• 제목/요약/키워드: solar cells

검색결과 2,364건 처리시간 0.028초

농업용 전기운반차의 주행성능 향상을 위한 구조해석에 관한 연구 (A Study on Structural Analysis for Improving Driving Performance of Agricultural Electric Car)

  • 조재현;이상식
    • 한국정보전자통신기술학회논문지
    • /
    • 제13권6호
    • /
    • pp.556-561
    • /
    • 2020
  • 현대 사회의 농업 인구의 고령화 및 감소로 농업 환경 개선이 필요한 실정이고 대표적인 문제 중 하나이다. 그리고 대부분의 작업체계에서 항상 운반 작업이 필요하기 때문에 운반 작업에 사용되는 시간과 노동력의 비율이 매우 높다. 이에 따라 많은 종류의 운반차들이 개발되고 판매되고 있으며, 초기에는 대부분 화석연료를 사용하는 동력운반차가 주종을 이루고 있다. 그러나 최근에는 지구온난화와 기후변화협약 등 국제 환경규제의 강화 및 화석연료의 고갈로 인한 수소, 연료전지, 태양광, 바이오 등 차세대 친환경에너지를 주목하고 있다. 그래서 본 연구에서는 화석연료를 대체하는 친환경적이며 누구나 쉽게 조작이 가능하고 안전한 농업용 전기운반차를 개발하는 것을 최종목표로 한다. 농업용 전기운반차의 광범위한 차속 조절 및 안정성 확보에 초점을 두고 설계하였으며, 성능 및 디자인을 고려하여 프레임, 주행부, 조향부, 컨트롤러 시스템 등으로 구성되어 각 부분별 검토하였다. 본 연구의 농업용 전기운반차가 젊은 인력이 부족한 농경사회에서 고령노동자나 여성들이 쉽고 편하게 작업을 할 수 있고 높은 효율성을 통해서 농경사회에 도움이 될 수 있을 것이다.

신경회로망을 적용한 직류배전시스템의 AFE 정류기 제어에 관한 연구 (Active Front End Rectifier Control of DC Distribution System Using Neural Network)

  • 김성완;전현민;김종수
    • 해양환경안전학회지
    • /
    • 제27권7호
    • /
    • pp.1124-1128
    • /
    • 2021
  • 선박으로부터 발생하는 배출가스에 대한 규제가 강화되고 이를 해결하기위한 대안으로 전기추진시스템의적용이 대형상선에서부터 중·소형선박에 이르기까지 그 사용이 증가되고있다. 전기추진시스템의 효율 향상을 위한 방법으로 발전원의 개선, 배터리·연료전지·태양광 등의 친환경 발전원의 시스템 연계 및 정류기, 전력변환장치, 추진전동기의 개발과 제어방식의 연구를 들 수 있다. 그 중 정류방식에 있어 상천이변압기과 다이오드를 이용하는 방식이 널리 사용되었으나, 직류배전을 이용한 친환경발전원의 계통 연계, 가변속 발전원의 사용, 중·소형 전기추진시스템의 적용을 통해 전력용 반도체 소자를 이용한 AFE정류기에 대한 수요가 증대되고 있다. 이러한 AFE 정류기를 제어하는 방식에 있어 기존의 비례적분제어기가 아닌 신경회로망을 이용한 방식을 본 연구에서는 제안하였다. 기존의 제어기 데이터를 활용하여 Matlab/Simulink를 통해 학습한 신경회로망제어기를 설계하고 PSIM을 통해 설계된 정류시스템에 신경회로망 제어기를 적용하여 부하변동에 따른 직류출력단의 파형과 역률 개선의 유효성을 확인하였다. 이는 공간이 협소한 중소형 친환경 선박의 정류시스템으로써 적용이 가능하다.

