• Journal of the Korean Geotechnical Society
• /
• v.18 no.4
• /
• pp.309-317
• /
• 2002

The mechanical characteristics of Light-Weighted Foam Soil(LWFS) are investigated in this research. LWFS is composed of the dredged soil from offshore, cement and foam to reduce the unit-weight and increase compressive strength. For this purpose, the unconfined compression tests and triaxial compression tests are carried out on the prepared specimens of LWFS with various conditions such as initial water contents, cement contents, curing conditions and confining stresses. The test results of LWFS indicated that the stress-strain relationship and the compressive strength are strongly influenced by the cement contents rather than the intial water contents of the dredged soils. On the other hand, the stress-strain relationship from triaxial compression test has shown strain-softening behavior regardless of curing conditions. The stress-strain behavior for the various confining stress exhibited remarkable change at the boundary where the confining stress approached to the unconfined compression strength of LWFS. In order to obtain the ground improvement of the compressive strength above 200kPa, the required LWFS mixing ratio is found to be 100%~160% of the initial water contents of dredged soil and 6.6% of cement contents.

• Smart Structures and Systems
• /
• v.34 no.1
• /
• pp.33-40
• /
• 2024

We aimed to assess the evolution of small-strain stiffness and relative density in non-compacted embankment layers. We developed embedded type in-situ soil stiffness measurement devices for monitoring small-strain stiffness occurring after filling at a test site and conducted comprehensive laboratory compaction tests using an oedometer cell with a bender element. However, direct comparison is extremely difficult because the shear wave velocity measured in the field and laboratory depend on depth and effective stress, respectively. Therefore, we propose a method for establishing a relationship between effective stress and depth using a compressibility model. In this study, the shear wave velocity measured in the field was compared to the estimated shear wave velocity-depth profiles for completely dry and saturated conditions with different relative densities. The relative density under saturated soil conditions may vary between 50% and 90% and tends to be closer to 95%. Under dry soil conditions, the relative density of the embankment can vary from 30% to 70% and tends to approach 76%. For model validation, the relative density estimated from shear wave velocity-depth profiles was compared to that estimated from DCPI data. In other words, the results analyzed in the context of an effective stress-depth model enable the prediction of engineering properties such as the small-strain stiffness and relative density of embankment layers. This study demonstrates that physics-based data analyses successfully capture the relative density of non-compacted embankment layers.

• Advances in concrete construction
• /
• v.9 no.3
• /
• pp.327-335
• /
• 2020

Concrete pipes are considered important structures playing integral role in spread of cities besides transportation of gas as well as oil for far distances. Further, concrete structures under seismic load, show behaviors which require to be investigated and improved. Therefore, present research concerns dynamic stress and strain alongside deflection assessment of a concrete pipe carrying water-based nanofluid subjected to seismic loads. This pipe placed in soil is modeled through spring as well as damper. Navier-Stokes equation is utilized in order to gain force created via fluid and, moreover, mixture rule is applied to regard the influences related to nanoparticles. So as to model the structure mathematically, higher order refined shear deformation theory is exercised and with respect to energy method, the motion equations are obtained eventually. The obtained motion equations will be solved with Galerkin and Newmark procedures and consequently, the concrete pipe's dynamic stress, strain as well as deflection can be evaluated. Further, various parameters containing volume percent of nanoparticles, internal fluid, soil foundation, damping and length to diameter proportion of the pipe and their influences upon dynamic stress and strain besides displacement will be analyzed. According to conclusions, increase in volume percent of nanoparticles leads to decrease in dynamic stress, strain as well as displacement of structure.

• Korean Journal of Veterinary Research
• /
• v.33 no.1
• /
• pp.53-60
• /
• 1993

Anaerobic bacteria are suggested to be potential source for new antibiotics. In order to search for antibiotics from domestic origin, we collected 800 soil samples across Korean locations and could isolate as many as 989 anaerobic strains. Among them 10, strains were found to have good producing capacity of antibiotics. An anaerobe was finally selected due to secreting antibiotics having high antimicrobial activity towards multiple resistant microorganism(E coli JM 83) transformed by genetic engineering technique. Its morphological, physiological and biochemical charateristics were investigated, together with antimicrobial spectrum therefrom. On antimicrobial spectrum study, substance secreted from this strain, had no activities to fungus and yeast. The selected strain showed G(+) and coccal shape, on Gram, staining and electron scanning microscopy, respectively. Biochemically this strain utilized glucose, fructose lactose, sucrose, but did not arabinose, cellulose, rhamnose, sorbitol, trehalose, mannitol. Catalase test showed negative property. Optimal growth temperature was $37^{\circ}C$. The results obtained above suggest this strain Streptococcus faecium subspp. and we named it Streptococcus sp. An-21-1.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.6
• /
• pp.913-918
• /
• 2007

A Gram-positive, aerobic, rod-shaped, nonmotile, endospore-forming bacterium, designated Gsoil $349^T$, was isolated from soil of a ginseng field and characterized using a polyphasic approach. Comparative analysis of 16S rRNA gene sequences revealed that the strain Gsoil $349^T$ belongs to the family Paenibacillaceae, and the sequence showed closest similarity with Cohnella thermotolerans DSM $17683^T$ (94.1%) and Cohnella hongkongensis DSM $17642^T$ (93.6%). The strain showed less than 91.3% 16S rRNA gene sequence similarity with Paenibacillus species. In addition, the presence of MK-7 as the major menaquinone and $anteiso-C_{15:0},\;iso-C_{16:0},\;and\;C_{16:0}$ as major fatty acids suggested its affiliation to the genus Cohnella. The G+C content of the genomic DNA was 53.4 mol%. On the basis of its phenotypic characteristics and phylogenetic distinctiveness, strain Gsoil $349^T$ should be treated as a novel species within the genus Cohnella for which the name Cohnella panacarvi sp. nov. is proposed. The type strain is Gsoil $349^T\;(=KCTC\;13060^T=\;DSM\;18696^T)$.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.823-830
• /
• 2004

