• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.7A
• /
• pp.515-522
• /
• 2009

In this paper, a novel transmission scheme with spatial modulation is proposed for coded orthogonal frequency division multiplexing (OFDM). The multiple-input multiple-output (MIMO) technique, so-called spatial modulation (SM), divides input data into antenna index and data signals, transmitting data signals through the specific antenna chosen by the antenna index. In order to retrieve data stream at the receiver, SM needs to detect the antenna index which means that data signals are transmitted via a certain antenna. For this reason, it should be guaranteed that channel matrix is orthogonal. For the real environment, a MIMO channel has difficulty in maintaining orthogonality due to spatial correlation. Moreover, the receiver of the conventional SM is operated by hard decision, so that this scheme has a limit to be adopted for practical systems. Therefore, soft-output demappers for the conventional and proposed schemes are derived to detect antenna index and data stream by soft decision, and a novel transmission scheme combined with spatial modulation is proposed to improve the bit error rate (BER) performance of the conventional scheme.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.1
• /
• pp.15-23
• /
• 2009

Microprocessors, which need correct arithmetic operations, have been the subject of in-depth research in relation to soft errors. Of the existing microprocessor devices, the memory cell is the most vulnerable to soft errors. Moreover, when soft errors emerge in a memory cell, the processes and operations are greatly affected because the memory cell contains important information and instructions about the entire process or operation. Users do not realize that if soft errors go undetected, arithmetic operations and processes will have unexpected outcomes. In the field of architectural design, the tool that is commonly used to detect and correct soft errors is the error check and correction code. The Itanium, IBM PowerPC G5 microprocessors contain Hamming and Rasio codes in their level-2 cache. This research, however, focuses on huge server devices and does not consider power consumption. As the operating and threshold voltage is currently shrinking with the emergence of high-density and low-power embedded microprocessors, there is an urgent need to develop ECC (error check correction) circuits. In this study, the in-output data of the level-2 cache were analyzed using SimpleScalar-ARM, and a 32-bit H-matrix for the level-2 cache of an embedded microprocessor is proposed. From the point of view of power consumption, the proposed H-matrix can be implemented using a schematic editor of Cadence. Therefore, it is comparable to the modified Hamming code, which uses H-spice. The MiBench program and TSMC 0.18 um were used in this study for verification purposes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.4A
• /
• pp.539-545
• /
• 2000

A 40-Mb/s, 64-state, R= 1/2, 3 bit soft decision Viterbi decoder based on Radix-4 method has been designed and fabricated using a FLEX10K CPLD chip in this paper. In order to implement the high-speed Viterbi decoder, the architectures of adder-compare-select(ACS), branch metric calculation(BMC), trace back(TB) are present. In practical designed by ASIC, the speed is faster than that of CPLD by 6~7 times. Therefore, 40 Mb/s Viterbi decoder architecture can be used for high-speed wireless multimedia communications with 200 Mb/s.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.249-252
• /
• 2001

TCM(Trellis Coded Modulation) has soft decision scheme so that BM(Branch Metric) calculates the ED(Euclidean Distance) between the received signal and each code words in signal space. For computing the ED, square and square root computations increase the hardware complexity. Some simplified method is known for convolutional codes with QPSK(Quadrature Phase Shift Keying), PSK(Phase Shift Keying) modulation. But it is not acceptable for QAM (Quadrature Amplitude Modulation)-TCM scheme. In this paper, we suggest that two modified BM computation methods, which is applicable for QAM-TCM. By comparative study, we also assessed two proposed method in the case of hardware complexity and BER (Bit Error Rate) performance.

• Journal of Korean Medical classics
• /
• v.21 no.3
• /
• pp.119-125
• /
• 2008

Among the various pulse diagnosis contents in "Hwangjenaegyeong(黃帝內經)", we researched the pulse conditions that are belonged to Sameumsamyang(三陰三陽), and made a comparative study with pulse conditions of five organs[五臟], that of six meridians in "Sanghallon(傷寒論)". So from now on, this study would make help to understand standard pulse condition of Sameumsamyang(三陰三陽) diseases for clinical application. In "Hwangjenaegyeong(黃帝內經)", pulse condition of Taeyang(太陽) is expressed to be floating, Yangmyeong(陽明)'s condition to be strong but with a little bit weakness, Soyang(少陽)'s condition to be intermediate between Eum(陰) and Yang(陽), Taeeum(太陰)'s condition to be low and soft, So-eum(少陰)'s condition to be low and weak with some occasional upward tendency, Gweoleum(厥陰)'s condition to be mixed state of Eum and Yang.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.07a
• /
• pp.1-3
• /
• 2010