투명 근적외선 흡수 염료 및 응용 분야 (Transparent Near-infrared Absorbing Dyes and Applications)

  • 정효철;정지은;이상호;김진철;박영일
    • 공업화학
    • /
    • 제34권3호
    • /
    • pp.207-212
    • /
    • 2023
  • 근적외선 흡수 염료는 전통적으로 정보 기록 및 정보 표시 분야에 사용되었을 뿐만 아니라 최근 광학 필터, 바이오, 에너지 저장 및 변환, 코팅 첨가제 등 다양한 응용 분야에 적용되고 있다. 핸드폰이나 디지털 카메라에 사용되는 이미지 센서는 근적외선 영역에서도 감도를 나타내기 때문에 보다 선명한 이미지를 구현하기 위해 근적외선 광학필터가 필수적이다. 에너지 저장 및 변환이 중요해짐에 따라 투명 태양 전지 분야에서는 근적외선 영역까지 흡수 영역을 확장할 수 있도록 다양한 근적외선 흡수 소재가 개발되고 있으며, 이를 이용해 소자 효율을 향상시키는 연구가 진행되고 있다. 미래 모빌리티 기술로 많은 관심을 받고 있는 자기치유 코팅 시스템에 광-열 효과를 갖는 근적외선 흡수 염료가 도입되어 보다 효율적인 자기치유 성능을 구현하는 연구들도 보고되고 있다. 본 총설에서는 대표적인 근적외선 흡수 염료들의 화학 구조들을 소개하고, 근적외선 흡수 염료들을 기반으로 한 최신 응용 연구 동향에 대해 다뤄보고자 한다.

열화학기상증착법을 이용한 CsPbBr3 박막 성장 및 특성 연구 (A Growth and Characterization of CsPbBr3 Thin Film Grown by Thermal Chemical Vapor Deposition)

  • 김가은;김민진;류혜수;이상현
    • 마이크로전자및패키징학회지
    • /
    • 제30권2호
    • /
    • pp.71-75
    • /
    • 2023
  • 본 연구에서는 열화학기상증착법을 이용한 세슘계 무기 페로브스카이트의 성장기판에 따른 결정 구조의 변화 및 광학적 특성을 비교 분석하였다. 무기 페로브스카이트 결정은 CsBr과 PbBr2를 전구체로 사용하여 SiO2/Si와 c-Al2O3 기판 위에 동일한 조건으로 CsPbBr3를 성장하였다. 비정질 구조를 가진 SiO2 표면에서는 Cs4PbBr6-CsPbBr3 혼합상의 결정 입자가 성장하였으며, 단결정 구조인 c-Al2O3 기판에서는 CsPbBr3 (100) 결정 면방향이 우세한 단일상의 박막이 형성되었다. 광학적 분석 결과 CsPbBr3는 약 91 meV의 반치폭을 갖고 약 534 nm 중심의 발광특성을 보였으며, Cs4PbBr6-CsPbBr3 혼합구조에서는 청색 변이에 의해 523 nm의 발광 및 6.88 ns의 빠른 광 소결시간을 확인하였다. 열화학기상증착법을 이용한 페로브스카이트의 결정구조의 제어 및 광특성의 변화는 디스플레이, 태양 전지, 광센서 등 다양한 광전 소자에 적용할 수 있을 것으로 기대된다.

양자점 디스플레이 제작을 위한 양자점 패터닝 기술발전 동향 (Recent Developments in Quantum Dot Patterning Technology for Quantum Dot Display)

  • 진영준;정경준;정재한
    • 한국분말재료학회지
    • /
    • 제31권2호
    • /
    • pp.169-179
    • /
    • 2024
  • 양자점 패터닝 기술은 최근 QLED, 센서, laser, 태양전지, 양자컴퓨터 등을 포함한 광전자 응용분야에서 많은 수요가 예상되고 있다. 최근 양자점 패터닝을 위한 다양한 기술이 등장했지만 여전히 실제 산업에 적용에는 힘든 실정이다. 1~100 ㎛에 걸친 다양한 패턴 크기를 구현할 수 있는 전사프린팅은 대면적화가 어렵고 공정과정 중 발생할 수 있는 양자점 필름의 불완전한 박리 문제로 인한 패터닝 수율 문제가 보고 되고 있다. 기존 반도체 공정을 활용할 수 있는 포토리소그래피를 활용한 양자점 패터닝은 초고해상도로 픽셀을 패터닝 할 수 있다는 장점이 있지만, 포토레지스트를 제거하기 위해 쓰이는 용매에 의해 양자점 패턴 자체가 손상될 수도 있고 오염되어 광 효율이 낮아질 수 있다는 우려가 있다. 포토레지스트를 사용하지 않고 양자점의 용해도를 활용한 직접 광경화 공정이 주목받았지만, 패터닝 과정 중 생기는 결함과 비방사성 재결합으로 인해 양자점의 발광 효율이 떨어진다는 단점이 있어 표면 처리 등의 연구가 더욱 요구된다. 잉크젯 프린팅은 대면적화가 쉽고 상대적으로 경제적이라는 장점이 있으나 패턴의 불균일성과 낮은 해상도의 단점이 있다. 다양한 양자점 패터닝 방법 기술개발을 통해 QLED 소자에만 국한되는 것이 아니라 태양전지, 양자 통신, 양자 컴퓨터 등에도 적용이 기대된다.

