• 제목/요약/키워드: slender

검색결과 889건 처리시간 0.024초

학공치, Hyporhampus sajori (Temminck et Schlegel) 자치어(仔稚魚)의 골격 발달 (Ostelogical Development of Larvae and Juveniles of Hyporhampus sajori (Teleostei: Hemiramphidae))

  • 이승주;김용억;한경호
    • 한국어류학회지
    • /
    • 제13권3호
    • /
    • pp.173-180
    • /
    • 2001
  • 1991년 5월 27일 경북 포항시 청하면 방어리 소재의 포항수산종묘시험장 앞 해안에서 채집한 학공치, Hyporhampus sajori (Temminck et Schlegel) 수정란에서 부화한 자어를 사육하면서 발육단계에 따라 골격의 발달과 정을 관찰하였다. 부화 직후, 전장이 7.00~8.50 mm (평균 7.80 mm, n=5)인 자어(仔魚)는 두개골(頭蓋骨), 내장골(內臟骨)및 견대골(肩帶骨)의 골화가 시작되었며, 부화 후 8일째 전장 10.07~14.75 mm (평균 13.07 mm, n=5) 자어(仔魚)는 치골(齒骨)이 골화하기 시작하여, 앞쪽으로 가늘고 길게 골화가 진행되었다. 부화 후 14일째, 전장이 17.62~19.35 mm (평균 19.20 mm, n=5)인 자어(仔魚)는 담기골의 골화가 일어났으며, 척추골(脊椎骨)에 41개의 가늘고 긴 늑골(肋骨)이 골화하였다. 부화 후 16일째, 전장이 18.90~24.72 mm (평균 23.00 mm, n=5)인 자어(仔魚)는 3개의 상미측골(上尾軸骨)이 골화하였다. 골격의 골화는 섭이와 호흡에 연관된 약골(顎骨)과 기개골에서 골화가 시작되어, 부화 후 37일째에 전장이 32.37~ 44.95 mm (평균 35.25 mm, n=5)인 치어(稚魚)에 이르러 모든 골격이 완성되었다.

  • PDF

헤디드 바, 고장력 철근 및 CFRP 바로 전단보강된 세장 고강도콘크리트 보의 전단 거동 평가 (Shear Behavior of Slender HSC Beams Reinforced with Stirrups using Headed Bars, High Strength Steels, and CFRP Bars)

  • 양준모;권기연;최홍식;윤영수
    • 콘크리트학회논문집
    • /
    • 제19권6호
    • /
    • pp.717-726
    • /
    • 2007
  • 일반 강도의 철근을 고강도콘크리트 구조물에 사용하는 경우, 고강도콘크리트의 취성을 보완하고 그 성능을 십분 활용하기 위해서는 많은 양의 철근이 요구된다. 이는 곧 철근의 과밀 배근이나 자중의 증가와 같은 구조, 시공상의 문제를 야기할 수 있다. 따라서 고강도콘크리트 부재에 적합한 새로운 보강 재료 혹은 공법이 필요한 것이다. 이에 본 연구에서는 100 MPa의 고강도콘크리트를 사용하여 4개의 실물크기 보 시험체를 제작하고, 전단보강재를 달리하여 전단 거동에 대한 효과를 관찰하기 위해 실험을 수행하였다. 4개의 시험체는 각각 일반 철근, 고장력 철근, 헤디드 바, CFRP 바를 전단 스터럽으로 사용하였으며, 이 중 2개의 시험체에는 강섬유를 콘크리트에 혼입하여 그 효과를 관찰하였다. 고장력 철근의 사용은 전단철근에 의한 전단력과 부착력의 증가로 인해 전반적인 전단 성능의 향상을 가져왔다. 헤디드 바로 전단 보강된 부재의 경우에도 헤디드 바의 상당히 높은 정착강도로 인해서 우수한 전단 거동을 보였다. 하지만 본 실험에서 사용된 CFRP 바의 경우, 부착력이 매우 떨어져 전단보강재로서 적합하지 못한 것으로 나타났다. 강섬유 보강 콘크리트를 통해 부재의 연성 및 균열 제어 능력이 향상되었다.

