• 한국가시화정보학회지
• /
• 제22권2호
• /
• pp.104-114
• /
• 2024

To effectively control heat generation resulting from advancements in fast discharging technology for electric vehicle batteries, hybrid Battery Thermal Management Systems (BTMS) are gaining attention. In this study, a BTMS combining Phase Change Material (PCM) with Oscillating Heat Pipe (OHP) was designed. During the phase change process of the PCM, the maximum battery temperature increased slowly. Additionally, due to the excellent heat transfer capability of the OHP, the PCM/OHP BTMS delayed the time when the maximum battery temperature exceeded 50 ℃ by 810 s compared to the PCM/copper fin BTMS, resulting in the maximum battery temperature that was 41.29 ℃ lower at 3600 s. Furthermore, in the section where the latent heat of the PCM had the greatest impact, the slope of the battery temperature difference was 0.0017 lower than that of the PCM/copper fin BTMS. Therefore, the PCM/OHP BTMS demonstrates its potential as a viable hybrid BTMS.

• 한국지리정보학회지
• /
• 제17권3호
• /
• pp.104-115
• /
• 2014

제방(Levee)은 하천을 따라 축조한 공작물로서, 홍수 등 자연 재해로부터 제내지를 보호하는 역할을 한다. 본 논문에서는 낙동강 지역을 촬영한 항공 라이다 자료(airborne topographic LiDAR data)와 국가 수자원 관리 종합정보시스템에서 제공하는 제방현황 자료를 활용하여 제방 GIS 데이터베이스 구축에 관한 연구를 진행한다. 우선, 미국 공병단에서 제공하는 제방 데이터베이스와 국가 수자원 관리 종합 정보시스템에서 제공하는 우리나라 제방현황 테이블을 비교 및 분석한다. LiDAR 자료로부터 제방 정보를 추출하기 위해서, 보간법을 이용하여 LiDAR 점군 자료들로부터 디지털 표면 모델을 생성한 후, 디지털 표면 모델에서 인접한 픽셀간의 최대 고도값 차이를 계산하여 경사 지도를 만든다. 그리고, 경사도 분류 방법을 이용하여 제방의 주요 구성 요소인 둑마루 및 비탈 경사를 나타내는 폴리곤을 각각 추출한다. 그리고, 둑마루 및 비탈 경사 폴리곤들로부터 추출한 속성정보와 국가 수자원 관리 종합정보시스템에서 제공하는 제방현황 자료를 병합하여 제방 GIS 데이터베이스를 구축한다. 마지막으로, 본 연구에서는 라이다 자료만을 활용하여 제방 GIS 데이터베이스를 구축하였을 때의 장점 및 한계에 관해서 토론하고, 이를 보완하기 위한 차후 연구에 관한 방향을 제시한다.

• 한국지리정보학회지
• /
• 제8권4호
• /
• pp.165-175
• /
• 2005

지리정보시스템(GIS)은 정보관리나 공간분석을 통해서 문화유적의 보존과 국토이용을 위한 목적에 유용하게 사용될 수 있다. 본 연구의 목적은 지리정보시스템을 이용하여 전국적으로 분포하는 요지유적의 위치를 입력하고, 입지특성을 분석하여, 분포지역을 예측하는데 있다. 이를 위하여 전국의 약 1,200개소 요지유적의 위치를 입력하였고, 각 위치별 입지분석(고도, 사변의 경사, 사변방향, 수계) 및 통계분석을 통해 요지의 입지특성을 해석하였다. 요지유적 분포는 1에서 5까지 등급화된 고도분포, 사변경사, 수계비고, 수계거리, 사변방향의 5개 변수에 대한 중첩분석결과에 의하여 결정되었다. 대전광역시 성북동 일대에 분포하는 요지유적을 대상으로 분포를 예측한 결과 조사지역의 산능선 하부와 충적평야에 이르는 중간지역에서 요지유적 분포 가능성이 높게 나타났으며, 야외에서 확인된 요지유적의 분포와도 일치하였다. 본 시범연구 결과 전국적으로 더 많은 요지분포 자료가 확보된다면 요지분포가 확인되지 않은 지역에 대한 분포 예측력이 보다 향상될 것으로 기대된다.

• Journal of Forest and Environmental Science
• /
• 제39권4호
• /
• pp.254-260
• /
• 2023

A sensor system has been developed that uses an ultrasonic sensor to detect the downhill slope on the side of a forest road and prevents a vehicle-type forest machine from rolling down a mountainside. A specular reflection of ultrasonic wave might cause severe issues in measuring distances to targets. By investigating the installation angle of the sensor to minimize the negative effects of specular reflection, the installation angle of lateral monitoring ultrasonic sensor could be determined based on the width of road shoulder. Obstacles such as small rocks or piece of log in a forest road may cause the forest machine to be overturned while the machine riding over due to excessive its posture change. It was determined that the laser sensor could be a part of a sensor system capable of specifying the location and size of small obstacles. Not only this sensor system including ultrasonic and laser sensors can issue a warning of dangerous sections to drivers in forest forwarders currently in use, but also it can be used as a driving safety sensor in autonomous forest machine or remote-control forest machine in the future.