Highly Doped Nano-crystal Embedded Polymorphous Silicon Thin Film Deposited by Using Neutral Beam Assisted CVD at Room Temperature

  • 장진녕;이동혁;소현욱;홍문표
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
    • /
    • pp.154-155
    • /
    • 2012
  • The promise of nano-crystalites (nc) as a technological material, for applications including display backplane, and solar cells, may ultimately depend on tailoring their behavior through doping and crystallinity. Impurities can strongly modify electronic and optical properties of bulk and nc semiconductors. Highly doped dopant also effect structural properties (both grain size, crystal fraction) of nc-Si thin film. As discussed in several literatures, P atoms or radicals have the tendency to reside on the surface of nc. The P-radical segregation on the nano-grain surfaces that called self-purification may reduce the possibility of new nucleation because of the five-coordination of P. In addition, the P doping levels of ${\sim}2{\times}10^{21}\;at/cm^3$ is the solubility limitation of P in Si; the solubility of nc thin film should be smaller. Therefore, the non-activated P tends to segregate on the grain boundaries and the surface of nc. These mechanisms could prevent new nucleation on the existing grain surface. Therefore, most researches shown that highly doped nc-thin film by using conventional PECVD deposition system tended to have low crystallinity, where the formation energy of nucleation should be higher than the nc surface in the intrinsic materials. If the deposition technology that can make highly doped and simultaneously highly crystallized nc at low temperature, it can lead processes of next generation flexible devices. Recently, we are developing a novel CVD technology with a neutral particle beam (NPB) source, named as neutral beam assisted CVD (NBaCVD), which controls the energy of incident neutral particles in the range of 1~300eV in order to enhance the atomic activation and crystalline of thin films at low temperatures. During the formation of the nc-/pm-Si thin films by the NBaCVD with various process conditions, NPB energy directly controlled by the reflector bias and effectively increased crystal fraction (~80%) by uniformly distributed nc grains with 3~10 nm size. In the case of phosphorous doped Si thin films, the doping efficiency also increased as increasing the reflector bias (i.e. increasing NPB energy). At 330V of reflector bias, activation energy of the doped nc-Si thin film reduced as low as 0.001 eV. This means dopants are fully occupied as substitutional site, even though the Si thin film has nano-sized grain structure. And activated dopant concentration is recorded as high as up to 1020 #/$cm^3$ at very low process temperature (< $80^{\circ}C$) process without any post annealing. Theoretical solubility for the higher dopant concentration in Si thin film for order of 1020 #/$cm^3$ can be done only high temperature process or post annealing over $650^{\circ}C$. In general, as decreasing the grain size, the dopant binding energy increases as ratio of 1 of diameter of grain and the dopant hardly be activated. The highly doped nc-Si thin film by low-temperature NBaCVD process had smaller average grain size under 10 nm (measured by GIWAXS, GISAXS and TEM analysis), but achieved very higher activation of phosphorous dopant; NB energy sufficiently transports its energy to doping and crystallization even though without supplying additional thermal energy. TEM image shows that incubation layer does not formed between nc-Si film and SiO2 under later and highly crystallized nc-Si film is constructed with uniformly distributed nano-grains in polymorphous tissues. The nucleation should be start at the first layer on the SiO2 later, but it hardly growth to be cone-shaped micro-size grains. The nc-grain evenly embedded pm-Si thin film can be formatted by competition of the nucleation and the crystal growing, which depend on the NPB energies. In the evaluation of the light soaking degradation of photoconductivity, while conventional intrinsic and n-type doped a-Si thin films appeared typical degradation of photoconductivity, all of the nc-Si thin films processed by the NBaCVD show only a few % of degradation of it. From FTIR and RAMAN spectra, the energetic hydrogen NB atoms passivate nano-grain boundaries during the NBaCVD process because of the high diffusivity and chemical potential of hydrogen atoms.

