• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.159-162
• /
• 2008

This paper presents a modified mean curvature diffusion filter to smooth speckle noise in images. Mean curvature diffusion filter has already shown good results in reducing noise in images while preserving fine details. In the mean curvature diffusion, the rate of smoothing is controlled by the local value of the diffusion coefficient chosen to be a function of the local image gradient magnitude. In this paper, the diffusion coefficient is modified to be controlled adaptively by local image surface slope and heterogeneity. The local surface slope contributes to preserving details (e.g.edges) in image and the local surface heterogeneity helps the smoothing filter consider the amount of noise in both edge and non-edge area. The proposed filter's performance is demonstrated by quantitative experiments using speckle noised aerial image and TerraSAR-X satellite image.

• Korean Journal of Optics and Photonics
• /
• v.5 no.2
• /
• pp.217-224
• /
• 1994

The combination of both phase-shifting convolution and 2-bit quantization smoothing filter was used to reduce speckle noise from saw-tooth speckle fringes phase map, obtained in phase-shifting speckle interferometer. The phase-shifting convolution showed the noise reduction capability of speckle fringe without destroying edge information across 271 jump. Also, it was shown that the 2-bit quantization smoothing filter was superior to average, low-pass filter and median filter in speeding up smoothing process and enhancing SIN ratio. Finally, a path dependent unwrapping algorithm was used to unwrap a noise reduced 271 modulo speckle phasemap. semap.

• Journal of IKEEE
• /
• v.19 no.2
• /
• pp.244-253
• /
• 2015

Please This paper presents method of video stabilization based on detection and adaptive motion smoothing filtering of undesirable motion. The proposed algorithm consists of two stages: the detection of undesirable motion and smoothing filtering of detected undesired motion. To incorporate desired properties into the motion smoothing process, the local maximum and the local minimum are defined in a set composed of the parameters of accumulative global motion. Using the local information, the constraints on detecting undesirable motions are defined. Based on these constraints, the alpha parameter of the alpha-trimmed means filter is adjusted, so that the degree of motion smoothing in the reconstructed video sequence is controlled. The experimental results demonstrated the capability of the proposed algorithm.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.10a
• /
• pp.95-98
• /
• 2001

Edge detection is an important problem in computer vision and image understanding. Because the threshold is difficult to properly determine, edge images gained by the usually gradient-based segmentation methods are often tend to have many disjoint or overlapping boundaries, which makes the edge images spinous. In this paper, a practical multilevel morphological filter is presented for smoothing spinous edge images. The experimental results show that the method is effective in dealing with the images of a target in the sky.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.457-462
• /
• 1990

Lately, at an epock of full-scale satellite ranching plan of Korea, T.T.C (Tracking, Telemetery & Command) is a indispensable part. In this paper, particular attention is given to orbit determination problem of role of T.T.C. Orbit determination, which is applied to Kalman Filter and Smoothing Filter, use the observation data which is given by satellite tracking radar system, and then the simulation is accomplished. As a result, it shows effectiveness.

• MALSORI
• /
• no.67
• /
• pp.195-216
• /
• 2008

This paper addresses the problem of single-channel speech separation to extract the speech signal uttered by the speaker of interest from a mixture of speech signals. We propose to apply time-frequency smoothing to the existing statistical single-channel speech separation algorithms: The soft mask and the minimum-mean-square-error (MMSE) algorithms. In the proposed method, we use the two smoothing later. One is the uniform mask filter whose filter length is uniform at the time-Sequency domain, and the other is the met-scale filter whose filter length is met-scaled at the time domain. In our speech separation experiments, the uniform mask filter improves speaker-to-interference ratio (SIR) by 2.1dB and 1dB for the soft mask algorithm and the MMSE algorithm, respectively, whereas the mel-scale filter achieves 1.1dB and 0.8dB for the same algorithms.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.12
• /
• pp.2535-2540
• /
• 2002

ESPI is a noncontact, nondestructive and relatively fast inspection method. For these reasons ESPI is being applied as a valuable tool in the nondestructive evaluation of structural components. Phase shifting ESPI is used more effectively than the traditional ESPI because spatial resolution of small object displacements are improved and numerical phase values are obtained for all pixels in the image. Consequently the quantitative measurement of deformation is possible. ESPI fringe patterns are contaminated with high levels of speckle noise. Therefore the phase image is to be smoothed to remove the noise and obtain a better signal-to-noise ratio. In this study, smoothing is done by phase shifting convolution to avoid smoothing errors close to the 2$\pi$ phase ambiguities in the deformation phase image, and median filter is used as a smoothing filter.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.697-698
• /
• 2006

In this paper, we propose a new scheme to generate multi-view images using a depth-image-based rendering (DIBR) technique. In order to improve the quality of multi-view images at newly exposed areas during mesh-based rendering, we preprocess the depth map using a Gaussian smoothing filter. Previous algorithms apply a smoothing filter to the whole depth map even if the depth map is collapsed. After extracting objects from the depth map, we apply the smoothing filter to their boundaries. Finally, we cannot only maintain the depth quality, but also generate high quality multi-view images. Experimental results show that our proposed algorithm outperforms previous works and supports an efficient depth keying technique.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.2
• /
• pp.179-186
• /
• 2015

In the indoor location estimation system, which has recently been actively studied, the received signal strength indicator contains a high level of noise when measuring the signal strength in the range between two nodes consisting of a receiver and a transceiver. To minimize the noise level, this paper proposes an improved adaptive smoothing filter that provides different exponential weights to the current value and previous averaged one of the data that were obtained from the nodes, because the characteristic signal attenuation of the received signal strength indicator generally has a log distribution. The proposed method can effectively decrease the noise level by using a feedback filter that can provide different weights according to the noise level of the obtained data and thus increase the accuracy in the distance and location without an additional filter such as the link quality indicator, which can verify the communication quality state to decrease the range errors in the indoor location recognition using ZigBee based on IEEE 802.15.4. For verifying the performance of the proposed improved adaptive smoothing filter, actual experiments are conducted in three indoor locations of different spatial sections. From the experimental results, it is verified that the proposed technique is superior to other techniques in range measurement.

• Spatial Information Research
• /
• v.2 no.2
• /
• pp.189-196
• /
• 1994

Adaptive smoothing filter is a filter that averages out the intensities around the pixels of similar intensities while conserving the discontinuties. When human eyes rec-ognize a map, the brain can easily assign one color for each element such as road or building while computer distinguishes all the minute color differences even for one ele¬ment. We can approach to the solution by using the adaptive smoothing filter so that the machine can assign one color for each element as much as we want, and it is found to be a very essential tool foor map segmentation of urban areas. The filter is applied to a scanned map, and it is used to extract roads and residential areas.