• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.1
• /
• pp.99-104
• /
• 2015

Life rafts, which has been used for domestic vessel currently, are fabricated mostly for the ocean-going vessels in accordance with the SOLAS Resolution. Therefore, there is not any small-sized life raft which can be installed on small fishery boat, leisure boat and cargo vessel with those length shorter than 20 meters in our country. However, in many foreign countries, new standards or the small-sized life rafts applicable to those small vessel have been developed according to the standard of ISO 9650. Furthermore, they make their effort to contribute the safety for the life at sea by supply the superior product of life rafts, which have been adopted by light material (i.e. thermoplastic polyurethane, TPU) and economic production process (i.e. heat sealing, radio-frequency welding, RFW), etc. In this paper, the development results of the small-sized life raft, which has been used the lightening material TPU and fabricated by RF-welding method, will be introduced.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.6
• /
• pp.1734-1744
• /
• 2015

Majority of marine accidents that occur on fishing vessels are engine accidents. This comprises more than 26 % of the total annual fishing vessel marine accident cases. Large numbers of engine accidents happen in the cooling water system, which are mostly caused by negligence on regular check-up and repair. Notably, small-sized ships have higher engine accidents occurrence rate compared to medium-and large-sized ships. Based on the Report of the Korea Ship Safety Technology Authority, engine accident cases reached 3,032 out of the total 3,081 cases. This study researches on the differences between the small-sized ship pilot, an operator of a vessel engine of less than 200 tons, and a 6th level marine engineer, in terms of the relationship between management forms and what causes the marine accidents in association with the cooling water system. It also studies and analyzes the differences in frequency of the accident occurrence between the two groups. ${\chi}^2$ qualification was imposed through the SPSS statistical analysis program and it got qualified at the significance level of 5%. The research shall be utilized as one of the base line data for the reduction of marine accidents.

• Journal of Navigation and Port Research
• /
• v.35 no.10
• /
• pp.785-791
• /
• 2011

This paper describes the evaluation and selection of MEMS(Micro-Elect Mechanical System) based inertial sensor to fit to implement the Inertial Measurement Unit(IMU) for a small-sized vessel at sea. At first, the error model and the noise model of the inertial sensors are defined with Euler's equations and then, the inertial sensor evaluation is carried out with Allan Variance techniques and Monte Carlo simulation. As evaluation results for the five sensors, ADIS16405, SAR10Z, SAR100Grade100, LIS344ALH and ADXL103, the combination of gyroscope and accelerometer of ADIS16405 is shown minimum error having around 160 m/s standard deviation of velocity error and around 35 km standard deviation of position error after 600 seconds. Thus, we select the ADIS16405 inertial sensor as a MEMS-based inertial sensor to implement IMU and, the error reducing method is also considered with the search for reference papers.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.4
• /
• pp.782-786
• /
• 2004

The Wireless-LAN was developed and Wired-LAN substitution from the field which the space where it is restricted is special it used. But, from the field which is various the use is attempted to listen to recently. The shedding of blood which the oceanic accident which occurs recently5 year for is principal is The GMDSS with the formation vessel which is managed with agreement depends here upon and it is a collision of the small-sized vessel which is not managed. Cause the Facilities for the safety-communications system is not introduced is the actual condition in poverty of the small-sized vessel. In this study, recently with the AIS where becomes the introduction it proposed similar function the system which is cheap it does.

• Nuclear Engineering and Technology
• /
• v.51 no.6
• /
• pp.1681-1688
• /
• 2019

In accordance with ASME Boiler and Pressure Vessel (B&PV) Code Sec.XI Appendix. G, a postulated crack is located at the beltline of a reactor pressure vessel because the neutron flux at the beltline is higher than elsewhere. This means that the distance between the core and the semi-spherical bottom head is longer than the distance between the core and the cylindrical beltline. However, several Small and Medium sized Reactors have bottom heads with diverse shapes, including dished or semi-elliptical shapes, to satisfy the requirement and performance. So, the aim of this paper is to evaluate the effect of crack location on Pressure-Temperature limit curve. To do this, two types of postulated crack location, such as beltline and semi-elliptical bottom head, were adopted to derive the Pressure-Temperature limit curve. Also, parametric studies for neutron flux, crack shape and so on were performed. As a result, core critical temperature of semi-elliptical bottom head is found to higher than that of beltline even when they have same values of thickness and neutron flux. This result will be useful to enhance the understanding of Pressure-Temperature limit curve.

