• Korean Journal of Soil Science and Fertilizer
• /
• v.11 no.2
• /
• pp.61-66
• /
• 1979

This experiment was conducted to find out the simple and economical method to improve physical properties of the soil that was very poor for the establishment of orchard. Jeonnam clay loam soils distributed mainly on rolling and hill side slope, were treated with the explosion of two kinds of dynamite at the depth of 1 m. The change of physical properties was investigated vertically and horizontally after soil profile had settled to some extent. The results were summarized as : 1. The original soil was very high in bulk density and soil hardness. Total porosity and aeration porosities were lower than critical level providing root elongation. It was more apparent in the subsoil than in the surface soil. 2. It was recognized that soil mass destruction and cracking by dynamite explosion decreased soil bulk density and soil hardness and increased porosity, especially non-capillary pores. 3. Effective radius of the improved physical properties by explosion with two dynamites was 100cm at 60cm depth and 30cm at 80cm depth. But with the use of three dynamites it was 100cm at 80cm depth. 4. It was thought that soil mass destruction and cracking caused by explosion was uneven in the two dynamites, and three dynamites was more effective to improve physical properties evenly. 5. With the use of two dynamites, Ammonium explosive was superior to gelatin dynamite.

• Journal of Korea Water Resources Association
• /
• v.43 no.11
• /
• pp.995-1009
• /
• 2010

Accelerated soil erosion due to extreme climate change, such as increased rainfall intensity, and human-induced environmental changes, is a widely recognized problem. Existing soil erosion models are generally based on the gross erosion concept to compute annual upland soil loss in tons per acre per year. However, such models are not suitable for event-based simulations of erosion and deposition in time and space. Recent advances in computer geographic information system (GIS) technologies have allowed hydrologists to develop physically based models, and the trend in erosion prediction is towards process-based models, instead of conceptually lumped models. This study aims to propose an effective and robust distributed rainfall-sediment yield-runoff model consisting of basic element modules: a rainfall-runoff module based on the kinematic wave method for subsurface and surface flow, and a runoff-sediment yield-runoff model based on the unit stream power method. The model was tested on the Cheoncheon catchment, upstream of the Yongdam dam using hydrological data for three extreme flood events due to typhoons. The model provided acceptable simulation results with respect to both discharge and sediment discharge even though the simulated sedigraphs were underestimated, compared to observations. The spatial distribution of erosion and deposition demonstrated that eroded sediment loads were deposited in the cells along the channel network, which have a short overland flow length and a gentle local slope while the erosion rate increased as rainfall became larger. Additionally, spatially heterogeneous rainfall intensity, dependant on Thiessen polygons, led to spatially-distinct erosion and deposition patterns.

• Economic and Environmental Geology
• /
• v.41 no.2
• /
• pp.243-252
• /
• 2008

The Iho and Hamdeok beaches, the major coastal beaches in Jeju Island, have been studied through size analysis and using an experimental extension pole and sediment trap in beach profile, in order to understand their textural characteristics, migration patterns, and seasonal change in beach geometry. The Iho beach is composed of coarse and medium sands, 590 m in total length. The foreshore slope is 12.3$^{\circ}$ in summer and 10.8$^{\circ}$ in winter, which shows more steeper in summer. The Hamdeok beach consisting mostly of shell fragments is 950 m long, $5.7{\sim}7.4^{\circ}$ steep and 97.4${\sim}$114.5 m wide, respectively. The suspended load drift concentrations in the studied beaches showed 4.5 mg/l during the period of summer and 33.2 mg/l in winter, and those of fine-grained sediments are derived mostly from the marine of northeastward direction. The typical beach transformation of the Iho beach is resulting from the construction of jetties in the west side that built up the sand inside the jetties, whereas the erosion is occurring on the east side of beach. The center and berm sides of the sand in the Hamdeok beach drift into the dune side during the period of the stormy winter season.