비선형 동적 해석을 이용한 비내진 상세 RC 골조의 지진거동 특성 분석 (A Study on the Seismic Response of a Non-earthquake Resistant RC Frame Using Inelastic Dynamic Analyses)

  • 정성훈;이광호;이수권
    • 콘크리트학회논문집
    • /
    • 제22권3호
    • /
    • pp.381-388
    • /
    • 2010
  • 이 논문에서는 내진상세가 적용되지 않은 RC골조의 지진 거동 특성을 파악하였다. 해석 대상 건물은 내진 규준의 적용을 받지 않고 중력하중만을 고려하여 설계되었다. 원형철근이 주철근으로 사용되었으며, 부재는 낮은 수준의 전단력을 견딜 수 있는 최소한의 스터럽이 사용되어 코어 부분의 구속효과는 거의 없다. 평면비정형성을 가진 건물의 경우, 푸쉬오버 해석을 통해서는 비틀림으로 인한 평면상에서 연단부의 손상집중을 파악할 수 없으므로 비선형 동적해석을 사용하는 것이 바람직하다. 섬유요소를 이용한 비선형 동적해석은 양방향 지진하중과 비틀림 거동의 영향을 받는 RC골조의 거동을 성공적으로 예측할 수 있었다. 하지만, 보다 진보된 응답 예측을 위해서는 부착 미끄러짐과 같은 보-기둥 접합부의 국부거동을 정밀하게 나타내는 모델링 요소의 개발이 필요하다.

지역별.연령별 중국 성인여성(地域別.年齡別 中國 成人女性)의 체형구성 요인(體型構成 要因)과 유형 비교 연구(類型 比較 硏究) (A Comparative Study on Chinese Adult women's constitutional components and Somatotype Characteristic)

  • 위혜정;손희순
    • 패션비즈니스
    • /
    • 제10권5호
    • /
    • pp.58-73
    • /
    • 2006
  • The purpose of this study was to improve of fittness and coverage rate of exporting domestic clothing to China for Chinese Adult Female. For study, It was measured 1381 female women aged between 19 and 50 who resident in Beijing and Shanghai in China. as a sample, 1360 female women was seleted for development of apparel sizing system. As for the method of this study was made of 111 items by indirect measures done during Jun. 23 $\sim$ Aug. 7, 2004. Data analysis were processed by SPSS WIN 10.0 Program was used to for technical statistical analysis, correlation analysis, factor analysis, ANOVA(t-test and F-test), duncan's multiple test. The result was as follows: Chinese Adult women's constitutional components determined by factor analysis, six components could be identified: factor 1:constitutional obesty and width size, factor 2: longistudinal body size, factor 3: shoulder form and size, factor 4: longistudinal upper body size, factor 5: under body size, factor 6: shoulder dropping. According to the Women's Wear Specifications(GB/T 1335.2-1997) by drop, body types of Chinese Adult female was classified into six types, it was Y, A, B, C and Z, D. In order, A type as standard somatotype(49.8%), B type(26.9%), Y type (18.8%), C type(2.9%). Y type had the average height and shoulder, bust girth. They were slimmer in overall terms. A type had a normal obesity and body size in height, shoulder, bust girth. They were average Chinese Women. B type had a smaller then A type. They were more obes and thick waist girth. C type had the highest obesity, the widest shoulder and bust girth, and thick waist girth. The characteristics of each body type following the body type structure factor are Y-type for slender type, A-type for standard type, B-type for slightly large type, and C-type for obese type. For each region, the Beijing area had in the order of A-type, Y-type, B-type and C-type, and the Shanghai area had in the order of A-type, B-type, Y-type and C-type.

PHENOL이 미고정(未固定) 조상아세포(造象牙細胞)에 미치는 영향(影響)에 관(關)한 위상차현미경적(位相差顯微鏡的) 연구(硏究) (A PHASE CONTRAST MICROSCOPIC STUDY OF THE EFFECT OF PHENOL ON UNFIXED ODONTOBLAST)