• 품질경영학회지
• /
• 제31권4호
• /
• pp.239-246
• /
• 2003

Dynamic robust design has been regarded as the most powerful design methodology for improving product quality, Dynamic SN ratio adopted in dynamic robust design combines two major quality attributes, the variability around the linear function and the slope of the linear function, into a single design metric. The principal shortcoming associated with the dynamic SN ratio is that the metric is independent of designer's preferences for the quality attributes due to priori sets of attribute tradeoff values inherent in it. Therefore, a more rigorous preference­based design metric to accurately capture designer's intent and preference is needed. A new design metric that can be used in dynamic robust design is proposed. The effectiveness of the proposed design metric is examined with the aid of a demonstrative case study and the results are discussed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 B
• /
• pp.693-696
• /
• 1999

This paper describes a new voltage recorder for the voltage management of a power distribution line by using a new voltage measurement technique. The RMS(Root Mean Square) voltage measurement for the power line under the assumption of a sinusoidal input voltage is taken by the full-wave rectifier, half-adder utilizing operational amplifier(OP) circuit. A/D converter utilizing a dual slope converter converts an analog voltage signal into a serial pulse. The pulse is counted with a single chip micro-controller, converted with the RMS voltage, and saved into a flash memory. In the last, a new voltage recorder with compact size and multifunction is developed. Also, Voltage Management System that can analyze the stored data via RS-232C cable is developed based on Windows 95 and Visual C++.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.927-932
• /
• 2010

This study made a nationwide metropolitan region map on the basis of disaster vulnerability and administrative boundary, and based on it, it divided small-sized regions and constructed disaster history of each region. For the disaster vulnerability, the study wrote slope, aspect, curvature, wetness index, and drainage density, compared and analyzed regions with disaster and geomorphic elements to distinct the factor with high correlations, and based on it, it divided small-sized regions for forecasting and warning system of middle regions(Gangwon province, Chungchung province, and Jeolla province). Through the method, Gangwon region were divided into 4 small-sized regions, Chungchung into 5 small-sized regions, and Jeolla into 6 small-sized regions.

• 한국환경복원기술학회지
• /
• 제8권4호
• /
• pp.81-90
• /
• 2005

This study aimed to address problems and suggest solutions in applying seed mixture design criterior of the slope revegetation works according to "The guidelines of Slope revegetation design and construction" proposed by the Ministry of Construction and Transportation. To do this, the planting thickness was set to be the same 2cm while the composition of seeds was made different, which was planted in artificial slopes and fields. The main results were summarized as follows. In the test, when applying the provisional standards of the plant mixtures proposed by the Ministry of Construction and Transportation, tree seeds and native plants were found poor coverage effect in the early stage in all test plots due to introduced grasses. This was because introduced winter grasses which grew well in the early stage, could grow densely, so it might hamper the growth of other plants. Therefore, it was found desirable that standards for seed mixing should be adjusted down by 10% and the ratio of introduced grasses in the mixture should be lowered to 25% while native plants should increase to 20-25%.

• 한국GIS학회:학술대회논문집
• /
• 한국GIS학회 2003년도 공동 춘계학술대회 논문집
• /
• pp.517-522
• /
• 2003

증발산량의 정확한 산정은 자연현상과 인문현상을 이해하는데 있어 중요하다. 증발산량의 점추정이 갖는 한계를 극복하기 위해 원격탐사를 이용하여 증발산량을 추정하는 방법이 활발히 연구되고 있다. 이 중 SEBAL 모형은 원격탐사 자료를 이용하는 기존의 방법에 비해 소요되는 자료가 적으면서도, 증발산량을 정확하게 추정하는 방법으로 알려지고 있다. 이 연구에서는 우리나라 지형에서 SEBAL 모형의 적용 가능성을 검증하였고, 증발산량 분포의 시공간적 특성을 살펴보았다. 연구 지역은 금강 상류의 보청천 유역이며, Landsat 5 TM영상(1995년 1월 11일, 4월 1일, 5월 3일, 10월 10일, 11월 27일)을 이용하였다.

• 한국조경학회지
• /
• 제24권3호
• /
• pp.115-132
• /
• 1996

The purpose of this study is to estimate the soil loss amount with Geographic Information System according to the land use change of Buju mountain area in Mokpo city. To estimate the soil loss, Universal Soil Loss Equation which is the most proper technique to predict soil loss in this site condition is adopted and IDRISI, a raster GIS software, is used. GIS application with USLE is very efficient to estimate soil loss accurately and fastly. In order to decide value and to find application method of USLE factors, we used existing rainfall erosion index, soil erodibility analysis, slope length, slope steepness, vegetation management and practices, which are rated by GIS through the analysis of various studies related USLE. The result of this study was compared with the previous other researches to verify our method of constructing numerical data of USLE's factors. The result of verification of our way showed significance for the soil loss in forest area. But the result of verification for the soil loss in forest area. But the result of verification for the soil loss of cultivated area showed some errors. It seems that this result was due to local variation of topographical map.