• Journal of Nutrition and Health
• /
• v.42 no.4
• /
• pp.327-337
• /
• 2009

University students tend to have various dietary problems including undesirable dietary behaviors, inadequate intakes of nutrients and biased habits of liquid consumption. This study was conducted to find dietary behaviors (n = 357) by questionnaire survey and to examine dietary nutrient intakes (n = 60) and liquid consumption (n = 853) by food record method for 3-days among university students attended in K University of Chungnam province in Korea. Most subjects lived in the dormitory or self-boarding house, and they skipped breakfast most frequently and took breakfast most irregularly among three meals. Dietary mean intakes of energy, Ca, vitamin B2 and folate were lower than the KDRI (37-85%), and those of males were poorer than those of females. Ratios of energy intake among three meals and snacks were not distributed evenly, so the mean energy intake from snacks was higher and that from breakfast was lower than the ideal ratio, respectively. Daily mean consumption of liquid was 1,526.4 mL/d for males and 1,151.5 mL/d for females, and these intakes were more than the KDRI (1,300 mL/d for males and 1,100 mL/d for females). However, their sources of liquid consumption were not desirable because alcohol, soda, juice of fruit or vegetable and beverage mixed with fruit juice and/or vegetable juice were major sources of liquid as well as drinking water. These findings show that university students have poor dietary behaviors including frequent skipping of breakfast, irregularity of meals, inadequate intakes of nutrients and undesirable pattersirablliquid consumption including high portion of alcohol and soda as alliquid source, and these trends were stronger for males than for females. Therefore, we should endeavor to correct their meal problems id ated to dietary behaviors, nutrient intakes and liquid consumptions through nutrition education.

• Journal of Conservation Science
• /
• v.18 s.18
• /
• pp.5-18
• /
• 2006

Dujeong-dong site of Cheonan is known as the site of Baekje period in the first half of the fourth century. This study investigated the visible properties and the chemical composition of the 18 pieces of the glass found in the site, and considered scientific properties and periodic interrelationship of the glass on the basis of the analysis result. The observation of the visible properties and microstructure of ancient glass was performed with both an electron microscope and an optical microscope, and the chemical composition was conducted by way of both quantitative and qualitative analysis using Scanning Electron Microscope(SEM) with Energy Dispersive Spectrometer(EDS). In the analysis result, various chemical composition systems are identified in the glass beads of Dujeong-dong site, such as lead-barium, soda and potash glass, and also different shapes were found such as gold foil glass beads, tubular beads, and round beads. It is estimated that the classification of glass by means of its chemical composition was also closely related to the color of glass.

• Korean Journal of Materials Research
• /
• v.26 no.10
• /
• pp.549-555
• /
• 2016

We have investigated a glass-forming region of $V_2O_5-P_2O_5-ZnO$ glass and the effects of the addition of modifier oxides ($B_2O_3$) to the glass systems as a sealing material to improve the adhesion between the glass frits and a soda lime substrate. Thermal properties and coefficient of thermal expansion were measured using a differential scanning calorimetry, a dilatometer and a hot stage microscopy. Structural changes and interfacial reactions between the glass substrate and the glass frit after sintering (at $400^{\circ}C$ for 1 h) were measured by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy and scanning electron microscope. The results showed that the adhesion strength increases as the content of $B_2O_3$ at 5 mol% increases because of changes in the structural properties. It seems that the glass structures change with $B_2O_3$, and the $Si^{4+}$ ions from the substrate are diffused to the sealing glass. From these results, we could understand the mechanism of strengthening of the adhesion of soda lime silica substrate by ion-diffusion from the substrate to the glass.

• Korean Journal of Soil Science and Fertilizer
• /
• v.27 no.4
• /
• pp.290-295
• /
• 1994

Soil $CO_2$ evolution was measured using the soda-lime method for 20-year-old L. tulipifera, P. albaglandulosa, and Q. rubra plantations planted on a similar soil type in the Kwangneung Experimental Forest during the growing season of 1994. Soil $CO_2$ evolution ranged from $0.21g/m^2/hr$ for Q. rubra to $0.33g/m^2/hr$ for L. tulipifera. and was significantly different among species. We found positive correlations between soil $CO_2$ evolution and air(p<0.001, r=0.39) and soil temperatures(p<0.001, r=0.49). Peaks in seasonal soil $CO_2$ evolution occurred in July and August. Seasonal soil $CO_2$evolution did not necessarily follow changes in air and soil temperatures. This study implies that more work is needed to clarify the influence of other factors on soil $CO_2$evolution.

• The korean journal of orthodontics
• /
• v.48 no.1
• /
• pp.48-56
• /
• 2018

Objective: The purpose of this study was to determine the effects of carbonated water on etched or sealed enamel according to the carbonation level and the presence of calcium ions. Methods: Carbonated water with different carbonation levels was manufactured by a soda carbonator. Seventy-five premolar teeth were randomly divided into a control group and 4 experimental groups in accordance with the carbonation level and the presence of calcium ions in the test solutions. After specimen preparation of the Unexposed, Etched, and Sealed enamel subgroups, all the specimens were submerged in each test solution for 15 minutes three times a day during 7 days. Microhardness tests on the Unexposed and Etched enamel subgroups were performed with 10 specimens from each group. Scanning electron microscopy (SEM) tests on the Unexposed, Etched, and Sealed enamel subgroups were performed with 5 specimens from each group. Microhardness changes in different groups were statistically compared using paired t-tests, the Wilcoxon signed rank test, and the Kruskal-Wallis test. Results: The microhardness changes were significantly different between the groups (p = 0.000). The microhardness changes in all experimental groups except Group 3 (low-level carbonated water with calcium ions) were significantly greater than those in the Control group. SEM showed that etched areas of the specimen were affected by carbonated water and the magnitude of destruction varied between groups. Adhesive material was partially removed in groups exposed to carbonated water. Conclusions: Carbonated water has negative effects on etched or sealed enamel, resulting in decreased microhardness and removal of the adhesive material.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.17 no.3
• /
• pp.102-107
• /
• 2007