  • PDF

연성 플라스틱 기판위에 스프레이 코팅방법으로 제조한 유·무기 보호막의 특성 (Properties of Organic-Inorganic Protective Films on Flexible Plastic Substrates by Spray Coating Method)

  • 이상희;장호정
    • 마이크로전자및패키징학회지
    • /
    • 제24권4호
    • /
    • pp.79-84
    • /
    • 2017
  • 태양전지와 같은 광전소자의 특성 및 신뢰성 유지하기 위해서는 수분과 산소 등으로 부터 소자 내부가 보호되어야 한다. 본 연구는 여러 연성(flexible) 플라스틱 기판위에 유 무기 복합 보호막을 스프레이코팅 방법으로 형성하여 공정조건(노즐 위치, 박막 두께, 기판 구성)에 따른 소자의 보호특성을 연구하였다. 사용된 복합 보호막 재료로서 PVA (polyvinyl alcohol)와 SA(sodium alginate) 혼합 유기 물질(P.S)에 $Al_2O_3$($P.S+Al_2O_3$)과 $SiO_2$($P.S+SiO_2$) 나노 분말을 혼합하여 유 무기 복합 보호막 용액을 합성하였다. 플라스틱 기판 위에 코팅한 보호막의 두께가 $5{\mu}m$에서 91%의 투과율을 나타내었으며 $78{\mu}m$에서 $178{\mu}m$로 두께가 증가할 경우 광 투과율은 81.6%에서 73.6%으로 감소하였다. 또한 합성한 $P.S+Al_2O_3$ 복합재료를 사용하여 PEN(polyethylene naphthalate), PC(polycarbonate) 단일 플라스틱 기판과 Acrylate film과 PC 이중막(Acrylate film/PC double layer) 구조와 $Al_2O_3$ 무기박막과 PEN 이중막($Al_2O_3$ film/PEN double layer) 구조의 기판 위에 $P.S+Al_2O_3$ 용액을 사용하여 수분투과도(water vapor transmission rate, WVTR)와 표면형상 등을 측정하여 최적의 보호막 구조를 확인하였다. 즉, $Al_2O_3$ film/PEN 이중막 기판위에 형성한 보호막의 수분투과 값은 $0.004gm/m^2-day$로 가장 우수한 내 투습 특성을 나타내었다.

봉지막이 박형 실리콘 칩의 파괴에 미치는 영향에 대한 수치해석 연구 (Effects of Encapsulation Layer on Center Crack and Fracture of Thin Silicon Chip using Numerical Analysis)

  • 좌성훈;장영문;이행수
    • 마이크로전자및패키징학회지
    • /
    • 제25권1호
    • /
    • pp.1-10
    • /
    • 2018
  • 최근 플렉서블 OLED, 플렉서블 반도체, 플렉서블 태양전지와 같은 유연전자소자의 개발이 각광을 받고 있다. 유연소자에 밀봉 혹은 봉지(encapsulation) 기술이 매우 필요하며, 봉지 기술은 유연소자의 응력을 완화시키거나, 산소나 습기에 노출되는 것을 방지하기 위해 적용된다. 본 연구는 봉지막(encapsulation layer)이 반도체 칩의 내구성에 미치는 영향을 고찰하였다. 특히 다층 구조 패키지의 칩의 파괴성능에 미치는 영향을 칩의 center crack에 대한 파괴해석을 통하여 살펴보았다. 다층구조 패키지는 폭이 넓어 칩 위로만 봉지막이 덮고있는 "wide chip"과 칩의 폭이 좁아 봉지막이 칩과 기판을 모두 감싸고 있는 "narrow chip"의 모델로 구분하였다. Wide chip모델의 경우 작용하는 하중조건에 상관없이 봉지막의 두께가 두꺼울수록, 강성이 커질수록 칩의 파괴성능은 향상된다. 그러나 narrow chip모델에 인장이 작용할 때 봉지막의 두께가 두껍고 강성이 커질수록 파괴성능은 악화되는데 이는 외부하중이 바로 칩에 작용하지 않고 봉지막을 통하여 전달되기에 봉지막이 강하면 강한 외력이 칩내의 균열에 작용하기 때문이다. Narrow chip모델에 굽힘이 작용할 경우는 봉지막의 강성과 두께에 따라 균열에 미치는 영향이 달라지는데 봉지막의 두께가 작을 때는 봉지막이 없을 때보다 파괴성능이 나쁘지만 강성과 두께의 증가하면neutral axis가 점점 상승하여 균열이 있는 칩이 neutral axis에 가까워지게 되므로 균열에 작용하는 하중의 크기가 급격히 줄어들게 되어 파괴성능은 향상된다. 본 연구는 봉지막이 있는 다층 패키지 구조에 다양한 형태의 하중이 작용할 때 패키지의 파괴성능을 향상시키기 위한 봉지막의 설계가이드로 활용될 수 있다.