• Applied Chemistry for Engineering
• /
• v.18 no.1
• /
• pp.24-28
• /
• 2007

The etching of zinc oxide (ZnO) thin films has been studied using a high density plasma in a $Cl_2/Ar$ gas. The etch characteristics of ZnO thin films were systematically investigated on varying $Cl_2$ concentration, coil rf power, dc-bias voltage, and gas pressure. With increasing $Cl_2$ concentration, the etch rate of ZnO thin film increased, the redeposition around the etched patterns decreased but the sidewall slope of the etched patterns slanted. As the coil rf power and dc-bias voltage increased, the etch rates of ZnO thin films increased and etch profiles of ZnO thin films were improved. With increasing gas pressure, the etch rate of ZnO thin films slightly increased but little change in etch profile was observed. Based on these results, the optimal etching conditions of ZnO thin film were selected. Finally, the etching of ZnO thin films with a high degree of anisotropy of approximately $75^{\circ}{\sim}80^{\circ}$ without the redepositions and residues was successfully achieved at the etching conditions of 20% $Cl_2$ concentration, coil rf power of 1000 W, dc-bias voltage of 400 V, and gas pressure of 5 mTorr.

• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.428-446
• /
• 1997

Restorative procedures can lead to weakening tooth due to reduction and alteration of tooth structure. It is essential to prevent fractures to conserve tooth. The resistance to fracture of the restored tooth may be influenced by many factors, among these are the cavity dimension and the physical properties of the restorative material. The placement of direct composite resin restorations has generally been found to have a strengthening effect on the prepared teeth. It is the purpose of this investigation to study the relationship between the cavity isthmus and the fracture resistance of a tooth in composite resin restorations. In this study, MO cavity was prepared on maxillary first premolar. Three dimensional finite element models were made by serial photographic method and isthmus(1/4, 1/3, 1/2 of intercuspal distance) were varied. Two types of model(B and R model) were developed. B model was assumed perfect bonding between the restoration and cavity wall and R model was left unfilled. A load of 500N was applied vertically at the first node from the lingual slope of the buccal cusp tip. This study analysed the displacement, 1 and 2 direction normal stress and strain with FEM software ABAQUS Version 5.2 and hardware IRIS 4D/310 VGX Work-station. The results were as follows : 1. Displacement of buccal cusp in R model occurred and increased as widening of the cavity, and displacement in B model was little and not influenced by cavity width. 2. There was a significant decrease of stress resulting in increase of fracture resistance in B model when compared with R model. 3. With the increase of the isthmus width, B model showed no change in the stress and strain. In R model, the stress and strain increased both in the area of buccal-pulpal line angle and the buccal side of marginal ridge, therefore the possibility of crack increased. 4. The stress and strain were distributed evenly on the tooth in B model, but in R model, were concentrated on the buccal side of the distal marginal ridge and buccal-pulpal line angle, therefore the possibility of fracture increased.

• Survey Research
• /
• v.9 no.2
• /
• pp.1-27
• /
• 2008

Problems of incomplete data are pervasive in statistical analysis. In particular, incomplete data have been an important challenge in repeated measures studies. The objective of this study is to give a brief introduction to missing data mechanisms and conventional/recent missing data methods and to assess the performance of various missing data methods under ignorable and non-ignorable missingness mechanisms. Given the inadequate attention to longitudinal studies with missing data, this study applied recent advances in missing data methods to repeated measures models and investigated the performance of various missing data methods, such as FIML (Full Information Maximum Likelihood Estimation) and MICE(Multivariate Imputation by Chained Equations), under MCAR, MAR, and MNAR mechanisms. Overall, the results showed that listwise deletion and mean imputation performed poorly compared to other recommended missing data procedures. The better performance of EM, FIML, and MICE was more noticeable under MAR compared to MCAR. With the non-ignorable missing data, this study showed that missing data methods did not perform well. In particular, this problem was noticeable in slope-related estimates. Therefore, this study suggests that if missing data are suspected to be non-ignorable, developmental research may underestimate true rates of change over the life course. This study also suggests that bias from non-ignorable missing data can be substantially reduced by considering rich information from variables related to missingness.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.1
• /
• pp.1-8
• /
• 2013

In this paper, we predicted sea-level rise for RCP 4scenarios(RCP 2.6, RCP 4.5, RCP 6.0, RCP 8.5). To calculate sea-level rise, a semi-empirical method was used and it needs atmospheric temperature rise for each scenario. According to the results, the sea-level has been rising steadily in all scenarios. By 2050 the maximum difference of sea-level rise between the scenarios was within 0.08 m, but its difference was showed more than 0.5 m in 2100. The values of sea-level rise for RCP 2.6, RCP 4.5, RCP 6.0, RCP 8.5 scenarios are 0.87 m, 1.21 m, 1.02 m, 1.36 m, respectively. In the case of RCP 8.5, the slope of atmospheric temperature rise since 2060 was very steep compared to the other scenarios so that the maximum difference of sea-level rise between the scenarios will be much larger after 2100. Estimated by a simple approximation, the maximum difference of sea-level rise can be more than 1.2 m in 2120.

