• 제목/요약/키워드: soldering process

검색결과 145건 처리시간 0.025초

열하중하에 있는 IC 패키지의 점탄성 파괴해석 (Visco-Elastic Fracture Analysis of IC Package under Thermal Loading)

  • 이강용;양지혁
    • 한국정밀공학회지
    • /
    • 제15권1호
    • /
    • pp.43-50
    • /
    • 1998
  • The purpose of the paper is to protect the damage of plastic IC package with searching the cause of the fracture due to the delamination and crack when the encapsulant of plastic IC package is on viscoelastic behavior with the effect of creep on high temperature, The model for analysis is the plastic SOJ package with dimpled diepad in the IR soldering process of surface mounting technology. The risk of delamination with calculating the distribution of viscoelastic thermal stress in the package without the crack in the surface mounting process is checked. The package model with the perfect delamination between chip and diepad is chosen to estimate the resistance against fracture in thermal loading with calculating C (t)-integrals according to the change of the design. The optimum design to depress the delamination and crack is presented.

  • PDF

조립용 로봇의 오프라인 교시를 위한 영상 정보의 이용에 관한 연구 (Utilization of Vision in Off-Line Teaching for assembly robot)

  • 안철기
    • 한국공작기계학회:학술대회논문집
    • /
    • 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
    • /
    • pp.543-548
    • /
    • 2000
  • In this study, an interactive programming method for robot in electronic part assembly task is proposed. Many of industrial robots are still taught and programmed by a teach pendant. The robot is guided by a human operator to the desired application locations. These motions are recorded and are later edited, within the robotic language using in the robot controller, and play back repetitively to perform robot task. This conventional teaching method is time-consuming and somewhat dangerous. In the proposed method, the operator teaches the desired locations on the image acquired through CCD camera mounted on the robot hand. The robotic language program is automatically generated and downloaded to the robot controller. This teaching process is implemented through an off-line programming software. The OLP is developed for an robotic assembly system used in this study. In order to transform the location on image coordinates into robot coordinates, a calibration process is established. The proposed teaching method is implemented and evaluated on an assembly system for soldering electronic parts on a circuit board. A six-axis articulated robot executes assembly task according to the off-line teaching in the system.

  • PDF

3차원 실장을 위한 Non-PR 직접범핑법 (Non-PR direct bumping for 3D wafer stacking)

  • 전지헌;홍성준;이기주;이희열;정재필
    • 대한용접접합학회:학술대회논문집
    • /
    • 대한용접접합학회 2007년 추계학술발표대회 개요집
    • /
    • pp.229-231
    • /
    • 2007
  • Recently, 3D-electronic packaging by TSV is in interest. TSV(Through Silicon Via) is a interconnection hole on Si-wafer filled with conducting metal such as Copper. In this research, chips with TSV are connected by electroplated Sn bump without PR. Then chips with TSV are put together and stacked by the methode of Reflow soldering. The stacking was successfully done and had no noticeable defects. By eliminating PR process, entire process can be reduced and makes it easier to apply on commercial production.

  • PDF

이송 모듈을 사용한 리플로우 오븐의 열유동해석 (Thermal design of reflow oven with PCB-module)

  • 정원중;권현구;조형희
    • 반도체디스플레이기술학회지
    • /
    • 제5권3호
    • /
    • pp.29-32
    • /
    • 2006
  • Because of new requirements related to the employment of SMT(Surface Mounting Technology) manufacturing and the diversity of components on high density PCB(Printed Circuit Boards), Thermal control of the reflow process is required in order to achieve acceptable yields and reliability of SMT assemblies. Accurate control of the temperature distribution during the reflow process is one of the major requirements, especially in lead-free assembly. This study has been performed for reflow process using the commercial CFD(Computational Fluid Dynamics) tool for predicting flow and temperature distributions. Porous plate was installed to prevent leakage flow which was one of the major problem of temperature uniformity in the reflow process. There is a separation region where the flow is turned. Outside wall made of porous plate is to prevent and minimize separation region for acquiring uniform temperature during operation. This paper provided design concept from CFD results of the steady state temperature distribution and flow field inside a reflow oven.

