• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.8
• /
• pp.90-97
• /
• 2013

In recent years, the many electric saving methods are studied because of difficulty of meeting the demand. The electric energy management such as monitoring of branch power consumption, demand control, metering, power quality monitoring, electric safety monitoring can make energy saving. The purpose of this paper is to develop a system which can provide the integrated management of various functions required for energy management by consumers. In this system all functions which were embodied into each devices are integrated into intelligent meter. The developed systems are tested and implemented by installing at consumer electric distribution panel.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.13-19
• /
• 2014

Improvement of performances of potable communication devices such as laptops, tablets, and smart-phones enables people to do group meetings in any place. However, even though group members in a meeting locate close, data or information to be shared in the group are exchanged through the cellular networks. This increases unnecessary traffic loads in the wireless/backbone networks and as consequence it increase delays in communications. To resolve the problem, an android-based application is developed in this paper. The application utilizes Wi-Fi Direct so that all members in the meeting can direct exchange materials for the meeting without using cellular networks.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.7
• /
• pp.1161-1168
• /
• 2016

Battery energy storage system(BESS) attract the attention of the power system operators with its fast response to a disturbance in spite of its limited energy capacity. This paper proposes the operating method of BESS for following the Automatic Generation Control(AGC) frequency control which is centrally distributed by a system operator. As BESS needs to just meet the control requirement from the system operator, it should be able to properly manage the state of charge(SOC) of BESS to be available to control signal. For doing these, the proposed method distributes the control requirement to available batteries in proportion to its SOC. In addition, unavailable batteries are controlled to recover the SOC to an appropriate range, and the recovering power is supplied by available batteries meeting the control requirement. Moreover, the proposed method manages the efficiency of power conversion system (PCS) by limiting the number of PCS to be assigned for the low control requirement. Finally, the case studies are carried out to verify the effectiveness of proposed strategy.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.677-684
• /
• 2009

With various sensor network and ubiquitous technologies, we can extend interaction area from a virtual domain to physical space domain. This spatial interaction is differ in that traditional interaction is mainly processed by direct interaction with the computer machine which is a target machine or provides interaction tools and the spatial interaction is performed indirectly between users with smart interaction tools and many distributed components of space. So, this interaction gives methods to users to control whole manageable space components by registering and recognizing objects. Finally, this paper provides an effective spatial interaction method with template-based task mapping algorithm which is sorted by historical interaction data for support of users' intended task. And then, we analyze how much the system performance would be improved with the task mapping algorithm and conclude with an introduction of a GUI method to visualize results of spatial interaction.

• International journal of advanced smart convergence
• /
• v.9 no.3
• /
• pp.145-152
• /
• 2020

When conducting a health screening, it is important to select the most appropriate hospitals for the screening items. There are various packages in the screening hospitals, and the screening items and price are very different for each package. In this paper, we provide a method of recommending the screening packages in consideration of the customer's preferences such as screening items and minimum matching ratio. First, after collecting package information of hospitals, information such as basic items and optional items in the package are extracted. Then, we determine whether the client's screening items exist in the basic item or optional item of the package and calculate the matching rate of the package. Finally, we recommend screening packages with the lowest price while meeting the minimum matching rate suggested by the client. For performance analysis, we implement a prototype for recommending screening packages and provide the experimental results. The performance analysis shows that the proposed approach provides a real-time response time and recommends appropriate packages.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.229-234
• /
• 2008

The new millennium has started with several innovations driven by fast evolution of the technologies in energy sector. A strong impulse towards the diffusion of new economical efficient technologies regulatory incentives related to energy production from renewable source and a small scale building trigeneration and to promotion of more sustainable environmental-friendly generation solutions, the evolution of electricity markets, more and more binding local emission constraints, and the need for improving the security of supply to reduce the energy system vulnerability. The 24 percentage energy quantify of total energy consumption consumes in commercial buildings and residential houses and the 30% portion of total $CO_2$ emissions covers also in the commercial buildings and residential houses sector. To cope with efficiently this energy sinuation in building sector, Building microgrid or building tooling, heating & power(BCHP) system has been interested in recent day due to meeting thermal and electric energy requirements efficiently and with appropriate energy quality. A multi agent system is a collective of intelligent agents that communicate with each other and work cooperatively to achieve common goals. Also, it is to medicate and coordinate communication between Control Areas and Security Coordinators for teal-time control of the BCHP system and the power pid. In this new circumstance, it is very important to integrate the power and energy delivery system and the information system(communication, networks, and intelligent equipment) that controls it. Therefore, development of smart control modules with open communication protocol and seamlessly interchange the data and information between control network and data network including extranet and intranet give a great meanings. We designed and developed the TCP/IP-CAN IED agent modules and ModBus./LonTalk/(TCP/IP) IED agent ones to configure the multi-agent system based smart energy network of commercial buildings and also intelligent algorithms for inverter fault diagnostics which ran be operated in control level or agent level network.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.15 no.4
• /
• pp.51-62
• /
• 2019