스피어 복호 알고리즘 (sphere decoding algorithm)은 다중 입출력 (MIMO) 통신 시스템에서 사용되는 복호기중 최대 우도 복호기 (Maximum Likelihood Detector)와 비슷한 BER(bit error rate)성능을 가지고 복잡도를 줄일수 있어서 최근 많이 연구되어 왔다. 이때 공간 다중화와 채널 부호의 연접시스템에서 연판정 정보(Soft output information) 를 스피어 복호 알고리즘을 통해 생성하기 위한 방법으로 리스트 스피어 복호 알고리즘 (List Sphere Decoding)이 알려져있다. 기존 리스트 스피어 디코딩 알고리즘은 리스트를 반지름을 업데이트 하지 않으므로 탐색시 복잡도가 매우 높다는것이 문제가 되므로, 차원별로 최적해의 가능성이 높은 격자 주변으로 검색을 제한하여 복잡도를 줄이는 알고리즘을 제안하고 성능과 복잡도를 실험한다.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.190-196
• /
• 2009

In this paper, performance of a turbo-coded OFDM system is analyzed and simulated in a power line communication channel. Since the power line communication system typically operates in a hostile environment, turbo code has been employed to enhance reliability of transmitted data. The performance is evaluated in terms of bit error probability. As turbo decoding algorithms, MAP (maximum a posteriori), Max-Log-MAP, and SOVA (soft decision Viterbi output) algorithms are chosen and their performances are compared. From simulation results, it is demonstrated that Max-Log-MAP algorithm is promising in terms of performance and complexity. It is shown that performance is substantially improved by increasing the number of iterations and interleaver length of a turbo encoder. The results in this paper can be applied to OFDM-based high-speed power line communication systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.11A
• /
• pp.1652-1660
• /
• 2000

본 논문에서는 DS/CDMA (Direct Sequence/Code Division Multipe Access) 시스템에서 임시 판정 함수로서 연판정 함수와 경판정 함수를 적용한 파이프라인화된 직렬 간섭 제어 구조(PSIC, Pipelined Successive Interference Cancellation)의 성능을 수식적으로 분석하고, 모의 실험을 통하여 검증한다. PSIC 구조는 다단 직렬 간섭 제거 구조(MSIC, Multistage Successive Interference Cancellation)가 가지는 복호지연(decoding delay)의 문제를 해결하기 위해 파이프라인 구조를 MSIC에 적용한 것이다. 제안된PSIC 구조는 하드웨어의 복잡도(hardwar complexity)를 희생하여 비트 오율(BER, Bit Error Rate)의 증가 없이 MSIC에서 발생하는 복호 지연을 줄일 수 있다. 또한 제안된 PSIC 구조에서 연판정 함수와 경판정 함수를 각 간섭 제거 단(Cancellation stage)에서의 임시 판정 함수로 사용하여 얻게 되는 PSIC 구조들의 성능을 비교한다. 분석 및 실험 결과에 의하면 제안되 PSIC 구조에서는 경판정 함수를 사용할때의 성능이 연판정 함수를 사용할때의 성능보다 우수함을 알 수 있었다.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.249-251
• /
• 1994

This paper introduces an implementation of high performance voltage source inverter system based on 16bit micro-processor and DSP for the application to modem rolling stock traction system. In contrast with other industry oriented inverter system, this system requires precise control action complying with various load condition and high overload capability. An asynchronous PWM generation and 3' pulse mode technology are adopted in order to improve compliant starting torque characteristics at starting phase and soft backward-forward starting motion.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.16 no.2
• /
• pp.215-220
• /
• 1994

In the case of the trauma on the maxillofacial region occurred, we think that one of the most important thing is recovery of the function as well as reconstruction of the anatomical form. Especially, it has been that the structure of the surrounded temporomandibular joint has a great possibility to cause mouth opening limitation when a bit of displacement is caused. Therefore, in the case of the trauma on mid-face we think that we treat it after complete evaluate condition of soft and hard tissue surrounding the articular disc as well as fracture site. We report results of our study, since we obtained good results from our study concerning the refixation of the zygomatic arch, high condylectomy, coronoidectomy and myotomy for the patient being suffered from the arthrosis of the temporomandibular joint caused by insufficient fracture treatment of zygomatic arch and coronoid process.