• 한국멀티미디어학회논문지
• /
• 제17권4호
• /
• pp.466-477
• /
• 2014

Many image hiding schemes based on least significant bit (LSB) transformation have been proposed. One of the LSB-based image hiding schemes that employs diamond encoding was proposed in 2008. In this scheme, the binary secret data is converted into base n representation, and the converted secret data is concealed in the cover image. Here, we show that this scheme has two vulnerabilities: noticeable spots in the stego-image, i.e., a non-smooth embedding result, and inefficiency caused by rough re-adjustment of falling-off-boundary value and impractical base translation. Moreover, we propose a new scheme that is efficient and produces a smooth and high quality embedding result by restricting n to power of 2 and using a sophisticated re-adjustment procedure. Our experimental results show that our scheme yields high quality stego-images and is secure against RS detection attack.

• Structural Engineering and Mechanics
• /
• 제33권6호
• /
• pp.747-763
• /
• 2009

In this work, the linear vibration characteristics of $90^{\circ}$ pipe bends and their cylindrical and toroidal shell components are studied. The finite element method, based on shear-deformation shell elements, is used to carry out a vibration analysis of metallic multiple $90^{\circ}$ mitred pipe bends. Single, double, and triple mitred bends are considered, as well as a smooth bend. Sample natural frequencies and mode shapes are given. To validate the procedure, comparison of the natural frequencies is made with existing results for cylindrical and toroidal shells. The influence of the multiplicity of the bend, the boundary conditions, and the various geometric parameters on the natural frequency is described. The differential quadrature method, based on classical shell theory, is used to study the vibration of components of these bends. Regression formulas are derived for cylindrical shells (straight pipes) with one or two oblique edges, and for sectorial toroidal shells (curved pipes, pipe elbows). Two types of support are considered for each case. The results given provide information about the vibration characteristics of pipe bends over a wide range of the geometric parameters.

• 한국정밀공학회지
• /
• 제12권2호
• /
• pp.112-122
• /
• 1995

While many surfaces such as automobile outer panels, ship hulls and airfoils are characterized by their smooth, free-form shapes, a far larger class of functional surfaces are characterized by highly irregular, multi-featured shapes consisting of pockets, channels, ribs, etc. In constaract to the design of aesthetic, free-form surfaces, functional surface design can perhaps best be viewed as a process of assembling a collection of known component surfaces to form a single compound surface. In this paper, we presents a feature-based functional surface modeling method. A single feature involves a secondary surface, which we must join to a primary surface with a smooth transition between two boundary courves. Through recursive blending of a secondary surface with the primary surface, the mullti-featured surface is represented. After constructing a compound surface, we generate the Z-map for NC machining of the surface. Offsetting the Z-map using the inverse offsetting technique, we get CL tool paths with out gouging.

• 기술경영경제학회:학술대회논문집
• /
• 기술경영경제학회 1996년도 제10회 동계학술발표회 논문집
• /
• pp.241-264
• /
• 1996

This article introduces the five functions of the national innovation system (NIS). As the national innovation system is a kind of social systems in the national level, the five generic functions of open system-production boundary spanning, maintenance, adaptation management functions-are applied to the NIS. The production function is the primary process, which produces innovative products and services of the NIS. The boundary spanning function is the function of procuring the input and disposing the innovation output or aiding in these process. Experienced R&D human resources, R&D funds, technology etc. belong to the input of the NIS. The maintenance function is responsible for the smooth operation and upkeep of the system in terms of various conditions. The adaptive function is to help the system change and adapt, scan the environment for problems, opportunities, and technological developments. It faces outward for the survival of the system from the long-term view. The management function carries out planning and controlling the overall activities for the other four functions in order to run the system. Finally it discuses implications for the diagnosis and the decision making process of S&T policy.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 2000년도 Proceedings of 2000 International Nano Crystals/Ceramics Forum and International Symposium on Intermaterials
• /
• pp.165-177
• /
• 2000

Ceramic on ceramic total hip prostheses are developed to apply to young patients because lifetime of polyethylene joint prostheses is limited by loosening due to biological response. As mating faces of all-ceramic joint must be highly conformed to reduce stress concentration, wear properties of flat surfaces are investigated in this study. Through wear tests at 2 MPa of contact pressure and 36 mm/s of sliding velocity, alumina and silicon carbide keep low wear rate, high hardness and smooth surface. Soft surface film was detected after the test in bovine serum. This suggests that boundary lubrication is effective to reduce wear in all-ceramic joint.

• 대한수학회보
• /
• 제57권5호
• /
• pp.1241-1249
• /
• 2020

Let Ω be a domain in ℂⁿ. Suppose that ∂Ω is smooth pseudoconvex of D'Angelo finite type near a boundary point ξ₀ ∈ ∂Ω and the Levi form has corank at most 1 at ξ₀. Our goal is to show that if the squeezing function s_Ω(𝜂_j) tends to 1 or the Fridman invariant h_Ω(𝜂_j) tends to 0 for some sequence {𝜂_j} ⊂ Ω converging to ξ₀, then this point must be strongly pseudoconvex.

• 소음진동
• /
• 제11권2호
• /
• pp.226-233
• /
• 2001

It is essential to analyze structural vibrations due to turbulent wall pressure fluctuations over a body surface which moves through a fluid, because the vibrations can be a severe source of noise affecting to passengers in airplanes and SONAR performance. Generally, this kind of problems have been solved for very simplified models, e.g. plates, which can be applied to the wavenumber domain analysis. In this paper, a finite element modeling of the walt pressure fluctuations is investigated, which can be applied to those over arbitrary smooth surfaces. It is found that the modeled wall pressure fluctuation at nodes becomes uncorrelated at higher frequencies and at lower flow speeds, and the response is over-estimated due to the aliased power. Then the frequency range available for uncorrelated loading model and two power correction schemes are presented.

• Wind and Structures
• /
• 제5권2_3_4호
• /
• pp.347-358
• /
• 2002

Mean surface pressures and overall wind loads on hemispherical domes immersed in a boundary layer were obtained by numerical simulation. The effects of alternative turbulence models, Reynolds Number and surface roughness were examined and compared with earlier studies. Surface pressures on dual hemispherical domes were also calculated for three wind orientations ($0^{\circ}$, $45^{\circ}$, and $90^{\circ}$) to evaluate flow field interactions. Calculated values were compared to wind-tunnel measurements made in equivalent flow conditions.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.817-824
• /
• 2000

It is essential to analyze structural vibrations due to turbulent wall pressure fluctuations over a body surface which moves through a fluid, because the vibrations can be a severe source of noise affecting to passengers in airplanes and SONAR performance. Generally, this kind of problems have been solved for very simplified models, e.g. plates, which can be applied to the wavenumber domain analysis. In this paper, a finite element modeling of the wall pressure fluctuations over arbitrary smooth surfaces is investigated. It is found that the modeled wall pressure fluctuation at nodes becomes uncorrelated at higher frequencies and at lower flow speeds, and the response is over-estimated due to the aliased power. Finally, the frequency range available for uncorrelated loading model and two power correction schemes are presented.

• Journal of Welding and Joining
• /
• 제18권4호
• /
• pp.104-110
• /
• 2000

An integral equation representation of cracks was presented, which differs from well-known "dislocation layer" representation. In this new representation, an integral equation representation of cracks was developed and coupled to the direct boundary-element method for treatment of cracks in plane finite bodies. The method was developed for in-plane (modes I and II) loadings only. In this paper, the method is formulated and applied to mode III problems involving smooth or kinked cracks in finite region. The results are compared to exact solutions where available and the method is shown to be very accurate despite of its simplicity.implicity.