• Journal of Conservation Science
• /
• v.29 no.3
• /
• pp.279-286
• /
• 2013

It is characterized and classified as the type of red brown glass beads to compare the chemical composition and manufacturing technique on the 141 samples in 12 sites of the Three Kingdom Period analyzed until now. It can be divided into three types according to the chemical composition of stabilizers(CaO & $Al_2O_3$) and soda raw materials(MgO & $K_2O$) on the red brown glass beads except one sample. Type I of high alumina glass is identified as the most common types that is 78.6 % of the distribution ratio at analytical samples and is excavated the most from ruin sites. In contrast, type II, 13.6 % of distribution ratio at analytical samples, is about 5 % CaO and $Al_2O_3$, MgO and $K_2O$ at around 1.5 % is similar to the composition of plant ash glass. Type III is that the content of CaO is higher than $Al_2O_3$ and the content of MgO and $K_2O$ is below 1.5 %. It is the same as the composition of natron glass and its share is the lowest as 7.9 %. Of these, type III is divided into two types according to the content of MgO and $K_2O$. It is identified that manufacturing technique of type I and II is drawing and type III is casting method with microscopic investigations. Type II and III is estimated that raw materials is different because is confirmed in the majority of ruins in spite of the fact that distribution ratio is very low. So, red brown glass beads distributed in Korea Peninsula are divided into three types of glass culture.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.12
• /
• pp.1273-1280
• /
• 2008

This study sought to establish the optimum operating condition for the recovery of caustic (NaOH) solution from mercerization in textile process. As main factors, the silt density index (SDI) evaluation of ceramic membrane for the application of nanofiltration/reverse osmosis (NF/RO) membrane, the recovery yield measurement of caustic solution for the application of polymeric membrane, the optimum condition of chemical cleaning for the membrane regeneration, the optimum removal condition of total organic carbon (TOC), turbidity, color, and the permeate flux of ceramic membrane/polymeric membrane combined process were investigated. As results, ceramic ultrafiltration (UF) in the first step and nanofiltration (NF) in the second step were found to be suitable for the removal of total suspended solid (TSS), residual organics, turbidity including color, and the recovery of caustic solution from caustic wastewater stream in mercerization process. When only the ceramic UF membrane was used, the rejection efficiency of both of TSS and turbidity was more than 99.0%, and the color and TOC were rejected about 74.7% and 49.2%, respectively. Meanwhile, the combined membrane precess of UF and NF membranes showed even more efficient removal abilities and thus more than 99.9% of TSS and turbidity, 87.7% of color, and 78.2% of TOC were removed. In particular, 91.3% of NaOH was successfully recovered with 83.7% of total volume in the combined membrane process. With this regard, a clean caustic solution was obtained in a high purity, which can be reused for mercerization process, expecting to offer economical benefits.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.02a
• /
• pp.24-24
• /
• 1998

반도체장비를 포함하는 초고진공장비의 園훌化가 급속히 그리고 절실히 요구되고 있는 것이 현실정이다. 當面해서 실현할 국산진공장비의 대상은 廣範圍하다. 즉, 각종 진공 pump ( (rotary, dry, diffusion, cryo, ion, turbo melecular pump), 진공 chamber, 진공 line, gate valve 를 위 시 한 진공 V머ve, flange, gasket, fl않d야lU, mainpulater 퉁 진공 部品이 다. 진공계 의 핵심 은 適切하고 優良한 진공재료의 선태파 사용이다. 진공장비는 사용자가 원하는 진공도를 원하 는 시간 동안 륨空度를 유지해 주어야 한다. 진공재료 선태의 기준사항은:(1) 기체의 透過성 (2) 薰했훌 (3) 혔體放出특성 - -outgassing과 degassing- (4) 機械的 량훌度 (5) 온도 의존성 (6) 化學톡성 (7) 加I성 및 鎔接 성 (8) 課電특성 (9) 磁氣특성 (10) 高速함子 및 放射線 특성 (11) 經濟성 및 調達생 둥이 다. 우량한 초고진공계재료는 풍부하게 개발되어 왔고, 또 新材料들이 개발되고 있다. 여기에서는 주로 초고진공 내지는 극고진공계의 構造材料, 機能材料, 部品材料 일반파 몇가지 신재료의 특 성에 관해서 記述한다. M Mild SteeHSAE, 1112, 1010, 1020, 1022, etc)., S Stainless SteeHAlSI, 304, 304L, 310, 316, 321, 347): 구조재료, chamber, fl하1ges A Aluminum과 Alloys (1060, 1100, 2014, 4032, 6(뻐1): 구조재료, chamber, flanges, gaskets A AI, Al 떠loy는 SS에 代替하는 역 할올 시 작하고 있다. C Copper, Copper Alloys(C11$\alpha$)0, C26800, C61400, Cl7200): 내장인자, gasket, cryopanel, tubing T Titanium, Ziriconium, Haf띠um 및 Alloys: 특히 Ti은 10n pump 용 getter material 이 외 에 U UHV,XHV용 chamber계로서 관심올 끌고 있다. N Nickel, Nickel Alloys (200, 204, 211, monel, nichrome): 부식 방지 , 전자장치 , 자기 장치 귀 금속(Ag, Au, Pt, Pd, Rh, Ir, Os, Ru): 보조부품, gasket, filament, coating, thermocouple, 접 합부위 T TiC, SiC, zrC, HfC, TaC 둥의 탄화물과, BN, TiN, AlN 동의 질화물, 붕화물이 둥장하고 었 다. 유리: Soda Lime, Borosilicate, Potash Soda Lead: View Port, Chamber envelope C Ceramics: AlZ03, BeO, MgO, zrOz, SiOz, MgOzSiOz, 3Alz032SiOz, Z$textsc{k}$hSiOz S상N4: e electrical, thermal insulators, crucibles, boats, single crystals, sepctr려 windows 저자는 최근 저자들이 발견한 Zr-Ti-Cu-Ni-Be amorphous alloys coated cham뾰r가 radiation p proof로 이용될 수 있는 사실을 점검하고 었다 .. Z.Y. Hua 들은 Cs3Sb를 새로운 photocathode 재료로 보고하고 있다.

