• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2013년도 춘계학술발표대회
• /
• pp.937-940
• /
• 2013

현대 S/W 프로젝트에서의 규모와 복잡성이 증대됨에 따라 표준 프로젝트 관리 프로세스의 도입과 연구가 활발하게 진행이 되고 있으나, 운영성 프로젝트와 같은 소규모 프로젝트의 관리를 위한 프로젝트 관리 프로세스에 대한 연구는 미흡한 실정이다. 본 논문에서는 국제 표준 프로젝트 관리 프로세스인 ISO-21500 과 실제 소규모 프로젝트 수행사례를 비교하여 소규모 프로젝트 관리 특성을 파악하고, Core 관리영역과 Support 프로세스 영역을 비교 분석하였다. 연구 결과로 소규모 프로젝트의 통합, 범위, 일정 관리 영역 항목에서 품질 및 리스크와 같은 다른 관리 영역에 비해 더 많은 비중으로 수행되고 있음을 확인할 수 있었다. 향후 본 연구를 통해 소규모 프로젝트 수행 시 고려되어야 할 사항들을 정의하여 소규모 소프트웨어 프로젝트를 더 성공적으로 수행할 수 있도록 도움이 되고자 한다.

• 융합정보논문지
• /
• 제10권5호
• /
• pp.216-223
• /
• 2020

본 연구는 신생아 두피 모발의 기저부에서부터 말단부위까지의 외부형태와 모발 가로 직경 대비 모발 표면에 노출된 비늘의 장축 직경 비율을 주사전자현미경으로 관찰하였다. 신생아 모발은 두피에 인접한 부위에서 부터 모발의 끝부분으로 갈수록 완만하게 가늘어지는 것을 확인하였다. 본 연구에서 모발의 두께가 커질수록 노출된 비늘의 장축 직경 비율은 상대적으로 작아지는 것으로 확인되었지만 모발 표면의 노출된 비늘 장축 직경은 모발의 굵기에 관계없이 비슷한 길이로 나타났다. 결론적으로 가는 모발이나 굵은 모발 표면에 노출된 비늘의 장축 직경은 크게 변화하지 않는 것을 확인하였다.

• 한국대기환경학회지
• /
• 제18권6호
• /
• pp.539-546
• /
• 2002

The physicochemical properties of solid wastes generated from seven highway service areas, four branch offices, and one construction site were analyzed in concert with air pollutants including heavy metals emitted from near-by small-scale incinerators. The amount of solid wastes generated from highway areas has been increasing with recent increases in the number of highways and passengers. Twelve incinerators examined in this study generally had capacity smaller than 100 kg/hr, most of which were equipped with cyclone for dust removal. It was seen that the concentrations of the gas-phase air pollutants (e.g., SO$_2$, NO$_{x}$, HCl and H$_2$S) were above the acceptable emission standards except one or two sites. CO concentrations at all incinerators were also higher due to incomplete combustion. In addition, particulate matters showed concentration six times higher at their maximum. The results of heavy metal analysis showed that the concentrations of Cu, Cd, and Ni satisfied the emission standards. whereas Pb at one site and Zn at five sites exceeded the standards. Cr measurement results indicated that 9 of 12 incinerators had higher values than the standard; especially one branch office showed nine times higher than normal concentration. In order to satisfy more stringent emission standards in the near future, it is necessary to install air pollution control system and to develop an intensified management plan.n.

• 한국수소및신에너지학회논문집
• /
• 제23권3호
• /
• pp.243-249
• /
• 2012

A lightweight 200W direct methanol fuel cell (DMFC) stack is designed and fabricated to power a small scale Unmanned Aerial Vehicle (UAV). The DMFC stack consists of 33-cells in which membrane-electrode assemblies (MEAs) having an active area of 88 $cm^2$ are sandwiched with lightweight composite bipolar plates. The total stack weight is around 3.485 kg and stack performance is tested under various methanol feed concentrations. The DMFC stack delivers a maximum power of 248 W at 13.2 V and $71.3^{\circ}C$ under methanol feed concentration of 1.2 M. In addition, the voltage of individual cell in the 33-cell stack is measured at various current levels to ensure the stability of DMFC stack operations. The cell voltage distribution data exhibit the maximum cell voltage deviation of 28 mV at 15 A and hence the uniformity of cell voltages is acceptable. These results clearly demonstrate that DMFC technology becomes a potential candidate for small-scale UAV applications.

• 한국농촌건축학회논문집
• /
• 제25권3호
• /
• pp.37-45
• /
• 2023

This study is conducted to provide an empirical review on how schools play a pivotal role in the regional communities. For this, the use of closed schools, activities to revive small-scale schools, and activities related to nearby schools outside the village were analyzed for villages that have participated and have been awarded in the Contest for Making Happy Rural Communities by the Ministry of Agriculture, Food and Rural Affairs. The results of this are as follows. Out of 204 villages that won the contest, there were 19 cases of school closures. Of these 19 cases, there are 17 cases in which the closed school facilities still exist. For the two remaining cases, there are no buildings and only the site remains. To summarize the use of these schools, the functions are being combined and are determined within the range that local residents can operate. The impact or success factors on the region can be summarized into five main categories through the revival of schools in the crisis of closure. First, it was an opportunity to lay an organizational foundation for village projects in the future by reorganizing the village's organization, such as the formation of a village promotion committee to revive the schools. Second, it did not just introduce outsiders to increase the population, but supported housing and jobs for them to successfully settle down. Third, a cultural community was created with senior and junior residents, and finally, the residents became teachers or formed a village education communities such as lifelong education. In the relationship with schools existing outside the village, activities with members of the surrounding schools and linked activities are being carried out in the sense of "school".