  • PDF

Reflow Profiling The Benefits of Implementing a Ramp-to-Spike Profile

  • AIM
    • 한국마이크로전자및패키징학회:학술대회논문집
    • /
    • 한국마이크로전자및패키징학회 2000년도 Proceedings of 5th International Joint Symposium on Microeletronics and Packaging
    • /
    • pp.17-17
    • /
    • 2000
  • The issue of reflow profiling continues to be a complex topic. The pains often associated with profiling can be reduced greatly if certain guidelines are followed and if there is a strong understanding of the variables that can be encountered during the reflow process. This paper shall discuss the appropriate guidelines and trouble shooting methods for reflow profiling, and in particular shall focus upon the benefits of implementing the linear ramp-to-spike profile. Delta T(T) is defined as the variation of temperature found on an assembly during the reflow process. Too large of a T can result in soldering defects, so to combat T a Ramp-Soak-Spike(RSS) reflow profile often is utilized. However, when using a newer-style reflow oven, the T often is minimized or eliminated, thus, the soak zone of the reflow profile becomes an unnecessary step. Because of this, the implementation of a linear Ramp-To-Spike(RTS) reflow profile should be considered. Benefits such as reduced energy costs, reduced solder defects, increased efficiency, improved wetting, and a simplification of the reflow profile process may be experienced when using the RTS profile. Included in this paper are the suggested process parameters for setting up the RSS and RTS profiles and the chemical and metallurgical reactions that occur at each set point of these profiles. The paper concludes with a discussion and pictures of several profile-related defects. Each of these defects is described, analyzed, and instructions are given for troublshooting these defects.

  • PDF

경주 계림로 14호분 장식보검 금립의 접합방법에 관한 고찰 (Ornamented Dagger Sheath from Gyerim-ro Tomb No.14, Gyeongju: On the Joining Process of Gold Granules)

  • 유혜선
    • 박물관보존과학
    • /
    • 제16권
    • /
    • pp.4-13
    • /
    • 2015
  • 지금까지 한반도에서 출토된 누금세공유물의 접합방법을 살펴보면 금과 은을 합금한 재료를 사용한 금납법으로 접합한 경우가 대부분이다. 경주 보문동합장분 출토 금제태환이식(국보 제90호), 호암미술관 소장 금제세환이식과 금제태환이식(보물 제557호) 그리고 통일신라시대 감은사지 동삼층석탑 출토 금제풍탁(金製風鐸) 등에서 확인되었다. 그러나 경주 계림로 14호묘 출토 장식보검(裝飾寶劍)의 금립 접합방법은 지금까지 확인된 방식과는 다르다는 것을 SEM-EDS 분석으로 알 수 있었다. 계림로 장식보검의 금립은 크기와 형태가 매우 고르고, 표면에 수지상 조직(樹枝狀組織)을 갖고 있다. 순수한 금속에서는 이 수지상 조직이 나타나지 않으며, 합금된 물질의 특징이라고 할 수 있다. 실제로 금립의 조성은 Au 77wt%, Ag 18wt%, Cu 4wt%의 3원계 합금물질이다. 이 성분 특성(합금 금속)으로 인하여 순수한 금의 녹는점인 1064℃ 보다 훨씬 더 낮은 온도인 1000℃ 미만(약 980℃)에서도 금속의 용해가 가능하게 된다. 그러므로 금땜이나 다른 매개물을 전혀 사용하지 않고도 순간적으로 고온을 가하게 되면 금립의 접합이 가능하게 된다. 그리고 SEM 이미지 관찰에서도 땜의 흔적을 전혀 찾아 볼 수 없는 것으로 보아 융접법에 의한 접합이 이루어진 것으로 추정된다.

납땜 플럭스 개발에 관한 연구 (A Study on Developing of Soldering Flux)

  • 이통영
    • 한국화재소방학회논문지
    • /
    • 제14권2호
    • /
    • pp.33-38
    • /
    • 2000
  • 전자산업의 공정에서 PCB기판납땜은 괼수적이며 이에 사용하는 Flux내 용제인 IPA(Iso--propyl alcohol)와 메탄올은 인화성과 폭발성이 강한 물질로 화재위험성이 대단히 높다. 또한 메탄올은 유독성물질로 지정되어 있으며, 환경법상 VOC(Volatile Organic Compound : 휘발성유기화합물)규제물질로 지정되어 있어 대체물질 개발이 절실히 요구된다. 이에 기존 Flux특성을 가지고 있으면서 화재위험성은 없고, 휘발성유기화합물 규제물질에는 해당되지 않는 디클로로프로판(Dichloropropane, DCP)를 주성분으로 하여 Flux 특성에 맞는 안정제 및 첨가제를 적정 조성비로 조합하여 용제를 개발하였다. 그 결과 200ppm의 작업환경허용농도를 470 ppm으로 완화시킬 수 있었으며 납땜불량율은 0.083%에서 0%로, 퍼짐성은 85%에서 87%로, 전연저항은 1.0$\times$$10^{12}$$\Omega$에서 6.9$\times$$10^{12}$/$\Omega$으로 기존 Flux보다 우수하였다. 그러므로 Flux의 안정성은 물론 환경안전측면과 품질, 생산성도 향상이 가능함을 확인하였고, 품질 특성시험 및 제품 신뢰성 시험 결과 만족할 만한 곁과를 얻었다.