Ecosysteme de I′Etang de Berre (Mediterranee nord-occidentale) : Caracteres Generales Physiques, Chimiques et Biologiques

  • Kim, Ki-Tai
    • 환경생물
    • /
    • 제22권2호
    • /
    • pp.247-258
    • /
    • 2004
  • Climatological, hydrological and planktonical research studies, measurements of primary production and photosynthetic efficiency from December 1976 to December 1978 have been carried out in two brackish lakes: Lake Etang de Berre and Lake Etang de Vaine located in the French Mediterranean coast, in the region of Carry-le-Rouet located on the north-west Mediterranean near Marseilles, and in fresh water inflows from 4 Rivers (Touloubre, Durance, Arc, Durancole) to Lake Etang de Berre. Physico-chemical parameters were measured for this study: water temperature, salinity, density, pH, alcalinity, dissolved oxygen (% saturation), phosphate, nitrate, nitrite, silicate etc. Diverse biological parameters were also studied: photosynthetic pigments, phaeopigments, specific composition and biomass of phytoplankton, primary pelagic production etc. Climatical factors were studied: air-temperature, solar-radiation, evaporation, direction (including strength) of winds, precipitation and freshwater volume of the four rivers. The changes in Lake ‘Etang de Berre’ ecosystem depend on the quality of the water in the Durance River, and on the effects of seawater near the entrance of the Caronte Canal. The water quality of the lake varies horizontally and vertically as a result of atmospheric phenomena, maritime currents and tides. The distribution of water temperatures is generally heterogeneous. Southeasterly winds and the Northeasterly Mistral wind are important in the origins of circulated and mixed water masses. These winds are both frequent and strong. They have, as a result, a great effect on the water environment of Lake Etang de Berre. In theory, the annual precipitation in this region is well over eight times the water mass of the lake. The water of the Durance River flows into Lake Etang de Berre through the EDF Canal, amounting to 90% of the precipitation. However, reduction of rainfall in dry seasons has a serious effect on the hydrological characteristics of the lake. The temperature in the winter is partially caused by the low temperature of fresh water, particularly that of the Durance River. The hydrological season of fresh and brackish water is about one month ahead of the hydrological season of sea water in its vicinity. The salinity of Lake Etang de Berre runs approximately 3$\textperthousand$, except at lower levels and near the entrance to the Caronte Canal. However, when the volume of the Durance River water is reduced in the summer and fall, the salinity rises to 15$\textperthousand$. In the lake, the ratio of fresh water to sea water is six to one (6:1). The large quantities of seston conveyed by rivers, particularly the Durance diversion, strongly reduce the transparency in the brackish waters. Although the amount of sunshine is also notable, transparency is slight because of the large amount of seston, carried chiefly by Tripton in the fresh water of the Durance River. Therefore, photosynthesis generally occurs only in the surface layer. The transparency progressively increases from freshwater to open seawater, as mineral particles sink to the bottom (about 1.7kg $m^{-2}a^{-1}$ on the average in brackish lakes). The concentration of dissolved oxygen and the rate of oxygen saturation in seawater (Carry-le-Rouet) ranged from 5.0 to 6.0 $m\ell$ㆍ.$1^{-1}$, and from 95 to 105%, respectively. The amount of dissolved oxygen in Etang de Berre oscillated between 2.9 and 268.3%. The monographs of phosphate, nitrate, nitrite and silicate were published as a part of a study on the ecology of phytoplankton in these environments. Horizontal and vertical distributions of these nutriments were studied in detail. The recent diversion of the Durance River into Lake Etang de Berre has effected a fundamental change in this formerly marine environment, which has had a great impact in its plankton populations. A total of 182 taxa were identified, including 111 Bacillariophyceae, 44 Chlorophyceae, and 15 Cyanophyceae. The most abundant species are small freshwater algae, mainly Chlorophyceae. The average density is about $10^{8}$ cells $1^{-1}$ in Lake Etang de Berre, and about double that amount in Lake Etang de Vaine. Differences in phytoplankton abundance and composition at the various stations or at various depths are slight. Cell biovolume V (equivalent to true biomass), plasma volume VP (‘useful’ biomass) and, simultaneously. the cell surface area S and S/V ratio through the measurement of cell dimensions were computed as the parameters of phytoplankton productivity and metabolism. Pigment concentrations are generally very high on account of phytoplankton blooms by Cyanophyceae, Chlorophyceae and Cryptophyceae. On the other hand, in freshwaters and marine waters, pigment concentrations are comparatively low and stable, showing slight annual variation. The variations of ATP concentration were closely related to those of chlorophyll a and phytoplankton blooms only in marine waters. The carbon uptake rates ranged between 38 and 1091 mg$Cm^{-2}d^{-1}$, with an average surface value of 256 mg; water-column carbon-uptake rates ranged between 240 and 2310 mg$Cm^{-2}d^{-1}$, with an average of 810, representing 290 mg$Cm^{-2}$, per year 45 000 tons per year of photosynthetized carbon for the whole lake. Gross photosynthetic production measured by the method of Ryther was studied over a 2-year period. The values obtained from marine water(Carry-le-Rouet) ranged from 23 to 2 337 mg$Cm^{-2}d^{-1}$, with a weighted average of 319, representing about 110 gCm$^{-2}$ per year. The values in brakish water (Etang de Berre) ranged from 14 to 1778 mg$Cm^{-2}d^{-1}$, with a weighted average of 682, representing 250 mg$Cm^{-2}$ per year and 38 400 tons per year of photosynthesized carbon for the whole lake.