  • 홍경택
    • 대한치과보철학회지
    • /
    • 제17권1호
    • /
    • pp.47-59
    • /
    • 1979
  • In order to study the morphologic changes of the unfixed odontoblasts suspended in phenol solution of several different concentrations, the author carried out the extraction of lower incisor of S-D strain rats to collect the odontoblasts, and the cells obtained were suspended immediately in saline solution. After observing the odontoblasts in fresh state, the saline solution was substituted with 0.125%, 0.25% 0.5%, 1% and 2% diluted phenol solutions. The morphologic changes were examined with phase contrast microscope at intervals of 10, 30, and 60 minutes. The results were as follows: 1. In saline solution the odontoblast showed cytoplasmic swelling, slender cytoplasmic process, thick rim nuclear membrane with increased dark contrast, and prominent nucleoli and chromatin granules with lapse of time intervals. In accordance with time intervals, blisters appeared in the supranuclear zone and increased its size and moved outward of the cytoplasmic membrane resulting detachment from the cell membrane. The phase dark cytoplasmic granules were increased in its dark contrast and in its size. 2. In 0.125% and 0.25% phenol solution, the odontoblasts and its nucleus shrunk immeidately and its contrast of cellular components was increased. With the lapse of time, the phase-dark granules in cytoplasm were aggregated, and several blisters were formed in and out of the cells. The outline of cytoplasmic membrane was also obscured. 3. In 0.5% phenol solution, the necleus shrunk at once, but soon after it revealed karyolysis accompanying dark contrast of neclear components such as nuclear membrane, nucleoli, and chromatin granules. On the contrary, the cytoplasmic granules showed aggregation and increased dark contrast, small and large blisters were formed in and out of the odontblasts and the outline of cytoplasmic membrane became obscured. 4. In 1% phenol solution, it showed shrinkage of odontblasts and its nuclei with thick rim nuclear membrane, aggregation of chromatin granules and occasional karyorrhexis. The dark contrast of cytoplasmic granules was increased and aggregated each other. But the blister formation could not be found. 5. In 2% phenol solution, it showed the shrinkage of odontoblasts and pyknotic nuclei with increased dark contrast of nucleoli and chromatin granules. The number of cytoplasmic granules was decreased by aggregation. But the blister formation could not be found as in 1% phenol solution.

  • PDF

Comparison of Grain Quality Traits between Japonica Rice Cultivars from Korea and Yunnan Province of China

  • Yu, Teng-Qiong;Jiang, Wenzhu;Ham, Tae-Ho;Chu, Sang-Ho;Lestari, Puji;Lee, Jeong-Heui;Kim, Myeong-Ki;Xu, Fu-Rong;Han, Longzhi;Dai, Lu-Yuan;Koh, Hee-Jong
    • Journal of Crop Science and Biotechnology
    • /
    • 제11권2호
    • /
    • pp.135-140
    • /
    • 2008
  • Improving eating quality is one of the most important objectives in japonica rice breeding programs in Yunnan Province of China. Eating quality and its relevant traits of nine Korean and 11 Yunnan rice cultivars were comparatively analyzed in this study. The grain shape of most Yunnan japonica rice cultivars have a relatively slender shape and are slightly larger than Korean rice cultivars. Palatability value of cooked rice of Yunnan rice cultivars was significantly lower, while the protein content of Yunnan rice cultivars was significantly higher than that of Korean cultivars. Peak viscosity and breakdown viscosity of the Yunnan rice cultivars were significantly lower, while setback viscosity of the Yunnan rice cultivars was significantly higher than in Korean rice cultivars. Palatability value of cooked rice was negatively correlated with protein content and setback viscosity but positively correlated with peak viscosity, breakdown viscosity, and cool paste viscosity. Through multiple linear regression analysis, an equation for estimating palatability value(PV) of cooked rice based on quality traits was generated as dependent only upon protein content(PC), PV=139.024-(10.865$\times$PC) with an $R^2$ value of 0.822. The results suggest that reducing protein contents should be the major target in improving eating quality of Yunnan japonica rice cultivars through integrated approaches of both cultivar development and appropriate cultural practices. Genetic similarities among cultivars based on DNA markers which had been identified as associated with grain quality seemed not to be directly related to PV.