Dielectric layer of phosphate glass for plasma display panel (PDP) device made by silk screen printing on soda-lime glass. For regulate thermal expansion coefficient (CTE) of between substrate glass and dielectric layer use addition of $Al_2O_3$ and $TiO_2$. The crystallization process of glass-ceramics for dielectric layer have been examined by DTA, XRD some of optical, electrical properties of the dielectric layer were evaluated by UV-spectrometer, dilatometer, impedance analyser. The principal crystalline phase was identified as zinc metaphosphate [$Zn(PO_3)_2$] and zinc pyrophosphate [$Zn_2P_2O_7$]. Reflectance and dielectric constance increased with the addition of $TiO_2$ filler, dielectric constant lower the out side reflectance unchanging of the adding of $Al_2O_3$ filler. Besides CTE was at about $62{\times}10^{-7}/^{\circ}C$.

• Korean Chemical Engineering Research
• /
• v.49 no.2
• /
• pp.195-199
• /
• 2011

Mo thin films were deposited on soda lime glass at room temperature by using DC magnetron sputtering The electrical and structural properties of the films were investigated by varying DC power and gas pressure as the deposition parameter. As DC power increased, the deposition rate of Mo films was increased and the electrical resistivity was decreased. It was observable that the crystallinity of the films was improved with increasing DC power. As gas pressure decreased, the deposition rate and resistivity of the films were decreased, and long rectangular grains were densely formed. With increasing gas pressure, the grains were transformed to a round shape and the voids on the film surface were increased. It was confirmed that the electrical resistivity of Mo films was increased as the amount of oxygen combined with Mo atoms increased. It was also disclosed that the films have low resistivity as the degree of coupling of oxygen with Mo was reduced due to the enhancement of the crystallinity of the films.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.3
• /
• pp.73-77
• /
• 2008

Purpose: This research is that prepare amorphous or crystalline ZnO thin films with pure strong UV emission on soda-lime-silica glass (SLSG) substrates by low-temperature annealing. Methods: Growth characteristic and optical properties of the amorphous or nano-crystalline ZnO thin films prepared on soda - lime - silica glass substrates by chemical solution deposition at 100, 150, 200, 250 and $300^{\circ}C$ were investigated using X-ray diffraction analysis, ultraviolet - visible - near infrared spectrophotometer, and photoluminescence. Results: The films exhibited an amorphous pattern even when finally annealed at $100^{\circ}C{\sim}200^{\circ}C$ for 60 min, while crystalline ZnO was obtained by prefiring at 250 and $300^{\circ}C$. The photoluminescence spectrum of amorphous ZnO films shows a strong NBE emission, while the visible emission is nearly quenched. Conclusions: These results indicate it should be possible to cheaply and easily fabricate ZnO-based optoelectronic devices at low temperature, below $200^{\circ}C$, in the future.

• Journal of Korean society of Dental Hygiene
• /
• v.16 no.6
• /
• pp.849-861
• /
• 2016

Objectives: The purpose of the study was to investigate the relationships among snack habits, oral health practice, and oral health status in preschool children. Methods: The subjects were 209 preschool children and their mothers in Jeonbuk from March 24 to May 30, 2014. The study instruments comprised snack habits, oral health practice, and oral health status. Data were analyzed for independent t-test, one way ANOVA and hierarchical multiple regression using SPSS Win 21.0 version. Results: Higher dft index was shown in the older age (p=0.033), lower mother's education (p<0.001), lower mother's daily toothbrushing (p<0.001), check-up after tooth-brushing (p<0.001), tooth-brushing practice before sleeping (p<0.001), tooth-brushing practice after snack (p<0.001), regular dental check-up (p<0.001), fluoride and sealant for prevention caries (p<0.001), limitation of sugar snack intake (p<0.007), periodic replacement toothbrush (p=0.022). The cause of higher dft index included soda (p<0.001), yogurt (p<0.001), snack (p=0.002), bread and cake (p=0.002) and caramel and candy (p<0.001). Fruit (p<0.001), vegetable (p<0.001) and milk (p=0.004) decreased dft index. Factors affecting oral health status were tooth-brushing practice before sleeping, tooth-brushing practice after snack, regular dental check-up, fluoride and sealant for prevention caries, and intake of soda, yogurt, caramel, candy, and fruit. The explanation power of the final model was 67.6%. Conclusions: It is necessary to develop the oral health education program for the preschool children and mothers to enhance the best oral health condition.

• Applied Chemistry for Engineering
• /
• v.20 no.5
• /
• pp.557-560
• /
• 2009

In this study, a new wet etching method and the solution for thinning the glass with the thickness below $100{\mu}m$ were investigated. For the preparation of etching solution with low hydrofluoric acid, it was effective to use $NH_4F$ or $NH_4HF_2$ as a main ingredient with the addition of sulfuric acid or nitric acid. Influence of the composition of mixed acid solution and the temperature on the etching rate was investigated. The addition of anionic surfactant provides the function to prevent the adhesion of sludge generated by the etching reaction. A new wet etching pilot device equipped with streaming generation parts was used to test etching of commercial non-alkali glass and soda lime glass. The non-alkali glass with the thickness of 640 ${\mu}m$ and soda lime glass with the thickness of $500{\mu}m$ were etched to $45{\mu}m$ and $100{\mu}m$, respectively, by using the pilot device. After the etching by pilot device, the roughness degree of the glass surface was maintained at $0.01{\sim}0.02{\mu}m$.