• Journal of the Korean Data and Information Science Society
• /
• 제28권3호
• /
• pp.709-720
• /
• 2017

In healthcare and medical research, many important variables have a measurement error such as body mass index and laboratory data. It is also not easy to collect samples of large size because of high cost and long time required to collect the target patient satisfied with inclusion and exclusion criteria. Beside, the demand for solving a complex scientific problem has highly increased so that a semiparametric regression approach could be of substantial value solving this problem. To address the issues of measurement error, small domain and a scientific complexity, we conduct a multivariable Bayesian smoothing under structural measurement error covariate in this article. Specifically we enhance our previous model by incorporating other useful auxiliary covariates free of measurement error. For the regression spline, we use a radial basis functions with fixed knots for the measurement error covariate. We organize a fully Bayesian approach to fit the model and estimate parameters using Markov chain Monte Carlo. Simulation results represent that the method performs well. We illustrate the results using a national survey data for application.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.1015-1016
• /
• 2006

The important parameters deciding the fluctuation of Accumulation style surgical operation of ventriculus laser beam are smoothing capacitor, frequency and he characteristics of laser resonator. In this thesis, we control the fluctuation of medical $CO_2C$ laser in realtime by changing Duty-Ratio of IGBT and switching frequency with fixed the smoothing capacitor to improve the fluctuation of laser beam. We detect the light on laser resonator using a CdS photo sensor to improve ripple factor of laser beam and feedback fluctuated signals refined by a band pass filter into the control circuit to stabilize fluctuation actively. There is much to be desired in the realtime controlling technique of the light on Accumulation style surgical operation of ventriculus laser discharge tube in electrical signal. We propose switching control technique with microprocessor and photo sensing technique by controlling switch devices optimum operation and feedback signals detected by a photo sensor into the laser power supply in order to improve ripple factor of the $CO_2$ laser beam.

• Imaging Science in Dentistry
• /
• 제50권2호
• /
• pp.153-159
• /
• 2020

Purpose: This study was conducted evaluate the influence of reconstruction parameters of micro-computed tomography (micro-CT) images on bone mineral density (BMD) analyses. Materials and Methods: The sample consisted of micro-CT images of the maxillae of 5 Wistar rats, acquired using a SkyScan 1174 unit (Bruker, Kontich, Belgium). Each acquisition was reconstructed following the manufacturer's recommendations(standard protocol; SP) for the application of artifact correction tools(beam hardening correction [BHC], 45%; smoothing filter, degree 2; and ring artifact correction [RAC], level 5). Additionally, images were reconstructed with 36 protocols combining different settings of artifact correction tools (P0 to P35). BMD analysis was performed for each reconstructed image. The BMD values obtained for each protocol were compared to those obtained using the SP through repeated-measures analysis of variance with the Dunnett post hoc test(α=0.05). Results: The BMD values obtained from all protocols that used a BHC of 45% did not significantly differ from those obtained using the SP (P>0.05). The other protocols all yielded significantly different BMD values from the SP(P<0.05). The smoothing and RAC tools did not affect BMD values. Conclusion: BMD values measured on micro-CT images were influenced by the BHC level. Higher levels of BHC induced higher values of BMD.

• 한국항해항만학회지
• /
• 제40권5호
• /
• pp.241-247
• /
• 2016

The tracking filter plays a key role in the accurate estimation and prediction of maneuvering a vessel's position and velocity when attempting to enhance safety by avoiding collision. Therefore, in order to achieve accurate estimation and prediction, many oceangoing vessels are equipped with the Automatic Radar Plotting Aid (ARPA) system. However, the accuracy of prediction depends on the tracking filter's ability to reduce noise and maintain a stable transient response. The purpose of this paper is to derive the optimal values of the gain parameters used in tracking a High Dynamic Warship. The algorithm employs a ${\alpha}-{\beta}-{\gamma}$ filter to provide accurate estimates and updates of the state variables, that is, positions, velocity and acceleration of the high dynamic warship based on previously observed values. In this study, the filtering coefficients ${\alpha}$, ${\beta}$ and ${\gamma}$ are determined from set values of the damping parameter, ${\xi}$. Optimization of the damping parameter, ${\xi}$, is achieved experimentally by plotting the residual error against different values of the damping parameter to determine the least value of the damping parameter that results in the optimum smoothing coefficients leading to a reduction in the noise corruption effect. Further investigation of the performance of the filter indicates that optimal smoothing coefficients depend on the initial and average velocity of the target.

