• 한국생물공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.263-267
• /
• 2003

Solid-state fermentation of lovastatin by Aspergillus terreus was investigated using commercially available 1.2 L polypropylene bottle designed for mushroom cultivation. Moist solid raw materials such as com, rice, and soy bean were tested and com was found to be most suitable for an economical production of lovastatin. 50% or higher water addition prior to the sterilization of com was effective for the maximal lovastatin production. About 0.5% (w/w) lovastatin content in dried cells and corn mass was obtained after 20 days of solid-state fermentation at 30$^{\circ}C$. For safety concerns, aflatoxin Bl and citrinin levels after fermentation were assayed but they were not detected. Lovastatin containing cells and corn residue after fermentation were autoclaved, dried, crushed, and fed to chicken for a period of 3 weeks. Approximately 20% reduction of blood cholesterol level of chicken was observed.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.1
• /
• pp.13-16
• /
• 2001

Maltose and soluble starch were used as secondary sources of carbon for glucoamylase production by Aspergillus awamori in solid state fermentation. During batch cultivation, maltose above 2.5%(w/w) repressed glucoamylase production, but, by adding either 2.5% (w/w) maltose or 1.25% (w/w) soluble starch to fed-batch cultivations, glucoamylase activity was increased by 15% and 170% over standard medium, respectively. The data showed that maltose is a weak inducer of glucoamylase production in solid stat fermentation.

• Mycobiology
• /
• v.34 no.3
• /
• pp.128-130
• /
• 2006

The solid waste of sago industry using cassava was fermented by Aspergillus niger, Aspergillus terreus and Rhizopus stolonifer in solid state fermentation. Cassava waste contained 52 per cent starch and 2.9 per cent protein by dry weight. The amylase activity was maintained at a high level and the highest amylase activity was observed on the $8^{th}$ day in R. stolonifer mediated fermentation. R. stolonifer was more efficient than Aspergillus niger and Aspergillus terreus in bioconverting cassava waste into fungal protein (90.24 mg/g) by saccharifying 70% starch and releasing 44.5% reducing sugars in eight days of solid state fermentation.

• Journal of Applied Biological Chemistry
• /
• v.55 no.3
• /
• pp.149-156
• /
• 2012

The effects of solvent type and concentration, solid/liquid ratio, extraction time and repeated extraction on recovery of keratinase from solid-state fermentation (SSF) of chicken feather by a local Streptomyces sp. NRC 13S were investigated in order to establish the experimental conditions for keratinase yield. Among solvents tested, 0.5% (v/v) glycerol was the best. Box-Behnken design was used to investigate the effect of relevant variables on keratinase recovery. The factors investigated were solid/liquid ratio (1:1.66-1:6.66 g/mL), glycerol concentration (0.5-5% v/v) and repeated extraction (1-5 cycle). The results showed that the maximum recovery of keratinase (6933.3 U/gfs) was obtained using 0.5 (v/v) glycerol as extracting solvent, in a solid/liquid ratio of 1:5 and three extraction cycles.

• Preventive Nutrition and Food Science
• /
• v.1 no.1
• /
• pp.46-52
• /
• 1996

Effective method for the preparation of Dongchimi juice was developed by addition of NaCi, sucrose and bydrolytic enzymes before fermentation and addition on Dongchimi juice during fermentation. The radish was ground and suspended in water(1:1, w/v) with addition of spices(garlic, green onion and ginger) followed by fermentation at $25^{\circ}C$. The addition of 2% NaCi and 0.5~2.0% sucrose resulted in significant increase of solid content and it was also improved by the addition of polysaccharide hydrolyzing enzyme during fermentation. When the fermented juices of pH 5.4 of 4.4 were added by 15% of total weight before(pH 5.4 juice)and during (pH 4.4 juice) fermentation, a significant increase in solid content after 24hrs of fermentation was resulted. The combined method of addition of 2% NaCI, 1.0% sucrode, 0.1% Viscozyme and 10% of fermented juice of pH 5.4 and 4.$ before and during fermentation improved solid content, reducing sugar, color and showed little effect on viscosity. The organoleptic characteristics were also improved by the combined method.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.4
• /
• pp.718-726
• /
• 2010

