• Journal of KIISE:Databases
• /
• v.32 no.1
• /
• pp.12-23
• /
• 2005

In the past decade, advances in speed of commodity CPUs have iu out-paced advances in memory latency Main-memory access is therefore increasingly a performance bottleneck for many computer applications, including database systems. To reduce memory access latency, cache memory incorporated in the memory subsystem. but cache memories can reduce the memory latency only when the requested data is found in the cache. This mainly depends on the memory access pattern of the application. At this point, previous research has shown that B+ trees perform much faster than T-trees because B+ trees are more cache conscious than T-trees, and also proposed 'Cache Sensitive B+trees' (CSB. trees) that are more cache conscious than B+trees. The goal of this paper is to make T-trees be cache conscious as CSB-trees. We propose a new index structure called a 'Cache Sensitive T-trees (CST-trees)'. We implemented CST-trees and compared performance of CST-trees with performance of other index structures.

• Journal of Korean Society of Forest Science
• /
• v.101 no.1
• /
• pp.53-61
• /
• 2012

This study developed a growth model for Larix leptolepis based on the WLS model to examine the effects of climate change on them. The site index was chosen as the dependent variable and location, weather, and edaphic factor were chosen as independent variables. Simulations were performed under three A1B climate change scenarios with the temperature ranging from $-3.3^{\circ}C$ to $+3.3^{\circ}C$. The simulation results showed that the site index decreased with peak at $-0.8^{\circ}C$. The decrease level of the site index by region was also analyzed. Each scenario, site index has decreased mostly but some region was increased. When the temperature increased up to $3^{\circ}C$, site index was decreased to everywhere.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.253-253
• /
• 2007

압전 액츄에이터 및 초음파진동자의 응용범위가 넒어짐에 따라 변위량, 응력 등을 개선시키기 위해 전기기계결합계수 kp 및 압전 d상수가 종전보다 큰 재료가 요구되고 있으며, 초음파진동자나 압전 모터와 같이 마찰에 의한 열손실이 많이 발생하는 액츄에이터에 적용할 큰 기계적품질계수롤 가지는 저손실 압전 액츄에이터 및 초음파진동자용 재료가 필요한 실정이다. PZT계 세라믹스는 높은 유전상수와 압전특성으로 전자세라믹스분야에서 가장 널리 사용되어지고 있지만, $1200^{\circ}C$이상의 높은 소결온도 때문에 $1000^{\circ}C$ 부근에서 급격히 휘발되는 PbO로 인한 환경오염과 기본조성의 변화로 인한 압전특성의 저하가 문제시 되고 있다. $Pb(Ni_{1/3}Nb_{2/3})O_3$는 약 $-120^{\circ}C$정도의 큐리온도룰 가지는 강유전체로 Pb(Zr, Ti)$O_3$계 세라믹스에 치환 시 유전상수와 전기기계결합계수를 개선시키는 대표적인 성분이다. 따라서 본 연구에서는 저온소결 저손실의 적층형 압전 액츄에이터를 개발하기 위해 PMS-PMN-PZT계 세라믹스에 $Pb(Ni_{1/3}Nb_{2/3})O_3$ 세라믹스를 치환하고 $Li_2CO_3$와 $Na_2CO_3$ ZnO를 소결조재로 사용하여 저온소결 하였으며 PNN 치환량에 따른 결과를 관찰 하였다.

• The Journal of the Korea Contents Association
• /
• v.15 no.10
• /
• pp.346-353
• /
• 2015

The purpose of this study the following changes in the body composition and obesity-stress on the aerobic exercise and combined exercise and that Obesity Management Exercise Program was conducted to serve as the basis when developing materials. Obesity female college student 40 people were classified that Aerobic exercise group(20 patients) and combined exercise group(20 patients). Every time 60 minutes, three times a week, a total of eight weeks each exercise program after each underwent an exercise program compared body composition and stress. Research result, body fat is aerobic exercise group and combined exercise group was statistically decrease, Obesity Stress is founded that a significantly reduction in the combined exercise group. Therefore Obesity Management Exercise Program during development in considering the combined exercise group Obesity Stress is thought to be more suitable.

• The Journal of the Korea Contents Association
• /
• v.15 no.10
• /
• pp.336-345
• /
• 2015

This study conducted the following experiment to examine change of biophysical and physical fitness function on combined exercise program in 20' female university students with obesity according to heights of insole. Obesity related biophysical function was measured by basal metabolism and percent body fat(% Fat) and health related physical fitness was measured by isokinetic strength of quadriceps femoris muscle, muscular endurance, flexibility and power on comparative analysis of pre, post exercise and each groups(0cm, 5cm, 9cm) in 36 female university students with obesity subject according to heights of insole. These result lead us to the conclusion that each group were statistically improved at isokinetic muscular strength of quadriceps femoris muscle and basal metabolism, but 5cm group compared with 0cm and 9cm group was more significant improvement. Consequently, combination exercise applying appropriate heights of insole would be lead to positive increment of muscular strength and basal metabolism.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.9
• /
• pp.19-26
• /
• 2018

The focus of this study was centered around 15 common injection type water leakage repair materials (3 different types for each; synthetic polymer, cementitious, acrylic, epoxy, urethane) used in concrete structures of Korea and analyzing their wet surface adhesion performance in accordance to the ISO TS 16774 Test Method for Repair Materials for Water-leakage Cracks in Underground Concrete Structures, Part 4: Test Method for Adhesion on Wet Concrete Surface, and the results of this study was taken to be place under a comparative analysis with the results of the preceeding study on response to substrate movement performance study. The results of this comparative study showed that other than 1 specimen of 1 type of the acrylic and 3 specimens of 1 type of the synthetic polymer type materials, all of the 93% of the specimens used in this study showed stable adhesion on wet substrate surface, and we were able to determine that materials that have proper response properties against substrate movement are highly flexible and have high adhesion properties, but their adhesion properties on wet substrate would change based on their viscosity.