공간정보와 생육모의에 의한 남한 벼 품종의 북한 서부지대 적응성 예측 (Using Spatial Data and Crop Growth Modeling to Predict Performance of South Korean Rice Varieties Grown in Western Coastal Plains in North Korea)

  • 김영호;김희동;한상욱;최재연;구자민;정유란;김재영;윤진일
    • 한국농림기상학회지
    • /
    • 제4권4호
    • /
    • pp.224-236
    • /
    • 2002
  • 남한 벼 품종의 북한서부평야지 재배적응성 예측을 위하여 496개 단위 재배구역 각각에 대하여 30년간의 생육모의를 실시하였다. 5km $\times$ 5km로 구획된 1,044개 재배구역중 벼논 재배구역은 위성영상자료를 분석하여 추출하였다. 일최고ㆍ최저기온, 강우량, 강우일수, 일사량은 1981년부터 2000년 동안 남북한의 기상관측소의 측정간을 이용하여 1 km$\times$ 1 km 해상도로 작성하였고, 최소재배단위(CZU)의 벼논 픽셀에 해당하는 기후값만을 발췌하여 그들의 평균값을 각 CZU의 대표값으로 하였으며, 각 재배구역별 월평균값으로부터 30년간의 일기상 자료를 무작위로 생성하였다. 11개 주요 남한 벼품종에 해당하는 CERES-rice 모형에 필요한 생장 및 발육관련모수는 농업관련 국가기관에서 장기간동안 수행하여 축적된 조사자료로부터 추정하였다. 남한 주요 품종의 유전적 특성을 갖도록 모수가 조정된 생육모형 CERES-rice를 북한 서부평야지 496개 벼 재배단위별 무작위로 생성된 30년간의 일기상 자료를 이용하여 이앙기(적식, 만식), 관개(천수답, 수리안전답), 작부방식(일모작, 이모작) 등 3요인을 2수준으로 두어 품종별 총 8개씩의 처리로 년도별 기상변이에 따른 생육 및 수량 등을 모의하였다. 각 품종에 대하여 같은 모형을 남한의 3개 작물시험장 실제 기상자료에 근거한 생육모의를 수행함으로써 북한지방 모의결과의 상대평가를 위한 기준자료로 삼았다. 생육모의를 통한 분석결과 남한의 중생종 벼 품종들 가운데 수원에서의 출수기가 8월 15일 이전인 것들이 북한서부평야지에서 적응성이 높을 것으로 판단된다. 이 결과는 앞으로 있을 남ㆍ북한 농업기술교류시 남한 벼 품종의 북한 곡창지대인 서부평야지 적응성 판단의 중요한 기초자료가 될 것이다.