• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.572-575
• /
• 2007

In this paper, we proposed a internal antenna for Quad band for GSM/DCS/USPCS/WCDMA Handset. Antenna Structure is designed to PIFA type. Antenna planed two independence patterns to reduce the size for efficiency and used shoting pin and inverse seven_type slit. Also they miniaturized the antenna construction electronic length for duty. furthermore, they designed and producted the antena height for 5w and ground term for 40*80mm. It is because they have wondered the thickness of terminal. used of for reduce size efficiently. The radiation pattern characteristic of antenna is compared and analyzed E-plane and H-plane at 920MHz, 1800MHz.

• Journal of information and communication convergence engineering
• /
• v.15 no.4
• /
• pp.199-204
• /
• 2017

A compact dual-band half-ring-shaped (HRS) bent slot antenna fed by a coplanar waveguide for wireless local area network (WLAN) and worldwide interoperability for microwave access (WiMAX) applications is presented. The antenna consists of two HRS slots with different lengths and widths. The two HRS slots are connected through an arc-shaped slit, and the upper HRS slot is bent in order to reduce the size of the antenna. The optimized dual-band HRS bent slot antenna operating in the 2.45 GHz WLAN and 3.5 GHz WiMAX bands is fabricated on an FR4 substrate with dimensions of 30 mm by 30 mm. The slot length of the proposed dual-band slot antenna is reduced by 35%, compared to a conventional dual-band rectangular slot antenna. Experimental results show that the proposed antenna operates in the frequency bands of 2.40-2.49 GHz and 3.39-3.72 GHz for a voltage standing wave ratio of less than 2, and measured gain is larger than 1.4 dBi in the two bands.

• Fisheries and Aquatic Sciences
• /
• v.16 no.1
• /
• pp.15-23
• /
• 2013

Normal embryonic development at a constant temperature ($18^{\circ}C$) has been described for the Siberian sturgeon Acipenser baerii (Acipenseriformes). Hormone-induced spawning and artificial insemination were performed to prepare embryonic batches for embryologic examination. After insemination, early cleavages of the Siberian sturgeon embryos continued for 7 h post-fertilization (HPF), showing the typical pattern of uneven holoblastic cleavage. Blastulation and gastrulation began at 9 HPF and 19 HPF, respectively. Epiboly formation (2/3 covered) was observed at 25 HPF during gastrulation. Neurulation was initiated with the formation of a slit-like neural groove from the blastopore at 33 HPF. During neurulation, the primary embryonic kidney (pronephros) and s-shaped heart developed. The embryos underwent progressive differentiation, which is typical of Acipenseriform species. A mass hatching was observed at 130 HPF, and the average total length of the hatched prolarvae was 10.5 mm. The hatched prolarvae possessed a typical pigment plug (yolk plug). The results of this study are valuable not only as a reference guide for the artificial propagation of Siberian sturgeon in hatcheries but also as the basis for the derivation of developmental gene expression assays for this species.

• The Korean Journal of Physiology
• /
• v.11 no.2
• /
• pp.67-71
• /
• 1977

This study was undertaken to investigate the effect of cingulate cortical ablation upon gastric secretion and its components in rats. 23 male rats were divided into the cingulate(N=9) and the operated control(N= 14) groups. Cingulate cortex was ablated through a slit-shaped opening(1 mm in width, 5 mm in length) which was made symmetrically on both sides of, and parallel to, the sagittal suture by removing a bone flap from frontal bone on each side. In the operated control group, the surgical procedure was ended by the removal of the bone flap. Under light ether anesthesia, experimental animals were placed in a restraining jacket of fine mesh wire and gastric juice was collected for 5 hours via a canula which had been inserted through the anterior abdominal wall into the antral portion of the lumen of the stomach. Volume of the gastric juice was measured, and total acid output and free acid output were titrated with 0.04 N NaOH solution by using phenolphthalein and Topfer's reagent at indicator, and chloride ion output was estimated by means of chloridometer. Results obtained were that volume, total acid output, free acid output and chloride ion output of the gastric juice were higher significantly in the cingulate group than in the operated control group. It is inferred from the above results that the cingulate cortex exerts a fascilitatory influence upon gastric secretion and acid output in rats.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.10
• /
• pp.5968-5973
• /
• 2014