  • PDF

칩-섬유 배선을 위한 본딩 기술 (Bonding Technologies for Chip to Textile Interconnection)

  • 강민규;김성동
    • 마이크로전자및패키징학회지
    • /
    • 제27권4호
    • /
    • pp.1-10
    • /
    • 2020
  • 웨어러블 소자를 구현하기 위한 칩-섬유 접합 기술을 중심으로 전자 섬유에 대한 기술 개발 동향을 소개한다. 전자 부품을 섬유에 접합하기 위해서는 먼저 전자 부품에 전원 공급 및 전기적 신호를 주고 받기 위한 회로를 섬유에 구성해야 하며, 회로의 해상도와 밀도에 따라 전도성 실을 이용하는 자수법 또는 전도성 페이스트 등을 이용한 프린트법을 통해 구현할 수 있다. 전자 부품과 섬유를 접합하기 위해서는 솔더링, ACF/NCA, 자수법, 크림핑 등의 방법을 이용하여 영구적으로 접합하거나 후크, 자석, 지퍼 등을 이용하여 탈부착이 가능하도록 접합하는 방법이 있으며, 접합 배선의 밀도 및 용도에 따라서 단독 또는 융합하여 사용한다. 접합 이후에는 방수 등 사용환경에서의 신뢰성을 확보하기 위해 encapsulation 작업을 수행해야 하며, 현재는 PDMS 등의 폴리머를 이용한 방법이 널리 쓰이고 있다.

고온고습시험에 의한 멀티 와이어 PV 모듈의 금속 간 화합물 층의 성장에 관한 연구 (A Study on Growth of Intermetallic Compounds Layer of Photovoltaic Module Interconnected by Multi-wires under Damp-heat Conditions)

  • 문지연;조성현;손형진;전다영;김성현
    • Current Photovoltaic Research
    • /
    • 제8권4호
    • /
    • pp.124-128
    • /
    • 2020
  • Output power of photovoltaic (PV) modules installed outdoors decreases every year due to environmental conditions such as temperature, humidity, and ultraviolet irradiations. In order to promote the installation of PV modules, the reliability must be guaranteed. One of the important factors affecting reliability is intermetallic compounds (IMC) layer formed in ribbon solder joint. For this reason, various studies on soldering properties between the ribbon and cell have been performed to solve the reliability deterioration caused by excessive growth of the IMC layer. However, the IMC layer of the PV module interconnected by multi-wires has been studied less than using the ribbon. It is necessary to study soldering characteristics of the multi-wire module for improvement of its reliability. In this study, we analyzed the growth of IMC layer of the PV module with multi-wire and the degradation of output power through damp-heat test. The fabricated modules were exposed to damp-heat conditions (85 ºC and 85 % relative humidity) for 1000 hours and the output powers of the modules before and after the damp-heat test were measured. Then, the process of dissolving ethylene vinyl acetate (EVA) as an encapsulant of the modules was performed to observe the IMC layer. The growth of IMC layer was evaluated using OM and FE-SEM for cross-sectional analysis and EDS for elemental mapping. Based on these results, we investigated the correlation between the IMC layer and output power of modules.

실리콘 이종접합 태양전지의 버스바 전극 두께와 접합강도의 상관관계 (A Study on Correlation between Busbar Electrodes of Heterojunction Technology Solar Cells and the Peel Strength)

  • 전다영;문지연;박고등;오트곤게렐 줄만다크;남혜령;권오련;임현수;김성현
    • Current Photovoltaic Research
    • /
    • 제11권2호
    • /
    • pp.44-48
    • /
    • 2023
  • In heterojunction technology (HJT) solar cells, low-temperature curing paste is used because the passivation layer deteriorates at high temperatures of 200℃ or higher. However, manufacturing HJT photovoltaic (PV) modules is challenging due to the weak peel strength between busbar electrodes and cells after soldering process. For this issue, the electrode thicknesses of the busbars of the HJT solar cell were analyzed, and the peel strengths between electrodes and wires were measured after soldering using an infrared (IR) lamp. As a result, the electrodes printed by the screen printing method had a difference in thickness due to screen mask. Also, as the thickness of the electrode increased, the peel strength of the wire increased.