energy balance corollary, aims to predict the limit cycle amplitude of complex, nonlinear pressure oscillations for rockets or air-breathing engines, and leads to a precise assessment of nonlinear combustion instability in solid rocket motors. However, based on the comparison with experimental data, it is revealed that the Flandro's method cannot accurately describe such a complex oscillatory pressure. Thus in this work we make modifications of the nonlinear term in the nonlinear wave equations which represents the interaction of different modes. Through this modified method, a numerical simulation of the cylindrical solid rocket has been carried out, and the simulated result consists well with the experimental data. It means that the added coefficient makes the nonlinear wave growth equations describe the experimental data better.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.57-60
• /
• 2005

A diagnostic investigation is carried out to examine the igniter jet turbulence effects on the internal ballistics of solid rocket motors with divergent port. The numerical studies have been carried out with the help of a two dimensional k-omega turbulence model. It was inferred that increasing the igniter jet turbulence intensity is a possible way to decrease the pressure spike and pressurization rate, marginally during the ignition transient, by altering the location of the secondary ignition in solid rocket motors with non-uniform port.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.57-60
• /
• 2008

There exist a lot of factors and restrictions for the design of solid rocket motors like burning rate, of solid propellant, demanded thrust, chamber pressure, diameter, length, weight and acceleration. For the optimization of these factors and restrictions, integrated design software for internal/external ballistic analysis was developed and verified by the performance test of solid rocket motors.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.460-463
• /
• 2011

Different kinds of solid rocket motors manufactured for various aim have their own shelf life. So they must be done away if not used. In general, ammonium perchlorate(AP) has used in the process of solid rocket motors, which is environmental pollutant. Out-burning and out-detonation were usual in the past, but they polluted the surrounding environment and raised safety issues. As an alternative to resolve these, water-washout process to separate the propellant from rocket motors and an eco-friendly way for recovering AP are studied in this paper.

• Advances in aircraft and spacecraft science
• /
• v.9 no.5
• /
• pp.479-491
• /
• 2022

This work concerns the investigation of a Q1D methodology employed to study pressure oscillations in solid rocket motors driven by hydrodynamic instabilities. A laboratory-scale solid motor designed to develop vortex-shedding phenomena is analyzed for the whole firing time. The comparison between numerical results and experimental data shows good agreement regarding pressure oscillations signature, especially in the flute-mode behavior, the typical oscillations frequency trend present in any motor liable to hydrodynamic instabilities. Such result ensures the model capability to cope with this particular kind of pressure oscillations source, allowing the investigation of the phenomenon with a lighter and cost savings methodology than CFD simulations.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.6
• /
• pp.816-821
• /
• 2015

In this paper, an in-flight prediction method of thrust profiles for solid rocket motors is proposed. Actually, it is very difficult to have detailed information about the performance of the rocket motors beforehand because it is quite sensitive to combustion environments. To overcome this problem, we have developed an algorithm for generating in-flight prediction of rocket motor performance in realistic environments via a reference burnback profile and accelerations measured at a short time-interval just after launch. The performance is evaluated through a lot of flight test results.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.275-282
• /
• 2008

This paper presents numerical investigation of multi-phase flow in solid rocket motor nozzle and effect of multi-phases on the performance prediction of the Solid Rocket Motor. Aluminized propellants are frequently used in solid rocket motors to increase specific impulse. An Eulerian-Lagrangian description has been used to analyze the motion of the micrometer sized and discrete phase that consist of the larger particulates present in the Solid Rocket Motor. Uniform particles diameters and Rosin-Rammler diameter distribution method has been used for the simulation of different burning of aluminum droplets generating aluminum oxide smokes. Roe-FDS scheme has been used to simulate the effects of the multi-phase flow. The results obtained show the sensitivity of this distribution to the nozzle flow dynamics, primarily at the nozzle inlet and exit. The analysis also provides effect of two phases on performance prediction of Solid Rocket Motor.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.6 no.1
• /
• pp.30-38
• /
• 2002

Bullet impact tests for two solid rocket motors were performed and its results were compared and analyzed. One was loaded with the existing propellant with decreased weight content of burning rate catalyst and added high density additives to improve mechanical properties and the other was loaded with the existing propellant with decreased weight content of burning rate catalyst to improve its insensitivity as well as to maintain the ballistic performance. The composite cases were used for both motors.