• 한국측량학회지
• /
• 제37권6호
• /
• pp.555-562
• /
• 2019

본 논문에서는 근접 사진측량에 기반하여 모형 토조 내 지반의 변위를 측정하기 위한 연구를 진행하였다. 알루미늄 프레임 및 투명 아크릴로 제작된 실내 모형 토조 내에 토사를 채워 넣고, 하중 재하 장치를 이용한 하중 재하를 통한 토사의 변위를 사진측량 기법으로 측정하였다. 토조 내의 토사는 영상 기반 자동 매칭을 위하여 검은 모래 약 40%, 일반 모래 약 60% 혼합하여 영상 대비의 정도를 높일 수 있도록 계획하였다. 전처리 과정으로서 실험실 카메라 캘리브레이션을 통해 내부표정요소를 도출하였고, 토조 프레임에 배치된 기준점을 이용한 후방교회법을 통해 외부표정요소를 예측하였다. 이후 영상 매칭을 통해 하중 전, 후의 토사 변위 패턴을 측정하였으며, 영상 매칭 시 활용되는 매칭 윈도우 크기 및 영상 스무딩 정도를 변경 적용하여 그 결과를 평가해보았다. 실험 결과, 매칭 윈도우 크기 65×65픽셀의 경우 안정적인 변위 도출이 가능하였으며, 영상 스무딩은 매칭의 과대 오차를 감소하는 효과를 보여주었다. 이를 통해 사진 측량을 통한 토조 내 지반 변위 패턴을 도출할 수 있었다.

• 한국산학기술학회논문지
• /
• 제15권2호
• /
• pp.1020-1026
• /
• 2014

슬라이딩모드 제어의 문제는 제어입력에 포함된 알려지지 않은 외란 등 비선형 입력으로 인한 채터링의 발생이다. 본 연구는 채터링 발생의 문제를 해결하기 위한 제어 알고리듬에 대하여 고찰하고 채터링을 억제하는 슬라이딩모드 제어기를 설계하고자 한다. 슬라이딩모드 제어 시 발생하는 채터링을 억제하기 위해 알려지지 않은 외란을 포함한 비선형 입력에 대하여 평활함수를 적용한다. 이 방법에 의하여 도립진자 시스템의 동적 방정식에 포함된 비선형 요소와 외란에 의한 문제가 해결될 수 있음을 보인다. 또 슬라이딩모드 제어를 위한 제어 입력을 시스템에 적용하였고, 제안한 제어기의 제어성능을 검증하기 위하여 도립진자를 대상으로 컴퓨터 모의실험을 수행하였다. 모의실험 결과 제어입력에 포함된 큰 폭의 채터링이 제거되었음을 확인할 수 있다.

• 한국정밀공학회지
• /
• 제31권8호
• /
• pp.721-728
• /
• 2014

In this paper, it is proposed a method of optimizing path parameters for large-area laser processing. On-the-fly system is necessary for large-area laser processing of uniform quality. It is developed a MOTF(Marking On-The-Fly) board for synchronizing the stage and scanner. And it is introduced the change of the error due to the change of parameters and algorithm for large-area laser processing. This algorithm automatically generates stage path and a velocity profile using acceleration and deceleration parameters. Since this method doesn't use a G-code, even if without expert knowledge, it has an advantage that can be accessed easily. Angle of one of the square of $350{\times}350mm$ was changed from $50^{\circ}$ to $80^{\circ}$ and analyzed the error corresponding to the value of Ta. It is calculated the value of Ta of the best with a precision of 20um through measurement of accuracy according to the Ta of each angle near the edge.

• 산업경영시스템학회지
• /
• 제20권41호
• /
• pp.157-166
• /
• 1997

Classical SPC charting methods such as (equation omitted), R, S charts assume high volume manufacturing processes where at least 25 or 30 calibrate samples of size 4 or 5 each can be gathered to estimate the process parameters before on-line charting actually begines. However, for many processes, especially in a job-shop setting, production runs are not necessarily long and charting technique are required that do not that depend upon knowing the process parameters in advance of the run. In this paper, using modifying statistics, we give a method for constructing control charts for the process mean when the measurements are from a normal distribution. In this case, consider that smaller weight being assigned to the older data as time process and properties and taking method of exponential smoothing constant$(\lambda)$ are suggested.

• 대한기계학회논문집A
• /
• 제27권10호
• /
• pp.1738-1747
• /
• 2003

Smoothed Particle Hydrodynamics (SPH), a pure Lagrangian numerical method, is applied to analysis of penetration phenomenon of bumper plate which is installed outside of spacecraft hull to protect the spacecraft against hypervelocity meteorite impact. Effects of SPH parameters, such as artificial viscosities, smoothing lengths, numbers of particles and time increments, are analysed by comparing the SPH simulation results with experimental ones with regard to subsequent formation of debris cloud. An optimum range of parameter values is determined by error analysis and various SPH numerical results are compared with experiments.

• 산업경영시스템학회지
• /
• 제19권37호
• /
• pp.31-40
• /
• 1996

The amount of safety stock is decided from various information such as the forecasted demand, the lead time, the size of the order quantity and the desired service level. There are two cases to consider the problem of setting safety stock when both the demand in a period and the lead time are characterized as random variables: the first case is the parameters of the demand and lead time distributions are known, the second case is they are unknown and must be estimated. The objective of this study is to present the procedure for setting safety stocks in the case the parameters of the demand and lead time distributions are unknown and must be estimated. In this study, a simple exponential smoothing model is used. to generate the estimates of demand in each period and a discrete distribution of the lead time is developed from historical data, and the optimal service level is used which determined to consider both of a backorder and lost sale.