  • PDF

중국 성인여성용 유방유형 및 특성에 관한 연구(제 II보) - 상해지역 20대 전반 여성을 중심으로 - (The study on the breast types and characteristics of Chinese female adults. (Ver. 2) - Focused on the female college students in Shanghai -)

  • 차수정;손희순
    • 패션비즈니스
    • /
    • 제14권1호
    • /
    • pp.57-75
    • /
    • 2010
  • This study is done in Shanghai area by sample survey of female college students in their lower 20s. Through direct contact survey, this study collected and analyzed information on figure to understand feature of breasts and measurements of body to provide base information to improve product of brassiere for adult female in China. Data was analyzed by using SPSSWIN 13.0 Program and SAS 9.0. 1. From a result of factor analysis on 40 items of measures to derive the components of the shape of the breast, 6 factors were derived such as the factors to show the obesity of the bust, to show the ratio of the upper and lower area of the lower bust, droop and volume, to show the internal shape and broadness of the bust, to show the location and vertical size of the bust, to show the protrusion of the bust and the eternal shape of the bust. 2. From a result of classification on the shape of the breast of the Chinese women in their early 20s, 4 types were selected. Type 1 is the protrusion type that a woman has a broad drooped breast due to the development in the upper and lower parts of the chest as well as the highest height, a high degree of obesity in the bust part, big volume and much protrusion. Type 2 is the hemisphere type that the degree of obesity in the breast is second to Type 1 and a breast is located at a region higher than Type 1 as the degree of obesity in the breast is secondly highest, the lower part of the bust is bigger than the Type 1 and the degree of being broad and drooped is second to Type 1. Type 3 is the cone type with a breast of being drooped and broad a little bit and a certain degree of a volume. Type 4 is the flat type with the smallest value in the item that shows the obesity of the bust area and with the smallest value in the R$\ddot{o}$hrer index to have the small and slender body type for the bust area, which is somewhat flat due to a low slope at the internal side of the bust.

한국산 꿩 송과샘의 부화후 발달에 관한 형태학적 연구 (Morphological Study on the Post-hatching Development of the Pineal Gland in Korean Pheasant (Phasianus colchicus Karpowi))

  • 이영훈;김인식;양홍현
    • 한국가금학회지
    • /
    • 제28권3호
    • /
    • pp.267-274
    • /
    • 2001
  • 부화후 성장하는 꿩 송과샘의 미세구조적 발달을 구명하고자 1일령, 1, 2 및 6개월령을 희생시켜 광학 및 전자현미경을 이용하여 다음과 같은 결과를 얻었다. 광학현미경적 관찰에서 꿩 송과샘의 실질은 피막에 의해 싸여 있고 여기에서 기시하는 결합조직에 의해 불완전한 소엽 (lobule)으로 구분되었다. 송과샘실질은 소엽상과 불완전한 여포살이었으며, 둥근 핵과 염색성이 옅은 송과샘세포와 약간 짙고 길쭉한 핵을 갖는 지주세포로 구성되어 있었다. 전자현미경적 관찰에서 송과샘실질에는 길쭉한 송과샘세포와 지주세포가 소엽의 중심부를 향해 배열되어 있었고 광학현미경에서 소엽의 중심부에는 매우 불규칙한 막성층판복합체이나 포상구조물이 출현하였다. 실질은 비교적 밝은 솔과 샘세포와 짙은 핵을 갖는 지주세포로 구성되어 있었다. 송과샘세포는 잔유성 광수용세포의 형태를 취하였는데, 그 첨단부위의 밝고 팽대된 세포질에는 세포소기관이 빈약하나 섬모, 약간의 유리리보솜과 사립체가 출현하였다. 첨단부위세포질과 핵위부위세포질 사이의 좁아진 경부는 지주세포와 연접복합체를 이루고 목부위세포질내에는 미세소관이 풍부하였다. 핵주위세포질은 풍부하고 다수의 사립체, 잘 발달된 골지장치, 풍부한 과립형질내세망 및 유리 리보솜 등을 함유하고 있었다. 또한 핵아래부위세포질에서 여포의 기저부위로 기저돌기를 내고 있었다. 송과샘세포의 핵아래부위 세포질 및 기저돌기에서 60∼90nm 크기의 치밀소포가 관찰된 것이 특이하였고 짙은 핵을 갖고 긴 독기를 갖는 것이 특징이었다. 이상의 결과는 꿩 송과샘세포가 광수용능은 것의 없고 분비기능을 주로 수행하는 소견이었으며, 성숙 꿩의 송과샘의 미세구조적 연구를 확인하여 번식기와 비번식기에 따른 비교연구가 수행되어야 할 것으로 사료된다.

