• 펄프종이기술
• /
• 제38권4호
• /
• pp.68-75
• /
• 2006

Electromagnetic shielding sheet using the carbon and wood fiber mixture was manufactured in an effort to develop an electromagnetic shielding packaging material. Carbon fibers were cut into 5, 10, and 15 mm using the automatic cutting device and blown and dispersed using compression air passed through the fine nozzle. Then carbon fibers were slurried with water (0.1% consistency), and softwood kraft pulp along with cone starch were added. The wet mats were manufactured by dewatering in modified hand-sheet machine. The wet mats were pressed upto $4kgf/cm^2$ in the carbon and wood fiber mixture mat press. The wet mats were dried in the automatic controlled plate dryer. Investigation on the formation and surface structure of the newly developed carbon and wood fiber mixture electromagnetic shielding sheet were carried out using the scanning electron microscopy and the image analyzer. Finally electromagnetic shielding characteristics of the newly developed carbon and wood mixture sheet were measured using net-work analyser. The result was promising in the light of the fact that this method could open a new way to substitute the expensive imported electromagnetic shielding sheet.

• 한국산림과학회지
• /
• 제96권2호
• /
• pp.197-202
• /
• 2007

This study is conducted to investigate the factors affecting lumber conversion rate of sawmill industry in South Korea. Data were obtained from the survey of 38 sawmills in all geographic regions of South Korea. The variables examined in this study were region, softwood/hardwood log, domestic/imported/both log, the number of power-driven carriages (PDC) installed, the year when and country where PDCs was manufactured, the horse power of PDC, the number of labors required to operate each PDC, the sawing capacity of mill (mill size), and the types of major product and by-products. The lumber recovery factor (LRF) of sawmills were significantly influenced by the origin of logs, level of PDC automation, sawmill size, and size of logs (measured in diameter and length) while not by the location of the mill, types of major product and by-product, log species, and characteristics of PDC. Although these results provide useful information for understanding the technological characteristics of the Korean sawmill industry, further investigation with larger sample is necessary to reveal the more reliable characteristics of sawmill industry in South Korea.

• Journal of the Korean Wood Science and Technology
• /
• 제52권1호
• /
• pp.58-69
• /
• 2024

To evaluate the adhesive characteristics of mixed cross-laminated timber (CLT) using domestic softwoods structural lumber proposed by KS F 3020 and yellow poplar, penetration depth of adhesive and thickness of bonding line were analyzed based on the results of boiling water soaking delamination. 3 Types of adhesives and 2 types of major layer were divided into a 5 ply CLT using yellow popular as minor layer. The bonding performance of the mixed CLT as structural members was evaluated based on the KS F 2081. The thickness of bonding line between layers of the mixed CLT was measured with a scanning electron microscope, and the adhesive penetration depth in the layer members was measured with an optical microscope. As a result of boiling water soaking delamination test of mixed CLT, the CLT specimens using PRF and PUR adhesives met the requirements of KS F 2081. It was verified that the penetration path of the adhesive in the layes was mainly through the tracheid cell in the case of Japanese larch and Korean red pine layers, and through the vessel and radial tissue in yellow popular layers. The penetration depth of the adhesive was the highest for the PRF adhesive under the same pressing time conditions, and the thickness of the bonding line was in inverse proportion to the penetration depth in the case of the PUR adhesive.

• 펄프종이기술
• /
• 제30권3호
• /
• pp.38-45
• /
• 1998

Soil and water contamination caused by the abundant use of agricultural chemicals including herbicides and fertilizers draws public concerns since these chemicals may pollute the agricultural lands as well as the food products grown on these lands. As a method to reduce the use of agricultural chemicals mulching with thin plastic film has been commonly practised for many years. Although use of the plastic film for mulching is very effective in preventing the growth of weed, it is almost impossible to remove all of the plastic film from the agricultural land and the remaining film eventually contaminates the soils. Therefore, it is very imperative to develop a mulching material that decomposes completely to prevent soil pollution problems and to enhance the competitive edge of domestic agriculture. Mulch papers are believed to have many positive characteristics in preventing problems caused by the plastic mulch film since it decomposes completely after use. However, the basis weight of mulch papers needs to be reduced to improve its handling properties and to reduce the raw material costs of pulps. In this paper the possibilities of using domestic old corrugated containers in producing mulch papers were examined. Also use of unbleached softwood kraft pulps and dry strength additives were exploited along with two-layered sheet forming technology in decreasing the basis weight of the mulch paper. Results showed that reduction of 20g/$m^2$ of basis weight of mulch paper was possible by the appropriate raw material selection and application of strength resin. To use the mulch papers in paddy fields, however, further research to improve its durability should be pursued.