The gate location in injection molding has a significant influence on the quality and productivity. Therefore, injection molding CAE is used to determine the gate location. With increasing injection molding CAE and the adoption of a 3D mesh, which takes more computation time for analysis, gate location optimization in the shortest time and least resources is the most challenging issue. In this paper, we propose a methodology for optimization based on the flow length to consider the flow balance and weld line. In addition, the flow balance is obtained in the disc-type plate while the weld lines exit the slit-holes to avoid a stress concentration.

• Journal of Environmental Science International
• /
• v.21 no.8
• /
• pp.931-938
• /
• 2012

The effects were investigated of different lengths and numbers of slitwalls in drainless containers on growth and change in soil moisture volumes on the growth of Diffenbachia amoena 'Marianne' and Begonia rex. Drainless containers filled with amended soil, with square shape ($240mm{\times}240mm$) were used, as well as three different sets of slitwalls (2, 4 or 8, respectively) in addition to non-slitwall containers. Two indoor foliage plants were grown in slitwall containers in randomized blocks with 3 replications in greenhouse conditions, from March to September, 2009. Soil moisture volumes per container were measured by weighing containers every 2 hours during the day. The change in soil moisture volumes showed considerable differences among slitwalls tested in comparison to control containers before and after twice-weekly irrigation. Particularly, the differences in the S2 (195mm, slitwall 2) containers were significantly greater than other containers tested. For Diffenbachia amoena 'Marianne', plant height, length of leaf, dry weight and fresh weight were higher with S2 containers than with those grown in other containers tested. The Begonia rex with the best quality in terms of plant height, length of leaf and width of leaf was grown in S8 (360mm, slitwall 8) containers. Particularly, statistical analysis has indicated that shoot fresh weights of Begonia rex grown in S8 were 3-fold higher than those grown in CS8 containers. The different results obtained within the two species led us to hypothesize a species-specific influence on indoor foliage plant performance. However, plants of both species grown in slitwall containers showed good results compared with plants grown in non-slitwall containers.

• Fashion & Textile Research Journal
• /
• v.20 no.2
• /
• pp.202-209
• /
• 2018

This study examined thermo-physiological responses according to the design change of construction site working clothes (control (C) working clothes; prototype (P) working clothes). We measured rectal temperature, skin temperature, micro-climate within the clothes and sweat rate. In the evaluation of physiological functionality, based on pattern improvement in working clothes, P working clothes showed significantly lower rectal temperatures, trunk and thigh skin temperatures than C working clothes. It is preferable that rectal temperature should be kept low during work that is not favorable to an increase in body temperature. P working clothes were more physiologically functional than C working clothes. In addition, P working clothes showed significantly lower temperatures in the trunk and thigh parts in a micro climate temperature. We could explain that the side seam zipper on the pants and the gusset on armpit parts create an air permeability effect of lowering the temperature of micro-climate. Aggressive ventilation through the slit of the garment is an important factor for the restoration of the physiological function of the worker at rest between work. Sweat rate showed a higher level in C working clothes than P working clothes. When working in a hot environment, workwear needs to be designed so that the worker is not exposed to thermal stress. Therefore, it was evaluated that the P work clothes used in this study alleviated the physiological burdens of heat.