• Journal of Conservation Science
• /
• v.33 no.5
• /
• pp.331-344
• /
• 2017

In this study, glass beads from Osan Sucheong were classified according to color into 10 groups. Among these groups, reddish brown, bluish green, and purplish blue were identified as the main colors of glass beads based on their large quantities in Osan Sucheong. The glass beads of these main colors were then classified according to their chemical compositions and and looked at the changing process. Based on the results, reddish brown and bluish green glass beads can both be divided into five types, and purplish blue glass beads can be divided into four types. Furthermore, according to continuity of type, it was identified as the main attributes that the reddish brown beads belong to two types, whereas the bluish green and purplish blue each belong to one type. Based on a review of primary attributes, beads of these three colors were identified as soda glass and high-alumina glass. The results indicate that these beads came from a single, consistent route of origin into the region. However, it is possible that glass beads came through various routes into Osan Sucheong in the $4^{th}$ century, because many types of chemical compositions have been detected for beads from this time.

• Korean Journal of Community Nutrition
• /
• v.18 no.2
• /
• pp.165-176
• /
• 2013

The objective of this study was to analyze the influence of socio-demographic factors on food consumption frequencies among adolescents in Korea. Data were obtained from the Seventh Korea Youth Risk Behavior Web-based Survey (2011 KYRBS), a nationwide representative sample of 75,643 (37,873 males and 37,770 females) middle and high school students. It was carried out as a self-administered on-line survey. The frequency of eating breakfast was 4.8 times per week for middle school students and 4.6 times per week for high school students (p < 0.001). Higher levels of perceived household economic status, family affluence scale (FAS) and education attainment of mother were associated with more frequent breakfast eating. The frequencies of consumption of vegetables and milk were higher in males than in females (p < 0.001). The frequency of consumption fruits was higher in females than in males (p < 0.01). Higher levels of perceived household economic status, FAS and education attainment of mother were associated with more frequent consumption of vegetable, fruits and milk. The frequencies of consumption of soda, fast food and instant noodls were higher in males than in females (p < 0.001). The frequency of consumption of snacks was higher in females than in males. Adolescents with lower levels of FAS and education attainment of mother were at risk for skipping breakfast and consuming of soda, fast food and instant noodls more frequently. Whereas, adolescents with higher levels of FAS, education attainment of mother were more likely to be frequent consumers of vegetable, fruits and milk. These findings demonstrated that being high school students and belonging to lower level of socio-economic status (SES) were associated with undesirable food habits.

• Journal of Korean society of Dental Hygiene
• /
• v.10 no.5
• /
• pp.851-860
• /
• 2010

Objectives : This study examined the oral health behavior and dental services utilization of adolescents in order to provide information on how to disseminate the correct oral health behavior to the youth and develop programs for the approach. Methods : The raw data of 'The Third 2007 Youth Health Behavior Online Survey' carried out by the Korea Center for Disease Control and Prevention were analyzed. All survey data collected was processed using SPSS ver 17.0 for data analysis as Frequency analysis, chi-square and Logistic regression analysis. Results : 1.The adolescents who have parents with college degree are 70% higher of dental services utilization than the adolescents counterpart(whose parents don't have degrees). And also the adolescents living in cities are 1.3 times higher use of dental services than others living in countries. 2. In case of drinking soda, students having soda 4 days per week on average are 1.2 times higher use of dental services than who don't. 3.The students brushing teeth after lunch are 0.9 times lower use of dental service than who don't. And the students who have tooth ache whenever they have a meal are 1.6 times higher use of dental service than the students who don't have tooth ache. The students who had a dental health education are 1.4 times higher utilization of dental service than who don't. The difference of using dental service between the students who have gum disease and halitosis and the students who don't is almost none. 4. The students who drink alcohol and smoke 10 days more or less a month are 0.8 ~ 0.9 times lower use of dental service than who don't. Conclusions : The rate of utilizing dental service is higher at students who live with parents having college degrees and the more have oral health behavior, the less use of dental service for treatment. We concluded that more educational program should be developed and vitalized so that students can have oral health.