• Journal of the Korean Chemical Society
• /
• v.17 no.5
• /
• pp.337-345
• /
• 1973

The nonstoichiometry of the iron oxide system has been studied by analyzing the weight loss of a sample, measured by using a quartz microbalance, in a temperature range from $0^{\circ}C$ to $1200^{\circ}C$ under oxygen pressures from $10^{2}mmHg$ to $10^{-4}mmHg$. The Y values of the formula, $FeO_{1+\gamma}$, that have been obtained by this means for various conditions of temperature and pressure in this range are considered to be more accurate than values obtained by methods requiring thste quenching of the sample before measurements are made. The plots of log Y vs $log PO_2$ (or $log Y =_n log PO_2$) show linearity and n calculated from the slope of the plot is about 1/10 at $1000^{\circ}C$, indicating a difference between the nonstoichiometric and oxidation mechanisms. The condition for the formation of stoichiometric FeO was determined to be $1200^{\circ}C$ under $10^{-3}mmHg$ of $O_2$ and the composition of the oxide under standard conditions was $FeO_{1.11185}$. As in general more oxygen dissolves into the oxide system at lower temperatures and higher oxygen pressures, the deviation from stoichiometric FeO is greater under those conditions. A comparison of the change in conductivity of the sample indicates that full phase transition does not take place with conductivity transition.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.2
• /
• pp.27-46
• /
• 2016

In this study, the parameter-elevation regressions on independent slopes model-Kongju National University(PRISM-KNU) system was developed to interpolate monthly precipitation data. One of the features of PRISM-KNU is that it can adjust the allowable range of slope according to the elevation range in the equation representing a linear relationship between the precipitation and elevation. The parameter value of the model was determined by using the optimization technique, and the result was applied to produce monthly precipitation data with a spatial resolution of $1{\times}1km$ from 2000 to 2014 in South Korea. In the result, the Kling-Gupta Efficiency for model evaluation was over 0.7 in 86% of the total cases simulated. In addition, a dramatic change in the spatial pattern of precipitation data was observed in the output of the Modified Korean PRISM, but such a phenomenon did not occur in the output of the PRISM-KNU. This study confirmed the appropriateness of the PRISM-KNU, and the result showed that the spatial consistency of the data produced by the model improved compared with that produced by the Modified Korean PRISM. It is expected that the PRISM-KNU and its output will be utilized in various studies in the future.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.16 no.4
• /
• pp.36-46
• /
• 1979

Using N_ Ch silicon gate technology . the capacitors and transistors with various dimenssion were fabricated. Although the applied process was somewhat standard the conditions of ion implantation for the gate were varied by changing the implant energies from 30keV to 60keV for B and from 100 keV to 175keV for P . The doses of the implant also changed from 3 $\times$ 10 /$\textrm{cm}^2$ to 5 $\times$ 10 /$\textrm{cm}^2$ for B and from 4$\times$ 10 /$\textrm{cm}^2$ to 7 $\times$ 10 /$\textrm{cm}^2$ for P . The D. C. parameters such as threshold voltage. substrate doping level, the degree of inversion, capacitance. flat band voltage, depletion layer width, gate oxide thickless, surface states, motile charge density, electron mobility. leakage current were evaluated and also compared with the corresponing theoretical values and / or good numbers for application. The threshold voltages measured using curve tracer and C-V plot gave good agreements with the values calculated from SUPREM II which has been developed by Stanford University process group. The threshold vol tapes with back gate bias were used to calculate the change of the substrate doping level. The measured subthreshold slope enabled the prediction of the degree of inversion The D. C. testing results suggest the realized capacitors and transistors are suited for the memory applications.