Consolidation tests under various deformation modes were performed to investigate the effect of deformation modes on the coefficient of consolidation in the normally consolidated clay in remolded and undisturbed clay. The degree of soil anisotropy was evaluated using cross-anisotropic elasticity theory suggested by Graham et al.(1983). Experimental results showed that the vertical compressibility was larger than the horizontal compressibility by $12{\sim}21%$ for the remolded clay and by $23{\sim}60%$ for the undisturbed clay, respectively. The results of a series of consolidation tests under the specific deformation modes showed that the coefficient of consolidation under 1 dimensional vertical strain condition was larger than that under 3 dimensional strain condition due to different deformation mode. Furthermore, the coefficient of consolidation under 1 dimensional vertical strain condition was larger than that under 1 dimensional horizontal strain condition by $40{\sim}60%$ in undisturbed clay, which clearly emphasized the significant effect of soil anisotropy on the rate of consolidation. Consequently, it can be concluded that the anisotropic deformation modes of soils, especially naturally deposited clays, should be taken into account for more accurate evaluation of the coefficient of consolidation.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.196-203
• /
• 2008

Durability of geosynthetics for soil reinforcement is accounted for creep and creep rupture, installation damage and weathering, chemical and biological degradation. Among these, the long-term creep properties have been considered as the most important factors which are directly related to the failure of geosynthetic-reinforced soil(GRS). However, the creep test methods and strain limits are too various to compare the test results with each other. The most widely used test methods are conventional creep test, time-temperature superposition and stepped isothermal method as accelerated creep tests. Recently developed design guidelines recommend that creep-rupture curve be used to determine the creep reduction factor($RF_{CR}$) which is a conservative approach. In this study, the different creep test methods were compared and the creep reduction factors were estimated at different creep strain limits of 10% of total creep strain and creep rupture. In order to minimize the impact of creep strain to the GRS structures, the various creep reduction factors using different creep test methods should be investigated and then the most appropriated one should be selected for incorporating into the design.

• Geomechanics and Engineering
• /
• v.19 no.1
• /
• pp.79-91
• /
• 2019

Renewed interest in the long-term pile foundations has been driven by the increase in offshore wind turbine installation to generate renewable energy. A monopile subjected to repetitive loads experiences an evolution of displacements, pile rotation, and stress redistribution along the embedded portion of the pile. However, it is not fully understood how the embedded pile interacts with the surrounding soil elements based on different pile geometries. This study investigates the long-term soil response around offshore monopiles using finite element method. The semi-empirical numerical approach is adopted to account for the fundamental features of volumetric strain (terminal void ratio) and shear strain (shakedown and ratcheting), the strain accumulation rate, and stress obliquity. The model is tested with different strain boundary conditions and stress obliquity by relaxing four model parameters. The parametric study includes pile diameter, embedded length, and moment arm distance from the surface. Numerical results indicate that different pile geometries produce a distinct evolution of lateral displacement and stress. In particular, the repetitive lateral load increases the global lateral load resistance. Further analysis provides insight into the propagation of the shear localization from the pile tip to the ground surface.

• The Korean Journal of Mycology
• /
• v.47 no.1
• /
• pp.29-34
• /
• 2019

A fungal isolate designated 17E029 was isolated from a soil sample in Jeju, Korea. The strain was similar to other Allantophomopsiella species in its morphological characteristics such as grey mycelia, conidiophore, and conidia sizes. The isolate produced aerial mycelia, which appeared grey on the reverse side of the media surfaces and turned black on the front side of the colonies. The conidiophores emanating from the hyphae were hyaline, grey, aseptate, branched, and $6.7{\sim}9.2{\times}1.8{\sim}2.5{\mu}m$. Conidiogenous cells were ovoid to subcylindrical, discrete, guttulate, and hyaline. Conidia were hyaline, aseptate, smooth, guttulate, oval to subcylindrical, irregular in shape, and $6.0{\sim}7.8{\times}3.0{\sim}3.4{\mu}m$. The strain was confirmed based on phylogenetic analysis of the closest related organism, A. pseudotsugae CBS 288.37, using the partial 28S, internal transcribed spacer rDNA regions, and partial RNA polymerase II second largest subunit locus (RPB2) gene sequences along with its culture characteristics. Therefore, morphological observations and phylogenetic analysis revealed that strain 17E029 is similar to the previously identified A. pseudotsugae. Hence, this species was described as A. pseudotsugae strain 17E029, which is a new record in Korea.

• The Korean Journal of Mycology
• /
• v.12 no.2
• /
• pp.65-73
• /
• 1984

Strain IV caused highest reduction of germination and caused abnormal elongation of all part of the plant which finally died. Milyang 23 and Nampungbyeo formed mesocotyl. Samnambyeo and Jinjubyeo did not formed mesocotyl on the soil surface in nursery boxes when they were planted on soil infested with each strain of F. moniliforme. Infected seedlings with mesocotyl recovered after transplanting in the the field. The most frequency of Strain IV was isolated from infected rices and this strain was isolated from all part of rice. When rice seedling infected with Strain IV were transplanted in paddy field, most of rice showed Bakanae symptom. Ear emergence of rice was more delayed when seedlings infected with Strain IV were transplanted than that of healthy plant. Number of panicle per hill and grain yield from rice when infected rice seedling by Strain IV were transplanted were more decreased than that of the healthy plant in paddy field.