• Journal of Fashion Business
• /
• v.21 no.1
• /
• pp.58-73
• /
• 2017

The purpose of this study was to examine the need of the eyelash design area and the changes of an eye image according to eyelash design. Methodology included both a theoretical research and an empirical research. The theoretical research reviewed previous researches and technical books. The empirical research divided eye shapes, complemented the defect of eye shapes, and examined resulting image changes. A mechanical way was performed for treatment because it was more efficient than a manual way. A J-curl type was used. Eye length was divided into five and the point was determined. The length and density of curl were changed in each point to maximize a treatment effect. As a result, eye images were changed as follows. First, round eyes became stable. Slit eyes became vivid and soft. Wide-set eyes became intelligent and narrow-set eyes became smooth. Large eyes were naturally gradated and small eyes became larger. Double-eyelid eyes became stable and elegant and single-eyelid eyes became gentle and soft. Bulging eyes became easy and soft and sunken eyes became smooth. Peaked eyes became gentle and soft and sleepy eyes became strong and vivid. Based on the findings, eyelash design can play a role in changing an image according to eye shapes. In particular, a speed eyelash extension device to extend eyelash can reduce working hours and gradate only by angle control. It can complement the defect of eyes according to the design of each shape and change into a better image.

• Transactions of the Society of Information Storage Systems
• /
• v.1 no.2
• /
• pp.150-154
• /
• 2005

The effects of track format on the inter-track crosstalk of holographic ROM system are investigated. To quantify the effect of inter-track crosstalk for various track width and pitch, we defined Signal to Crosstalk noise Ratio(SCR) as a criterion. A numerical simulation is used to obtain the SCR as a function of track widths and pitches. We compared different 4 track widths having 0.3, 0.4, 0.5, and 0.6 ${\mu}m$ considering resolving power of lens and recording density. The simulation results show that the SCRs for each track width are maximized at the track pitch which has the value of 0.72, 0.72, 0.74, and 0.5 ${\mu}m$ respectively. Next, for the three sets with track width-pitch(0.4-0.72, 0.5-0.74, 0.6-0.8 ${\mu}m$) which showed the maximum SCR, we set a minimum pit length so that all sets have a DVD equivalent data density and compared RF signals passed from the slit. The simulation results show that when the track width, pitch, and minimum pit length have 0.5, 0.74, and 0.4 ${\mu}m$ respectively, the difference between the maximum and minimum value of the RF signal showed the greatest value. Also, we investigated RF signal in case of using an amplitude inversion mask, which transmitted regions are inversed against the conventional mask. The simulation results show that the better RF signal may be obtained by using an amplitude inversion mask.

• The Research Journal of the Costume Culture
• /
• v.16 no.2
• /
• pp.263-277
• /
• 2008

In picture bible, the picture is helpful for showing story more vividly and specifically and it is helpful for finding the meaning of bible hidden behind familiarity. It plays the role of the most powerful testimony and expression, with which human provides himself. The purpose of study was to grasp the relation among historical background of the middle age, human's characteristic and symbolic color by considering the fact that the costume expressed in Maciejowski Bible, which is a picture bible of the middle age and observing type, color and decoration of costume. Among 46 folios organizing Maciejowski Bible, 129 pictures explaining the Book of Genesis, the Book of Exodus, the Book of Leviticus, the Book of Numbers, the Book of Deuteronomy, the Book of Joshua and the Book of Judges, which belong to the former 400 years of the old Testament, were analyzed for people's costumes. The pictures shown in Maciejowski Bible portrays object, costume and behavior on the background of France of the 13th century so we can find out the precious natures of middle age's costume, weapon and armor. Especially, the portrait about finger armor of chain mail attached in hauberk becomes the outstanding evidence that can encroach the discussion over whether it was used in the end of 1300s. Regarding costumes of main characters, they wore chemise and braies as underwear, wore tunic or cotte having various lengths from the length reaching knee to the length reaching 8round as basic costume and wore mantle with different-colored lining and hose with various colors. In the war picture, we can see hauberk made with chain mail and cyclas with long slit, which was worn over hauberk, barrel helmet, norman helmet and steel school cap. Regarding cap. man usually wore coif, beret, shade-shaped cap, straw hat and woman wore the decoration using veil and hairlace and used the method to wrap whole hair with net. As the colors used in the costume of the picture bible, scarlet, blue, green and brown were usually used in order. They usually wore costumes decorated splendidly with the colors haying hish brightness and chroma.