• 펄프종이기술
• /
• 제30권2호
• /
• pp.5-12
• /
• 1998

Exploitation of the papermaking technology to reduce the strength loss that accompanies when using recycled papers as raw materials for papermaking is one of the most important issues imposed upon today's paper industry. Multi-layer sheet forming technology has been suggested as a way that provides some answers to this issue. In this study strength properties of single- and two-layer handsheets formed with recycled fiber and unbleached softwood kraft pulp have been examined to quantify the benefits when using two-layer sheet forming technology rather than a conventional single layer sheet forming precess. Single- and two-layer handsheets were made from 50% of OCC and 50% of Sw-UKP and their strength properties were evaluated. Also the strength properties made from Sw-UKP and OCC sheets were determined. A multihead, which can be attached on the top of hand- sheet former, was used to form two-layer sheets. Maximum strength properties could be obtained in the freeness range of 500∼300mL CSF for Sw-UKP Most of the strength properties was reduced by 30∼35% when 50% OCC was blended with UKP. Decrease of strength properties, however, could be reduced by employing a two-layer sheet forming method. Creator strengths could be obtained when UKP was positioned at the top layer of two layered sheets indicating greater UKP fines retention due to the filtration effect of the OCC layer formed prior to UKP layer contributed the strength improvement. Two-layer sheet showed lower Scott internal bond strength than single layer sheet. By incorporating some of UKP fibers into OCC layer this reduction could be reduced.

• 펄프종이기술
• /
• 제43권4호
• /
• pp.31-39
• /
• 2011

One of the main drawbacks of wood fibers based composite materials are their tendency to swell due to moisture uptake in wet and moist environments. The main contribution to the hygroexpansion usually comes from the hydrophilic wood fibers. Recent trend toward the high speed printing, copying, and precision converting precesses demands a high level of dimensional stability under various environmental conditions. The purpose of this study was to investigate the dimensional stability of softwood bleached kraft pulp handsheets depending on wet pressing conditions. By increasing the number of wet pressing, dimensional stability was decreased because of increased fiber-to-fiber bonding. Hygroexpansion of handsheets had a linear relationship with the relative bonded area and equilibrium moisture contents. Dip elongation was decreased when the number of wet pressing was increased because of increased fiber-to-fiber bonding to resist low load in water.

• Mycobiology
• /
• 제29권4호
• /
• pp.205-209
• /
• 2001

The Korean sawmills have recently recognized the importance of prevention of fungal discoloration due to increased losses in revenue. Before establishing integrated control strategies of fungal discoloration, more complete knowledge about causal organisms is needed. As a first step, we initiated a through survey of fungi colonizing commercially important softwood(Pinus dens flora, Pinus koraiensis, and Pinus radiata) logs and lumber in Korea. In this paper we report results obtained from Japanese red pine(Pinus densiflora) log study. In summer 2000, fungi were isolated from Japanese red pine logs in storage, and identified based on their cultural and morphological characteristics. A total of 595 fungi were isolated, representing 21 genera and 30 species. Mold fungi, mostly Trichoderma species, were the most frequently isolating fungi, representing more than half of all isolates. Dematiaceous fungi represented approximately one fifth of the isolates, and Rhinocladiella atorvirens was the most abundant in all samples. Opiostoma species represented 7% of all isolates from cores planted on malt extract agar(MEA) and the incidence of these species doubled with the addition of streptomycin and cycloheximide to MEA. The results indicate that Japanese red pine sapwood is susceptible to colonization by a variety of fungal species. As a result, control strategies that concentrate on one fungus may have limited success because of interference from competing flora.

• Journal of the Korean Wood Science and Technology
• /
• 제38권3호
• /
• pp.262-273
• /
• 2010

갈색부후균인 Fomitopsis palustris에서 균체 외 cellulase 생산 특성과 이 효소를 이용하여 목재와 볏짚의 당화특성, mediator 첨가 효과, 목질기질의 미세 표면구조나 결정화도가 효소 당화에 미치는 영향 등에 대해 연구하였다. F. palustris의 균체 외 효소의 생산에 혼합목분을 탄소원으로 이용 시 endo-${\beta}$-1,4-gulcanase (EG)는 12.0 U/$m{\ell}$, ${\beta}$-glucosidase (BGL)는 116.68 U/$m{\ell}$, cellobiohydrolase (CBH)는 18.82 U/$m{\ell}$, 그리고 ${\beta}$- xylosidase (BXL)는 13.33 U/$m{\ell}$의 활성을 보였다. 이러한 활성은 BGL, CBH, 그리고 BXL이 볏짚을 이용한 경우보다 약 2~4배 정도 높았다. 볏짚을 탄소원으로 이용하여 생산한 cellulase-RS의 효소 최적반응 온도 및 pH는 $45^{\circ}C$와 pH 5.0이었으며, 혼합 목분을 탄소원으로 이용하여 생산한 cellulase-SW의 경우에는 $50^{\circ}C$와 pH 5.0이었다. Cellulase-SW는 볏짚을 기질로 사용할 때 $40.6{\pm}0.6%$로 가장 높은 당화율을 보였다. 또한 당화촉매제인 Tween 20의 첨가로 당화율이 44%로 상승하여 상용화 효소인 Celluclast 1.5L의 53.7%의 당화율 대비 약 82% 수준으로 상승되었다. 이는 본 실험에서 사용한 효소가 조효소 형태임을 고려하면 상용화 효소에 매우 근접한 당화율을 얻은 것으로 판단된다. 또한 볏짚의 낮은 조직 결정화도와 주사전자현미경을 이용한 볏짚 표면의 섬유화를 통한 표면적 증대 효과는 목재에 비해 높은 볏짚의 당화율에 대한 원인을 제시하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제35권1호
• /
• pp.64-72
• /
• 2007