• Korean Journal of Metals and Materials
• /
• v.49 no.2
• /
• pp.161-166
• /
• 2011

The aim of this study was to determine the effect of high-energy mechanical milling (HEMM) time and sintering temperature on microstructure and mechanical properties of the TiAl composite fabricated by pulse current activated sintering. TiAl intermetallic powders were milled by HEMM for 1h, 4h, and 8h respectively. Thermal analysis was used to observe the phase transformation of the milled TiAl powders. The sintering time decreased with increase of milling time. The hardness and fracture toughness of the sintered specimens also was improved with increasing milling time. The grain size of the sintered specimens which was milled for 4h was in the range of 50~100 nm.

• Journal of Practical Engineering Education
• /
• v.16 no.1_spc
• /
• pp.51-58
• /
• 2024

This paper examines the differences between the Korean and American stock markets using the Kospi and S&P 500 indices and discusses policy implications through them. To this end, in addition to the existing time series analysis method, a deep learning method was used to compare markets, and the comparison was made in terms of stock price forecasting ability and data generation ability. In monthly data, the difference between time series was not large, and in daily data, the difference in terms of stability was weak, and there was no significant difference in predictive power or simulation data generation. As shown in the results of this study, if there is not much difference in market price movement patterns between Korea and the United States, tax benefits for long-term stocks investment will be effective against the side effects of short selling.

• Journal of Forest and Environmental Science
• /
• v.35 no.4
• /
• pp.248-257
• /
• 2019

We chose the Mt. Dalum area (located in Gijang-gun, Busan, Korea) for our survey, particularly The pine wilt disease zone and the non-permanent control area. This study investigates the effect of pine wilt disease on the distribution of beetle species in the process of ecosystem change due to insect control; pine forests treated for pine wilt disease were divided into insect control and non-control sites, respectively. The results of this study are as follows. Twen tyseven species belongs to 12 families were identified from 969 ground beetles collected from this sites. Species richness was the highest in Coleoptera (6 species, 469 individuals). In the control site, 21 species belongs to 10 families were identified from 228 individuals, while 24 species of 11 families from 533 individuals in the non-control area. The highest number of species were noted in June and July from the non- control and control sites, respectively. The highest number of insects in control and non-control sites was observed in July, while the lowest in September. Sipalinus gigas gigas, Spondylis buprestoides, Plesiophthalmus davidis, Calosoma maximowiczi, Damaster jankowskii jankowskii, and Damaster smaragdinus were captured in both study sites. Episomustur ntus and Glischrochilus ipsoides were only captured in the control site, while Macrodorcas rectus rectus and Pheropsophus javanus were only captured in the non-control site. Six beetles and five species (such as Calosoma maximowiczi) were found in the control site and six species (including Damaster smaragdinus) in the non-control site. The species distributions by altitude were 163, 518, and 258 individuals, at 100, 200 and 300 m sites, respectively. The diversity, evenness, and dominance indices in the control area were 0.764, 0.812, and 0.367, respectively. The diversity, evenness, and dominance indices in the non-control area were 0.927, 0.837, and 0.352, respectively. The similarity index between the control and non-control area was 80%.

• Research in Plant Disease
• /
• v.8 no.3
• /
• pp.166-170
• /
• 2002

Powdery mildew of mug bean was found in Suwon on September 2000. Many white and powdery mycelial colonies appeared on leaves of the plants. Conidia with fibrosin bodies were ellipsoid to elongate-ellipsoid, 25~38$\times$16~22 ${\mu}{\textrm}{m}$ in size and farmed in chains. Conidiophores were erect on superfical mycelium, 67~100 ${\mu}{\textrm}{m}$ in length. Foot cells were cylindric with 37~65$\times$10~11 ${\mu}{\textrm}{m}$ in size. Appressoria were indisdinct. Germ tubes from conidia were simple, not branched. Dark brown cleistothecia were observed on the leaves of mung bean. Cleisto-thecia were globose or subglobose, 85~1130 ${\mu}{\textrm}{m}$ in size. Wall cells were irregularly polygonal with 15~45$\times$7~26 ${\mu}{\textrm}{m}$. Appendages were mycelioid, 6-11 per ascocarp, coloured, throught when mature or paler upwards, 1~7 septa, 192~223$\times$5~7 ${\mu}{\textrm}{m}$ in size. A single sun had in a cleistothecium and was ovoid or subglobose with 62~95$\times$50~67 ${\mu}{\textrm}{m}$ in size. Ascusspore had 8 spores in an ascus and rarely developed, mostly imatuna ellipsoid-ovoid with 16~24$\times$12~16 ${\mu}{\textrm}{m}$. On the basis of morphological characters of the conidial stage and teleo-morph, the fungus was identified as Sphaerotheca phaseoli.