• Food Science and Preservation
• /
• v.12 no.1
• /
• pp.75-79
• /
• 2005

This study was designed to investigate the antioxidant activity of Lespedeza bicolor extract, by measuring electron-donating ability (EDA) using 1,1-diphenyl-2-piciyl hydroxyl (DPPH), superoxide dismutase-like activity (SODA) by pyrogallol, and nitrite-scavenging ability. The EDA of water and ethanol extracts in nitrite-scavenging ability of ethand extract showed the highest values of $82.02\%$ and $75.56\%$, respectively. The SODA increased with the concentations of extract, which was $17.21\~44.08\%$ in ethanol extract $19.89\~29.86\%$ in pressure-water extract and $16.53\~20.0\%$ in water extract respectively. The nitrite-scavenging ability of ethanol extract (pH 1.2, 1000ppm) was $99.53\%$ that was higher than both $85.84\%$ in water extract and $74.72\%$ in pressure-water extract at pH 3.0 was also the highest as $98.20\%$.

• Current Photovoltaic Research
• /
• v.1 no.1
• /
• pp.38-43
• /
• 2013

$Cu(In,Ga)_3Se_5$ is a candidate material for the top cell of $Cu(In,Ga)Se_2$ tandem cells. This phase is often found at the surface of the $Cu(In,Ga)Se_2$ film during $Cu(In,Ga)Se_2$ cell fabrication, and plays a positive role in $Cu(In,Ga)Se_2$ cell performance. However, the exact properties of the $Cu(In,Ga)_3Se_5$ film have not been extensively studied yet. In this work, $Cu(In,Ga)_3Se_5$ films were fabricated on Mo-coated soda-lime glass substrates by a three-stage co-evaporation process. The Cu content in the film was controlled by varying the deposition time of each stage. X-ray diffraction and Raman spectroscopy analyses showed that, even though the stoichiometric Cu/(In+Ga) ratio is 0.25, $Cu(In,Ga)_3Se_5$ is easily formed in a wide range of Cu content as long as the Cu/(In+Ga) ratio is held below 0.5. The optical band gap of $Cu_{0.3}(In_{0.65}Ga_{0.35})_3Se_5$ composition was found to be 1.35eV. As the Cu/(In+Ga) ratio was decreased further below 0.5, the grain size became smaller and the band gap increased. Unlike the $Cu(In,Ga)Se_2$ solar cell, an external supply of Na with $Na_2S$ deposition further increased the cell efficiency of the $Cu(In,Ga)_3Se_5$ solar cell, indicating that more Na is necessary, in addition to the Na supply from the soda lime glass, to suppress deep level defects in the $Cu(In,Ga)_3Se_5$ film. The cell efficiency of $CdS/Cu(In,Ga)_3Se_5$ was improved from 8.8 to 11.2% by incorporating Na with $Na_2S$ deposition on the CIGS film. The fill factor was significantly improved by the Na incorporation, due to a decrease of deep-level defects.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.8
• /
• pp.967-972
• /
• 2006

The antioxidative and antimicrobial activities were determined on the mushroom (Sarcodon aspratus) extracts in order to find out new food functional components. The antioxidative activities of water and ethanol extracts from the Sarcodon aspratus were measured by peroxide values (POV), electron-donating ability (EDA) using 1,1-diphenyl-2-picryl hydroxyl (DPPH), nitrite-scavenging ability and superoxide dismutase-like activity (SODA) by pyrogallol. The antioxidative activity of the ethanol extract measured by POV was higher than those of the water extract, BHT, and ${\alpha}-tocopherol$. The EDA of the water extract and ethanol extract using DPPH showed the highest values of 76.94% and 73.06%, respectively. The nitrite-scavenging abilities (pH 1.2, 1,000 ppm) of the water and ethanol extracts were 72.61% and 62.69%, respectively, and the nitrite-scavenging ability of the water extract was higher than that of the ethanol extract in all pH values. The SODA of the ethanol extract was higher than that of the water extract. The Sarcodon aspratus extracts had antimicrobial effects on Listeria monocytogenes and Staphylococcus aureus.

• Resources Recycling
• /
• v.27 no.2
• /
• pp.38-47
• /
• 2018

Integrated gasification combined cycle (IGCC) is a next generation energy production technology that converts coal into syngas with enhanced power generation efficiency and environmental performance. IGCC produces almost coal gasification slag as the solid by-product. IGCC slag is generated about 140,000 tons for a year although recycling of it is still in the early stages. We evaluated the potential of IGCC slag which is generated from a pilot plant in South Korea as an alkali-activated cement. Samples which were activated with the combined activator of sodium silicate solution and caustic soda had an average compressive strength of 4.5 MPa, showing expansion. Expansion of the alkali-activated slag was presumed to be caused by free CaO in the slag, although it was not detected by the ethylene glycol method. Samples that were activated with the combined activator of sodium aluminate and caustic soda had an average compressive strength of 10 MPa. Hydroxy sodalite and $C_3AH_6$ were found to be the new crystalline phases. IGCC slag can be used as an alkali-activated material, but the strength performance should be improved with proper mix design approach to calculate optimum proportions which can alleviate the expansion issue at the same time.