팔만대장경판을 보관하고 있는 장경판전 내부의 판가 기둥에 대하여 생물적 열화 특성을 조사 연구하였다. 장경판전의 법보전과 수다라장의 판가기둥을 대상으로 연구 검토한 결과, 서가의 위치 및 부위 그리고 주변 환경에 따라 다양한 열화 현상이 있음이 밝혀졌다. 부재의 주요 열화는 미생물에 의한 부후현상으로 밝혀졌으나, 부후가 나타난 부분들은 초석에 접촉된 부위였으며 부후 정도가 매우 극심한 상태를 보였다. 법보전 판가기둥 부후가 더 심했다. 부후형은 백색부후형이 많았다. 그리고 일부판가기둥에서는 곰팡이류의 표면오염이 극심한 것으로 나타났다. 특히 동북, 서북, 북향에 위치한 부재에 더 심한 열화가 나타났으며 건물내부의 전면보다는 후면에 위치한 판가 부재의 부후가 심한 것으로 밝혀졌다 해충에 의한 피해는 거의 없었다.

• 임산에너지
• /
• 제17권1호
• /
• pp.56-70
• /
• 1998

This study was carried out to investigate the structural characteristics of kraft lignin and the wood degrading characteristics, the productivity of ligninolytic enzymes and the enzymatic degradation of kraft lignin by white-rot fungi. To purify kraft lignin, precipitation of kraft pulping black liquors of pitch pine meal was done by titration with lN $H_{2}SO_{4}$ reaching to pH 2, and isolation of the precipitates done by centrifugation. The isolated precipitates from pitch pine were redissloved in lN NaOH, reprecipitated by titration with lN $H_{2}SO_{4}$, washed with deionized water, and kept ofr analysis after freeze drying. Fractionation of the precipitates in solution by successive extraction with $CH_{2}Cl_{2}$ and MeOH, and the fractionates were named SwKL, SwKL I, SwKL II, and SwKL III for pitch pine kraft lignin. The more molecular weights of kraft lignin increased, the less phenolic hydroxyl groups and the more aliphatic hydroxyl groups. Because as the molecular weights increased, the ratio of etherified guaiayl/syringyl(G/S ratio) and the percentage were increased. The spectra obtained by 13C NMR and FTIR assigned by comparing the chemical shifts of various signals with shifts of signals from autherized ones reported. The optimal growth temperature and pH of white-rot fungi in medium were $28^{\circ}C$ and 4.5-5.0, respectively. Especially, in temperature and pH range, and mycelial growth, the best white-rot fungus selected was Phanerochaete chrysosporium for biodegradation. For the degradation pathways, the ligninolytic fungus jcultivated with stationary culture using medium of 1% kraft lignin as a substrate for 3 weeks at $28^{\circ}C$. The weight loss of pitch pine kraft lignin was 15.8%. The degraded products extracted successively methoanol, 90% dioxane and diethyl ether. The ether solubles were analyzed by HPLC. Kraft lignin degradation was initiated in $\beta$-O-4 bonds of lignin by the laccase from Phanerochaete chrysosporium and the degraded compounds were produced from the cleavage of $C\alpha$-$C\beta$ linkages at the side chains by oxidation process. After $C\alpha$-$C\beta$ cleavage, $C\alpha$-Carbon was oxidized and changed into aldehyde and acidic compounds such as syringic acid, syringic aldehyde and vanilline. And the other compound as quinonemethide, coumarin, was analyzed. The structural characteristics of kraft lignin were composed of guaiacyl group substituted functional OHs, methoxyl, and carbonyl at C-3, -4, and -5 and these groups were combinated with $\alpha$ aryl ether, $\beta$ aryl ether and biphenyl. Kraft lignin degradation pathways by Phanerochaete chrysosporium were initially accomplished cleavage of $C\alpha$-$C\beta$ linkages and $C\alpha$ oxidation at the propyl side chains and finally cleavage of aromatic ring and oxidation of OHs.