  • PDF

고강도강재 단주의 압축강도 및 잔류응력 평가 (Compressive Strength and Residual Stress Evaluation of Stub Columns Fabricated of High Strength Steel)

  • 이철호;김대경;한규홍;김진호;이승은;하태휴
    • 한국강구조학회 논문집
    • /
    • 제24권1호
    • /
    • pp.23-34
    • /
    • 2012
  • 본 연구에서는 인장강도 800MPa급 고강도강재(HSA800)의 단주 중심압축실험과 편심압축실험을 통해 균등압축과 휨-압축 부재의 강도를 평가하여 현행 강구조기준(KBC2009, AISC2005)의 적용성 여부를 검토하였다. 또한 잔류응력의 계측을 통하여 강재 항복강도와 잔류응력과의 상관성 여부도 검토하였다. 고강도강재와 일반강재의 국부좌굴 거동 차이의 여부를 확인하기 위하여 중심압축실험에 SM490 강재로 제작된 비교실험체도 포함시켰다. 강도로 무차원화한 판폭두께비와 판 단부의 지지조건을 주요변수로 하여 실험을 실시하였다. 편심압축실험은 HSA800 강재만을 대상으로 하였으며, 휨-압축의 조합력을 받는 부재의 P-M 상관관계를 알아보기 위해 가력 편심거리를 조정하여 다양한 P-M 조합에 대해 강도평가 실험을 수행하였다. 잔류응력은 중심압축실험에 사용된 H형단면 실험체를 대상으로 비파괴실험법인 압입법에 의해 가력 이전에 그 크기와 분포를 측정하였다. 실험결과 중심압축을 받는 모든 HSA800 단주는 판 단부의 지지조건 및 판폭두께비 조건에 따른 현행 강구조기준의 설계강도를 충분히 발휘하였다. 편심압축을 받는 실험체 역시 현행 설계기준의 P-M 상관관계를 충분히 안전측으로 충족하였다. 본 연구에서도 잔류응력의 크기는 강재의 항복강도와 무관하다는 선행연구결과와 합치하는 잔류응력 측정값이 얻어졌다.

장스팬 비닐하우스의 폭설에 의한 붕괴방지법 연구 (Collapse Prevention Method of Long-span Plastic Greenhouse for Heavy Snow)

  • 김보경;이수헌;김진욱;신경재
    • 한국강구조학회 논문집
    • /
    • 제22권1호
    • /
    • pp.67-74
    • /
    • 2010
  • 최근 기상이변에 따라 폭설로 인한 비닐하우스의 붕괴가 빈번해져서 농가의 피해가 증가하고 있다. 하지만 이에 대한 대책연구는 미약하여 매년 농가의 피해는 되풀이 되고 있다. 그리하여 본 연구에서는 고강도 변단면 부재를 이용한 모듈을 적용하여 근본적인 구조체의 붕괴를 방지하고, 인장타이재를 이용한 추가적인 보강을 통하여 비닐하우스의 붕괴를 방지하고자 한다. 비닐하우스 프레임의 경우 처짐설계보다는 강도설계에 의해 단면이 지배되므로 모멘트가 최대가 되는 부분에 고강도의 변단면 부재를 적용한다. 현재 설치된 비닐하우스의 형태는 아치의 형태를 하고 있으나, 구조적으로는 곡선부(보)와 직선부(기둥)가 불연속의 형상을 하고 있어 연직하중에 대해 아치거동보다는 프레임거동을 하는 취약한 구조시스템이다. 직선부재(기둥) 상단에 폭설 시에만 임시적으로 인장타이재를 추가함으로써 모멘트로 저항하던 프레임 구조체를 축력에 저항하는 타이아치형 구조체로의 단기적인 변화를 유도하여 구조체의 내력을 증가시키고자 한다. 고강도 변단면 부재를 이용하면 조합강도비가 10~30% 정도 감소하였으며, 인장타이재를 이용하여 추가보강하면 조합강도비가 절반 이하로 감소하였다.