Recently, as the number of Smart Phone users increase, the simple payment system has been able to make payments using only card information such as a registered password without extra authorized certificate authentication or input of card information. In this paper, it will examine and analyze simple payment system provided by IT companies and financial institutions and the simple payment system that operates global online payment system by case view of operational direction. Then with this examination, it will study ways to improve the problems with terms of convenience and stability in terms of users. In this paper, it will analyze the inconvenient problem in using the QR code system that recently introduced and will propose solutions. Also, it will propose suggestions to solve inconvenience that caused by system that supports NFC simple payment terminal in Korea is not universalize by analyze case study on the overseas simple payment system. It will also propose opinions on the matters that customer having responsible for event of a small financial accident related to loss or theft when using the simple payment system. Then it will suggest expected requirements to prepare new security technical countermeasures and solve the conditions of meeting expectation satisfaction of users.

• Journal of Internet Computing and Services
• /
• v.23 no.1
• /
• pp.135-145
• /
• 2022

This paper presented a method to build a predictable smart ammunition logistics system using the 4th industrial technology for ammunition logistics, which is the core functions in the field of defense and logistics. We have analyzed the current level of ammunition logistics with various perspectives such as domestic and overseas logistics policies, technology trends, ammunition logistics characteristics, the smart logistics certification measures by Ministry of Land, Infrastructure and Transport. As a result it is considered that the current ammunition logistics needs needs improvement. To improve this, we presented a direction based on the implications derived after analyzing various ongoing programs such as wired/wireless-based automation, smart ammunition depots, and logistics innovation of the army, navy, and air force that can be applied to the ammunition logistics. In order to implement a data-based smart ammunition logistics management system that can achieve innovation and efficiency of total life cycle while meeting changes in the battlefield environment, we presented 4 objectives such as "automation and modernization of field work", "3D-based storage management & improvement of issuing at war," and "data management for prediction-oriented ammunition management". it is expected that there will be benefits such as improvement of operational continuity, guarantee of ammunition reliability, budget reduction, improvement of inefficiencies such as delay, waiting, and double work, and reduction of accidents.

• Korean Journal of Agricultural Science
• /
• v.51 no.2
• /
• pp.133-146
• /
• 2024

Selection of gear reduction ratio is essential for machine design to ensure suitable power and speed during agricultural operations. The goal of the study was to evaluate the gear reduction ratio for a 1.6 kW four-wheel-drive (4WD) multi-purpose agricultural electric vehicle platform using workload data under different off-road conditions. A data acquisition system was fabricated to collect workload (torque) of the vehicle acting on the gear shaft. Field tests were performed under three driving surfaces (asphalt, concrete, and grassland), payload operations (981, 2,942, and 4,903 N), and slope conditions (0 - 4°, 4 - 8°, and 8 - 12°), respectively. Commercial speed reduction gear phases were attached to the input shaft of the vehicle powertrain. The maximum required torque was recorded as 37.5 Nm at a 4,903 N load with 8 - 12° slope levels, and the minimum torque was 12.32 Nm at 0 - 4° slope levels with a 981 Nm load for a 4 km/h speed on asphalt, concrete, and grassland roads. Based on the operating load condition and motor torque and rotational speed (TN) curve, the minimum and maximum gear reduction ratios were chosen as 1 : 50 and 1 : 64, respectively. The selected motor satisfied power requirements by meeting all working torque criteria with the gear reduction ratios. The chosen motor with a gear reduction ratio of 1 : 50 was suitable to fit with the motor T-N curve, and produced the maximum speeds and loads needed for driving and off-road activities. The findings of the study would assist in choosing a suitable gear reduction ratio for electric vehicle multi-purpose field operations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.4
• /
• pp.870-879
• /
• 1997

At crypto'89 meeting, D. chaum suggested an undeniable signature scheme. Undeniable signatures are verified via a protocol between the signer and verifier, so the cooperation of the signer is necessary. So far, ther have been several variants of undeniable signatures to obtain a signature scheme, which can control the abous of ordinary digital signatures. In this paper we integrate these variants into a generalized undeniable-type signature scheme. Also, it will be pointed out, that undeniable signature schemes but its first realization are vulnerable in full view of eavesdropping third party. Moreover, to solve this problem, we propose a new type of digital signature, called "result-indisting-uishable undeniable signature" and construct a practical protocol that implements it.