• Tribology and Lubricants
• /
• 제28권2호
• /
• pp.62-69
• /
• 2012

Atomic force microscopy (AFM) has been widely utilized as a versatile tool not only for imaging surfaces but also for understanding nano-scale interfacial phenomena. By measuring the responses of the photo detector due to bending and torsion of the cantilever, which are caused by the interactions between the probe and the sample surface, various interfacial phenomena and properties can be explored. One of the challenges faced by AFM researchers originates in the physics of measuring the small forces that act between the probe of a force sensing cantilever and the sample. To understand the interactions between the probe and the sample quantitatively, the force calibration is essential. In this work, the procedures used to calibrate AFM instrumentation for nano-scale force measurement in normal and lateral directions are reviewed.

• Wind and Structures
• /
• 제4권1호
• /
• pp.73-84
• /
• 2001

Analysis of pressures measured on the roof of the full-scale Texas Tech building and a 1/50 scale model of a typical house showed that the pressure fluctuations on cladding fastener and cladding-truss connection tributary areas have similar characteristics. The probability density functions of pressure fluctuations on these areas are negatively skewed from Gaussian, with pressure peak factors less than -5.5. The fluctuating pressure energy is mostly contained at full-scale frequencies of up to about 0.6 Hz. Pressure coefficients, $C_p$ and local pressure factors, $K_l$ given in the Australian wind load standard AS1170.2 are generally satisfactory, except for some small cladding fastener tributary areas near the edges.

• 대한조선학회논문집
• /
• 제51권3호
• /
• pp.231-238
• /
• 2014

In this study, the self-propulsion tests are performed in INHA towing tank. And the effective wake characteristics of the KVLCC2 and the KCS models are compared by the experimental results. The form factor is independent of Reynolds number. To estimate the hydrodynamic performance of a full scale ship, the form factor is determined to consider attendant on Reynolds number. In this research, the power predictions are carried out considering the form factor difference of model and full scale ship. The results of this research could be used as one of the fundamental data to the powering performance prediction.

• 한국기계가공학회지
• /
• 제18권5호
• /
• pp.29-36
• /
• 2019

In modern society in which the fourth industrial revolution has come to the fore and rapid technology innovations are taking place, a phenomenon of making and selling small quantities of various products that consumers want instead of mass producing one item has emerged. As the market is moving toward the multi-item small-sized production system, there is a need for a system in which a machine independently judges and carries out machining and post-processing. In order for a machine to judge processing on its own, it is necessary to measure the force applied to a product. This study aimed to develop a large-scale dynamometer that enables three-axis measurement using octagonal ring load cells. As for the device's configuration, four octagonal ring load cells, which were previously researched, were used to enable three-axis measurement. It was reconfigured by modifying the attachment position of the octagonal ring load cells' strain gauge and the Wheatstone bridge of each axis, and a system was set up to allow the monitoring of data measured through the monitor. The configured device calculated a strain rate by an experiment, and this rate was compared with the theoretical strain rate to find a correction value. The correction value was entered into a formula, deriving a modified formula. The modified formula was entered into the device, which completed the large-scale dynamometer.

• 한국콘텐츠학회논문지
• /
• 제22권6호
• /
• pp.92-103
• /
• 2022

본 연구의 목적은 농어촌 소규모 중학교의 교육과정 편성·운영 개선방안을 도출하고자 하는 것이다. 이를 위해 교사·학생 면담과 수업관찰을 통하여 교육과정 편성·운영 실태와 요구를 분석하였다. 전국을 5개 권역으로 나누어 권역별 2개교 씩 총10개 농어촌 소규모 중학교의 사례를 분석하였다. 연구결과 교육과정 측면에서 통합운영학교의 학교(급) 간 교육과정 연계 미흡, 지역사회 측면에서 농어촌 지역 내 교육 시설 및 문화 공간 부족, 교사 수급 측면에서 농어촌 소규모 중학교 교사 수급 문제에 대한 근본적인 해결책 마련 필요와 같은 쟁점을 도출 할 수 있었다. 논의된 쟁점을 중심으로 다음과 같은 교육과정 편성·운영 개선방안을 도출할 수 있었다. 첫째, 교육과정 측면에서 내실 있는 학교(급) 간 통합운영학교 및 공동 교육과정 운영을 위해서는 농어촌 소규모 중학교의 교육과정 편성·운영의 자율권을 대폭 확대할 필요가 있다. 둘째, 지역사회 측면에서 농어촌 지역 내 교육 시설 및 문화 공간 부족에 대한 개선방안으로 교육 및 문화 중심지로서의 학교 공간 혁신과 학생 교육활동 안전 및 편의성 증진을 위한 교통 시스템 구축을 제안하였다. 마지막으로 교사 측면에서 순회교사 운영의 어려움을 개선하기 위해서는 교육청 수준에서 교·강사 인력풀의 체계적인 확대 및 운영 등을 제안하였다.