• Journal of the Korean Society of Safety
• /
• v.16 no.4
• /
• pp.29-38
• /
• 2001

The purpose of this paper is to evaluate the structural integrity of a reactor pressure vessel subjected to the pressurized thermal shock(PTS) during the transient events, such as main steam line break(MSLB) and small break loss of coolant accident(SBLOCA). For postulated surface or subsurface cracks, variation curves of stress intensity factor are obtained by using the three different methods, including ASME section XI code anlysis, the finite element alternating method and the finite element method. From the stress intensity factor curves, the maximum allowable nil-ductility transition temperatures(RT/NDT/) are determined by the tangent criterion and the maximum criterion for various crack configurations and two initial transient events. As a result of the analysis, it is noted that axial cracks have smaller maximum allowable RT$_{NDT}$ values than same-sized circumferential cracks for both the transient events in the case of the tangent criterion. Axial cracks have smaller RT$_{NDT}$ values than same-sized circumferential cracks for MSLB and circumferential cracks have smaller values than axial cracks for SBLOCA in the case of the maximum criterion.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.73-78
• /
• 2004

For the preliminary stages of ship design it is necessary to develop a basic design, which specifies the main particulars of the vessel. based on the requirements given by the owner. An efficient design enables the shipyard to make a rough estimate of the construction costs and to put forward a favourable quote during the call for tenders. The parametric determination of the main particulars of the vessel involves the application of empirical formulae. These formulae have been created after detailed tests and research by maritime research institutions and researchers had been carried out. Here, the design of a medium sized Bulk Carrier (26000t dwt) with a service speed of 17 knots for carrying rice and rock phosphate has been illustrated. Medium sized Bulk Carriers (25,000t dwt - 50,000t dwt) are in steady demand among small shipping companies. They have a size advantage, in that port size restrictions do not affect their design tremendously. Nevertheless, structurally. they are one of the most difficult to build. During design, the rules of the maritime regulatory bodies were strictly adhered to.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.6_2
• /
• pp.899-908
• /
• 2021

It is expected that the global market for vessel repair and remodeling will grow up to the scale of about 25 billion dollars by 2023. Korea's shipbuilding industry is leading the world with its international competitiveness in design and production technology. The actual status of vessel repair industry, however, is poor as there are only two or three companies for vessel repair that can deal with large vessels in the area of Gyeongnam. The reason is that civil complaints are filed severely about environmental problems and environment-related regulations are so strict that it is fairly hard to get governmental approval for the operation of a vessel repair workplace. Domestic vessel repair companies mainly target small- and medium-sized vessels. There are only few workplaces that can carry out regular examination or repair work on large vessels such as LNG vessels, and due to the high price of vessel repair, most of the domestic repair work on large vessels including LNG vessels tends to be snatched by markets in Southeast Asia or China. Despite the tremendous domestic demand of Korea that has established the world's first shipbuilding industry and world's sixth biggest harbor infrastructure, its vessel repair industry can be said to be in very poor condition. In order to vitalize vessel repair industry, this study is aimed to analyze the environmental influence of vessel repair workplaces in Gyeongnam where vessel repair companies are concentrated and suggest standard processes by analyzing vessel repair processes precisely.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.263-268
• /
• 2005

Nowadays, the vessel size is tending to be bigger and bigger, so port facilities are following this trend, which has been shown inthe competition of Hub-Port among the main ports such as Port of Busan and Port of Shanghai. But there are limited numbers of large container vessels and $70\%$ of the call ships at Busan port are middle and small sized ships which are less than 20,000ton. So we need to consider the handling facilities for these sized ships, but it has disregarded. In this paper, we estimate the optimum level of crane and labor according to vessel's size by container handling cost value reflecting size of vessel; size and number of crane and labor structure.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.7
• /
• pp.858-862
• /
• 2018

The purpose of this study is to improve the current vessel departure control regulations to prevent traffic congestion after the lifting of vessel departure controls due to restricted visibility. AIS data was collected to analyze the traffic volume of normal traffic flow and after departure control. A statistical test was conducted to confirm the difference in traffic volume at peak hours according to whether or not departure control was used. The results of the t-test showed that there was a significant difference in traffic volume among groups of less than 10,000 tons in gross tonnage. However, the Mann-Whitney test showed no difference in traffic volume regardless of vessel control. Small and medium-sized vessels of less than 10,000 tons after departure control increased in traffic volume by 142% over normal traffic, and it was concluded that traffic congestion resulted as these small and medium-sized vessels were departing at the same time as large vessels of more than 10,000 tons. In order to prevent vessel collision accidents due to traffic congestion, it is suggested that the navigability of vessels less than 160 m or less than 10,000 tons should be improved.