A selected fungal strain, for production of the raw-starchdigesting enzyme by solid-state fermentation, was improved by two repeated sequential exposures to ${\gamma}$-irradiation of $Co^{60}$, ultraviolet, and four repeated treatments with Nmethyl-N'-nitrosoguanidine. The mutant strain Aspergillus sp. XN15 was chosen after a rigorous screening process, with its production of the raw-starch-digesting enzyme being twice that of usual wild varieties cultured under preoptimized conditions and in an unsupplemented medium. After 17 successive subculturings, the enzyme production of the mutant was stable. Optimal conditions for the production of the enzyme by solid-state fermentation, using wheat bran as the substrate, were accomplished for the mutant Aspergillus sp. XN15. With the optimal fermentation conditions, and a solid medium supplemented with nitrogen sources of 1% urea and 1% $NH_4NO_3$, 2.5 mM $CoSO_4$, 0.05% (v/w) Tween 80, and 1% glucose, the mutant Aspergillus sp. XN15 produced the raw-starch-digesting enzyme in quantities 19.4 times greater than a typical wild variety. Finally, XN15, through simultaneous saccharification and fermentation of a raw rice corn starch slurry, produced a high level of ethanol with $Y_{p/s}$ of 0.47 g/g.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.7
• /
• pp.1257-1265
• /
• 2008

To lower the cost of ethanol distillation of fermentation broths, a high initial glucose concentration is desired. However, an increase in the substrate concentration typically reduces the ethanol yield because of insufficient mass and heat transfer. In addition, different operating temperatures are required to optimize the enzymatic hydrolysis (50$^{\circ}C$) and fermentation (30$^{\circ}C$). Thus, to overcome these incompatible temperatures, saccharification followed by fermentation (SFF) was employed with relatively high solid concentrations (10% to 20%) using a portion loading method. In this study, glucose and ethanol were produced from Solka Floc, which was first digested by enzymes at 50$^{\circ}C$ for 48 h, followed by fermentation. In this process, commercial enzymes were used in combination with a recombinant strain of Zymomonas mobilis (39679:pZB4L). The effects of the substrate concentration (10% to 20%, w/v) and reactor configuration were also investigated. In the first step, the enzyme reaction was achieved using 20 FPU/g cellulose at 50$^{\circ}C$ for 96 h. The fermentation was then performed at 30$^{\circ}C$ for 96 h. The enzymatic digestibility was 50.7%, 38.4%, and 29.4% after 96 h with a baffled Rushton impeller and initial solid concentration of 10%, 15%, and 20% (w/v), respectively, which was significantly higher than that obtained with a baffled marine impeller. The highest ethanol yield of 83.6%, 73.4%, and 21.8%, based on the theoretical amount of glucose, was obtained with a substrate concentration of 10%, 15%, and 20%, respectively, which also corresponded to 80.5%, 68.6%, and 19.1%, based on the theoretical amount of the cell biomass and soluble glucose present after 48 h of SFF.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.5
• /
• pp.794-799
• /
• 1997

The effective fermentation methods of Kimchi juice for utilization of outer layer of Chinese cabbage, an waste of Kimchi industry were studied. The Kimchi juice prepared with brining and grinding the waste of Chinese cabbage and addition of spices was fermented at $25^{\circ}C$. Addition of 5$^{\circ}C$15% fermented Kimchi juice of pH 5.4 at initial stage and pH 4.4 at middle state resulted in a significant increase in fermentation rate and solid content after 12 hours of fermentation. The combined method of enzymatic hydrolysis(0.1% viscozyme) of the brined and ground cabbage and addition of 2.0% NaCl, 1.0% sucrose and 10% fermented juice of pH 5.4 first and 4.4 during fermentation, respectively resulted in more rapid fermentation. The solid concentration was 5 times higher than control at maximum point and acidic and total flavor intensity were also significantly high.

• Food Science and Biotechnology
• /
• v.15 no.5
• /
• pp.814-816
• /
• 2006

Monacolin K (MK) was produced on soybean using Monascus ruber GM011 by a two-stage-fermentation process. The optimal temperature was identified as $28^{\circ}C$. Higher yield was obtained by multiple-level-temperature cultivation than by single-level-temperature cultivation. The highest yield of total MK, 4.810 mg/g dry soybean product, was attained after 30 days of solid-state fermentation. No citrinin could be detected in the fermented soybean.

• Mycobiology
• /
• v.38 no.2
• /
• pp.137-143
• /
• 2010

The production of conidia of entomopathogenic Beauveria bassiana by solid-state fermentation was studied for the development of a biocontrol agent against aphid Myzus persicae. The optimal conditions for conidia production on polished white rice were 40% moisture content, $25^{\circ}C$ culture temperature, 2-day-old seeding culture grown in 3% corn meal, 2% rice bran, 2% corn steep powder medium, initial conidia concentration of $10^7$ conidia/g in the wet rice, 10% inoculum size, and use of a polyethylene bag as a container. The polyethylene bag containing inoculated rice was hand-shaken every 12 hr during fermentation. Using optimal conditions, the maximum conidia production obtained was 4.05 g conidia/100 g dry rice after 14 days of cultivation, a rate 2.83 times higher than conidia yield of pre-optimization.