• International Journal of Precision Engineering and Manufacturing
• /
• 제9권4호
• /
• pp.66-70
• /
• 2008

The propagation of a mixed-mode crack in soda-lime silica glass is modeled by movable cellular automata (MCA). In this model, a special fracture criterion is used to describe the process of crack initiation and propagation. The results obtained using the MCA criterion are compared to those obtained from other crack initiation criteria, The crack resistance curves and bifurcation angles are determined for various loading angles. The MCA results are in close agreement with results obtained using the maximum circumferential tensile stress criterion.

• Bulletin of the Korean Chemical Society
• /
• 제24권12호
• /
• pp.1827-1831
• /
• 2003

Field emission of carbon nanotubes (CNTs) fabricated by disproportionation of CO has been studied. CNTs fabricated on well-ordered Co nanowire arrays formed on the porous anodic aluminum oxide templates were well graphitized, uniform in diameter and aligned vertically with respect to the plane of the template, and showed a good field emission property. Very uniform emissions were observed from the CNTs fabricated at relatively low temperature, $500-600^{\circ}C$. Low fabrication temperature such as $500^{\circ}C$ could make it possible to fabricate CNTs on soda lime glass, a low-cost substrate, for display panel.

• 한국세라믹학회지
• /
• 제25권6호
• /
• pp.665-670
• /
• 1988

The behavior of mechanical properties of ion exchanged glasses was investigated in this study. The used glasses were soda-lime-silica glasses that were produced by float process. The maximum values of the bending strength and the curvature depth are 45Kg/$\textrm{mm}^2$ and 8.6mm respectively treated at 45$0^{\circ}C$ for 6h, which are 4.4 times and 3.3 times higher than parent glass. In the case, the thermalshock resistance ΔT is 335$^{\circ}C$ that is 205$^{\circ}C$ higher than parent glass, which is the maximum values in this study. The maximum values of the surface microhardness is 490Kg/$\textrm{mm}^2$ in case of 43$0^{\circ}C$ for 4h. It is also found out that annealing points are increased linearly with increasing the amount of K+ ion exchange independent of treatment temperature. Furthermore, the present work shows that the ion exchange strengthened glasses are more effective than the physical tempering glasses ; the bending strength and the curvature depth are 1.8 times and twice higher respectively.

• Journal of Information Display
• /
• 제4권3호
• /
• pp.12-16
• /
• 2003

In connection with the ion exchange strengthening on soda-lime-silicate, substrate glass for display use was investigated. In the processing, the temperature was varied during the ion exchange in order to make stress profile and to determine optimum condition. In the present work, we found that the maximum value of strength was 617.8 MPa after an ion exchange process at 470 $^{\circ}C$ for 1h, and then, at 450 $^{\circ}C$ for 24h. Also, the effect of residual stress placed on the near surface was measured by analyzing the number of crack branches and brittleness. This approach allowed us the residual stress profile to be engineered to improve mechanical reliability.

• 한국기계가공학회지
• /
• 제13권6호
• /
• pp.145-151
• /
• 2014

The glass used for mobile display windows is required to have high strength. Chemical strengthening by means of ion exchange is widely used glass. The depth of the layer and the compressed stress are affected by tempering temperature and time. The purpose of this study is to investigate the range of DOL and CS, which to less breakage during reliability tests such as the ball drop test, hole drop test, 3-point bending test, drop test, and tumble test with Soda-lime Glass.

• 한국환경보건학회지
• /
• 제33권1호
• /
• pp.43-48
• /
• 2007

This study investigated the effects of pH, alkalinity, and chlorine ion which are important water quality impact factors to the corrosion in the simulated distribution system where the copper pipe is affixed. The result shows that pitting index was increased as the alkalinity and chloride ion increase in the distilled water, but there was no relation to pH. Actually the uniform corrosion rate was decreased as the pH increase with the laboratory tap water. In conclusion, it is necessary to control the pH which stands above minimum 7.5 to prevent pitting corrosion in the copper pipe. Consequently, comprehensive research about the effect of lime soda($Ca(OH)_2$) which was used as a coagulation additive in the water treatment plant to pipe corrosion must be accomplished additionally.

• 한국세라믹학회지
• /
• 제33권7호
• /
• pp.735-742
• /
• 1996

Antimony-doped Tin oxide (ATO) thin films were deposited on soda-lime glass substrates by DC magnetron sputtering technique. Effects of DC power film thickness and post heat-treatment on electrical conductivity of ATO film were investigated. Other properties of ATO film such as optical anti-chemical and wear properties were also reported in this work. The obtained ATO films showed electrical resistivities ranging from 5$\times$10-3 $\Omega$cm to 3$\times$10-3 $\Omega$cm with the average optical transparency above 80% in visible wavelength range and excel-lent anti-chemical properties where the electrical resistivity was not changed even after soaking the films in 1M HCl or 1M NaOH solution for 10 days. These properties were found to be related to the crystallinity of ATO film and the films having higher crystallinity showed better properties.

• 한국전기전자재료학회논문지
• /
• 제17권6호
• /
• pp.647-651
• /
• 2004

We fabricated the 1-inch diode type flat lamp using CNTs, which were grown directly on soda-lime glass substrate at 600 ∼ 650 $^{\circ}C$ by thermal chemical vapor deposition(CVD) of acetylene gas. Turn- on field was about 2.8 V/${\mu}{\textrm}{m}$. We observed that uniform and high brightness had been obtained. The brightness of CNT flat lamp was measured up to about 14 kcd/$m^2$ at 2000V in spacing of 500 ${\mu}{\textrm}{m}$. The results showed that the CNTs were very good emission source and suitable for application in the lamp.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권7호
• /
• pp.700-705
• /
• 1997

Transparent conducting indium tin oxide (TC-ITO) thin films are deposited on soda lime glass by a dc magnetron sputtering technique having the unbalanced-magnet structure in order to improve the electrical/material characteristics and to avoid the surface damages. The material properties are measured by the x-ray diffractometer (XRD) and atomic force microscope (AFM). The (400) peak as the preferred orientation of <100> direction for ITO thin films is stabilized with the increase of substrate temperature. The surface roughness estimated by AFM 3D image at the substrate temperature of 40$0^{\circ}C$ is extremely uniform. The best resistivity of ITO films (5500 $\AA$ thick) at 40$0^{\circ}C$ is about 1.3$\times$10$^{-4}$ $\Omega$cm on the position of 4 cm from substrate center.

• 한국진공학회지
• /
• 제9권1호
• /
• pp.24-29
• /
• 2000

MgO thin films were deposited on soda lime glass substrates by rf magnetron sputtering using a MgO target at various oxygen flow ratios in order to probe the relationship between MgO film properties and discharge characteristics. MgO films have a tendency to form microstructures with a preferred growth orientation of (200) with increasing oxygen flo ration up to 0.1 $O_2$/(Ar+$O_2$). MgO film obtained at 0.1[$O_2$/(Ar+$O_2$)] was found to be fully stoichiometric. The stoichiometric MgO film was observed to have relatively very clean surface and grains of large size and contain almost no hydroxyl group. The AC PDP with fully stoichiometric MgO film showed lower firing and sustain voltages than those with magnesium-rich or oxygen-rich MgO films, being largely attributed to the larger grain size and the minimized hydroxyl group.