• Journal of the military operations research society of Korea
• /
• v.17 no.2
• /
• pp.100-112
• /
• 1991

Software system is a hierarchical structure with collection of program units. Software system can import external packages globally or locally depending on the usage within a system. If the imported package is used globally, the soft-ware system can be influenced globally by any change of package and programmer's debugging time for the program maintenance will be greater. To solve these problems, it is desirable to use the imported package locally right on the usage point within the system. The model presented in this paper analyzed entity usage of package in structure of program, identified the usage level to obtain localization and provided information for restructure of the program to localize package usage. To obtain localization, it identified declared entities inside the imported package and analyzed the specification and body part of program unit to identify entities referenced from the imported package. The proposed model can be used to improve the maintainability of software system and contributed to reduction of programmer's debugging time in program maintenance.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.855-858
• /
• 2001

The single transformer appeared the electro-magnetic force must be constructed to support it. it must construct the single transformer to supporting the electro-magnetic force appeared by the cut-off current. the problem is that the electro-magnetic occurs the modification of the single transformer and an serious accident. In the case of the molding-transformer, the part of the molding cast used in the construction occurs the crack, because of the strong force. therefore, in this paper, the molding material used in the molding-transformer is settled by comparing the results from commercial soft ware of F.E.M and a out-equipment circuit.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1300-1302
• /
• 2001

For developing a 100 kW MCFC power generation system. Several design parameters for a fuel cell stack and system analysis results by Cycle Tempo, a processing computer soft ware, were described. Approximately 170 cells are required to generate 100 kW at a current density of $125mA/cm^2$ with $6000cm^2$ cells. An overall heat balance was calculated to predict exit temperature. The 100 kW power is expected only under pressurized operation condition at 3 atm. Recycle of cathode gas by more than 50% is recommended to run the stack at $125mA/cm^2$ and 3 atm. Manifolds should be designed based on gas flow rates for the suggested operating condition. The fuel cell power generation system was designed conceptually with several choices of utilization of anode exhaust gas. Also system efficiency was calculated at various type of system and operation conditions.

• Journal of radiological science and technology
• /
• v.10 no.1
• /
• pp.91-104
• /
• 1987

Computerization for the work of diagnostic radiology department is needed to manage the department efficiently, to deal with the information increasing gradually, and to provide qualified care for patients. There is few computerized management system for diagnostic radiology department in our country. Foreign systems were developed commercially and academically, but almost failed to meet the needs of demands. So in this paper, to help the exploitation of soft ware suitable for the information system of diagnostic radiology department of our country; 1) foreign systems were introduced. 2) Data flow of diagnositc radiology department was analysised by SSA method. 3) Composition of computer system centered on the functions of terminals was presented.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.567-570
• /
• 1989

A constant V/F control system of voltage contrlled PWM inverter has a unstable operation of the low- speed and the light-load. In this paper, the authors propose stability control with idealized operation of induction motor by the neglect of primary leakage inductance and resistance. Also ldealized operation system is adopted voltage error, feed back impedance circuit, and increasing resistance from dead time of switching is compensated by the soft ware with u-processors. The proposed simulation of the idealized control method is proved at the low-speed operation for three phase induction motor.

• Journal of Aerospace System Engineering
• /
• v.1 no.1
• /
• pp.60-66
• /
• 2007

The importance of software development in the integration of an avionics system is continuously increasing. And we can expect enlarged soft ware portion in the system integration for the more intelligent, reliable, and automated avionics system. For an avionics system software development the selection of a real-time operating system and internal avionics data bus protocol is very important from the viewpoint of the integration with the system hardware. In this paper, we present current trend of an avionics system software development including software development methodology, software development process, and international software process assessment improvement model.

• Journal of Astronomy and Space Sciences
• /
• v.17 no.2
• /
• pp.309-316
• /
• 2000

KOMPSAT-2 will carry MSC(Multi-Spectral Camera) which provides 1m resolution panchromatic and 4m resolution multi-spectral images at the altitude of 685km sun-synchronous mission orbit. The mission operation of KOMSPAT-2 is to provide the earth observation using MSC with nadir pointing. KOMPSAT-2 will also have the capability of roll/pitch tilt maneuver using reaction wheel of satellite as required. In order to protect MSC from thermal distortion as well as direct sunlight, MSC shall be operated within the constraint of sun incidence angle. It is expected that the sunlight will not violate the constraint of sun incidence angle for normal mission operations without roll/pitch maneuver. However, during roll/pitch tilt operations, optical module of MSC may be damaged by the sunlight. This study analyzed sun incidence angle of payload using KOMPSAT-2 AOCS (Attitude and Orbit Control Subsystem) Design and Performance Analysis Soft ware for KOMPSAT-2 normal mission operations.

• Proceedings of the KIPE Conference
• /
• 2019.11a
• /
• pp.128-129
• /
• 2019

ITER AC/DC Converter는 플라즈마 운전에서 기능적인 역할과 동작 모드에 따라 PF/CS, TF, CC Plant로 구분되어 동작하며 PF, CS, VS1 컨버터는 플라즈마 전류 발생, 증감, 형상제어, 위치제어를 하며 PCS(Plasma Control System), MRC(Master Controller)에 의해 제어된다. MRC는 상위 제어인 PCS와 LCC(Local Control Cubicle)의 Middle Ware Layer에서 여러 Linux Machine들과 복잡한 통신망으로 연결되어 초전도 코일 전류 Driver에 있어서 Control과 Soft Down을 위한 Real Time 제어 기능을 한다. 본 논문은 이러한 제어를 구현하기 위한 Linux Real Time Control Thread Design의 구성과 결과를 논의하고자 한다.

• Proceedings of the ESK Conference
• /
• 1993.10a
• /
• pp.21-30
• /
• 1993

This paper describes the development of a simulation model of nuclear power plant operators including cognitive aspects by using a network modeling soft ware, Micro-SAINT (System Analysis of Integrated Networks of Tasks) for the analysis of operator performance. Network model description based on Micro-SAINT includes tasks, resources, precedence relations among tasks, flow of information and PSFs (Performance Shaping Factors) on task performance. We have tried to evaluate the performance with several performance measures such as the number of tasks allocated, relative time presure among operators within a shift, for the selected test accident scenarior; small-break LOCA (Loss of Coolant Accident) in a PWR (Pressurized Water Reactor) type nuclear power plant.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.20 no.4
• /
• pp.16-23
• /
• 1983

A programmable controller (PC) which can control general sequential process is developed. The Z-8OA microprocessor-based PC includes hardwares such as programming device, input/output modules, timer/counter modules, and power-failure recovery module which for soft-ware, initialization program, monitor program, execution program, and power-failure recovery program are developed. In particular, the PC is designed in such a way that a timer can be used several times in different time intervals and a skip capability is incorporated in the user program to reduce scan time.