• 한국표면공학회지
• /
• 제29권6호
• /
• pp.628-633
• /
• 1996

Large saturation magnetization $4pM_s$ is essentially required for soft magnetic thin layers used in magnetic recording devices. Amorphous Co-based alloys and Fe-Co alloys may be regarded as one of the candidates for soft magnetic materials which possess large $4\piM_s$. Some preparation process to improve soft magnetism of these films were performed in this study. Addition of Ta seemed to be effective to change the magnetostriction constant $\lambda$ from positive value to negative one. The magnetoelastic energy $K_e$ is strongly dependent on $\lambda$. $(Co_{95.7}Zr_{4.3})_{100-x}Ta_x$ films with $K_e$ of negative value have sufficiently soft magnetic characteristics. $Fe_{90}Co_{10}$ alloy exhibits extremely large $4\piM_s$, of about 24 kG. Addition of N and Ta to $Fe_{90}Co_{10}$ films improved the soft magnetism of them. The $Fe_{82.0}Co_{7.6}Ta_{10.4}$:N/Ti multilayered films exhibit better soft magnetic properties and better thermal stability than Fe-Co-Ta:N singlelayer films.

• Journal of Magnetics
• /
• 제5권3호
• /
• pp.76-80
• /
• 2000

Soft x-ray standing waves produced by a multilayer interference substrate add depth-sensitivity to magnetic circular dichroism to resolve changes in Co magnetism across a 10${\AA}$ distance from the Co center to the Co-Pd interface of a Pd/Co/Pd trilayer having in-plane magnetization. Large enhancements of in-plane orbital and spin magnetic moments, as well as the number of d holes, are strongly localized in a thin interface layer. These results provide new insight into the phenomenon of magnetic anisotropy at buried interfaces, and suggest a broad applicability of such standing wave measurements to interface magnetism studies.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2000년도 International Symposium on Magnetics The 2000 Fall Conference
• /
• pp.207-216
• /
• 2000

Soft x-ray standing waves produced by a multilayer interference substrate add depth-sensitivity to magnetic circular dichroism to resolve changes in Co magnetism across a 10 ${\AA}$ distance from the Co center to the Co-Pd interface of a Pd/Co/Pd trilayer having in-plane magnetization. Large enhancements of in-plane orbital and spin magnetic moments, as well as the number of d holes, are strongly localized in thin interface layer. These results provide new insight into the phenomenon of magnetic anisotropy at buried interfaces, and suggest a broad applicability of such standing wave measurements to interface magnetism studies.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2008년도 제34회 동계학술대회 초록집
• /
• pp.146-146
• /
• 2008

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2011년도 자성 및 자성재료 국제학술대회
• /
• pp.109-109
• /
• 2011

• Journal of Magnetics
• /
• 제21권2호
• /
• pp.235-238
• /
• 2016

Microstructure and magnetization behaviors of $MnBi/Fe_3B/Nd2_Fe_{14}B$ nanocomposite alloy have been investigated. It was found that the coercivity increased firstly and then decreased, and saturation magnetization decreased with the additon of MnBi alloy. The addition of 40 wt.% MnBi powder enhanced the coercivity from 192.8 kA/m to 311.2 kA/m. The ${\delta}M$ and D(H)-H plots suggested the occurrence of a stronger exchange-coupling occurring between the hard and soft magnetic phase for this sample. The dependence of coercivity with temperature was discussed in 40 wt.% $Mn_{55}Bi_{45}$/ 60 wt.% $Nd_{4.5}Fe_{76.5}Nb_{0.5}B_{18.5}$ alloy powder, and a positive temperature coefficient was founded from 298 K to 350 K.

• 한국자기학회지
• /
• 제19권6호
• /
• pp.197-202
• /
• 2009

코닝유리(Corning glass) 기판 위에 이온빔 증착법으로 제작한 버퍼(Ta)/코네틱(Conetic; NiFeCuMo) 박막에 대해 버퍼층에 의존하는 결정성장과 열처리 효과를 조사하였다. 또한 코네틱층을 증착할 때에 인가한 자기장 방향으로 용이축과 곤란축의 자기저항 곡선으로부터 얻은 보자력과 포화자기장값을 버퍼층 유무에 따라 서로 비교하였다. Ta 박막의 두께가 5 nm이고 코네틱 박막의 두께가 50 nm일 때에 보자력은 0.12 Oe으로 작았으며, MH 히스테리시스 곡선에서 얻은 자화율($\chi$)은 1.2 ${\times}\;10^4$으로 우수한 연자성의 특성을 가졌다. 저자기장에 민감한 거대자기저항 스핀밸브(GMR-SV; giant magneoresistance-spin valve)나 자기터널링접합(MTJ; megnetic tunnel junction) 박막구조에서 자유층으로 연자성의 특성이 우수한 코네틱 박막을 사용할 수 있는 가능성을 확인하였다.

• Journal of Magnetics
• /
• 제18권3호
• /
• pp.240-244
• /
• 2013

The influences of Gallium doping on the magnetic microstructures and corrosion behaviors of Nd-Fe-B-Ti-C alloys are investigated. The cooling rate for obtaining fully amorphous structure is raised, and the glassforming ability is improved by the Ga addition. The High Resolution Transmission Electron Microscopy image shows that the ${\alpha}$-Fe and $Fe_3B$ soft magnetic phases become granular surrounded by the $Nd_2Fe_{14}B$ hard magnetic phase. The rms and $({\Delta}{\varphi})_{rms}$ value of Nd-Fe-B-Ti-C nanocomposite alloy thick ribbons in the typical topographic and magnetic force images detected by Magnetic Force Microscopy(MFM) decreases with 0.5 at% Ga addition. The corrosion resistances of $Nd_9Fe_{73}B_{12.6}C_{1.4}Ti_{4-x}Ga_x$ (x = 0, 0.5, 1) alloys are enhanced by the Ga addition. It can be attributed to the formation of more amorphous phases in the Ga doped samples.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1991년도 춘계연구발표회 논문개요집
• /
• pp.15-16
• /
• 1991

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1240-1243
• /
• 2008

The tempering and magnetic annealing are used to improve the soft magnetic properties such as initial permeability coercivity and core loss of the KM35F alloy. The first heat treatmentis performed at the temperature less than the curie temperature of the KM35F alloy to remove the thermal stress for few hours in nitrogen atmosphere. The second stage heat treatment is performed the magnetic annealing at $500{\sim}800^{\circ}C$ for few hours in nitrogen atmosphere, and then quenching to room temperature in absence of oxygen. Finally, magnetic properties of the thermally treated KM35F alloy are investigated for application as a soft magnetic material of the ISO solenoid valve core and plunger.