• 한국지역사회생활과학회지
• /
• 제23권2호
• /
• pp.189-198
• /
• 2012

This study aim was to understand the effects of the change of the sleeve cap height on the sleeve cap line and the sleeve appearance by making nine different sleeve cap height patterns. When a subject sews the virtual and real garments with this, it provides data base through which she can make the suitable sleeve by conducting a comparative analysis of the appearance and cross-sectional diagram and grasping the relation between the sleeve cap line ease and the shape of the sleeve. As a result of the analysis of the image of 3D virtual garment, the shape of the armscye and the position of the bust line and sleeve baseline, the sleeve cap height and the sewing ease of the sleeve cap line affect on the shape of the sleeve and the armscye. Although the real garment is slightly different from the virtual garment they have shown similar tendency. Therefore, if the 3D virtual clothing system is used appropriately, it is possible to expect various study results in the apparel field without making real garments.

• 한국의류학회지
• /
• 제21권6호
• /
• pp.1060-1071
• /
• 1997

The purpose of this study is to identify the effect of clothing cues(sleeve and skirt width, length) on female impressions. The experimental materials developed for this study are a set of stimuli and response scales. The stimuli are 16 pictures manipulated with sleeve and skirt width · length variations by computer drawing. The experimental design consists of 3 factorial design: (1) sleeve shapes(plain, upper expanded, below expanded, all expanded) (2) skirt width (wide, narrow) (3) skirt length(long, short) The 7-point semantic differential response scale designed for visual evaluation of female' s impression formation on sleeve shape and skirt width · length is 27 bipolar adjectives. The results of this study are as follows: 1. When we analize the impressions of female figure by sleeve shape and width · length of skirt, it becomes clear that maturity, modernity, attention, elegance and tenderness are proved to be important. Among these five factors, maturity, modernity and attention are identified as more important ones. 2. Sleeve shape have an effect on all factors except maturity and the effects of sleeve on the four factors are not striking. ' Width of skirt are most influential to the maturity and attention, but it does not have any effect on modernity. However two factor, that is width of skirt and sleeve have an effects on modernity, attention and tenderness. ' The length of skirt has an effects on the tenderness, elegance and modernity, but it dose not have any effect on attention. But width and length of skirt have an effects on attention, tenderness and modernity The length of skirt and sleeve have an effect on tenderness.

• 한국의류산업학회지
• /
• 제12권5호
• /
• pp.619-625
• /
• 2010

The purpose of this research is to analyze the shapes of blouse with above-elbow sleeves according to arm movements. The shapes include five types of the arm movement(basic posture, reach forward 45, 90, and reach lateral 45, 90) in the stand-posture, which were made by different adaptability of clothes. Experiments were conducted to figure out the dressed shape through 3-D measurement Vivid 910, and also to investigate the area of the shape of sleeves on the section map and the diagonal length of the block made by the basic section line in lateral part of sleeve with Rapid Form 2004, a software for 3-D shape analysis. The Data were analyzed by factor analysis, Anova, Duncan test, t-test. The results of this study were as follows: First, the area of sleeve was briefed 3 factor; front, center, back in sleeve. Second, there were different effect of arm movement, section level and part of shapes in the area of sleeve. Third, the diagonal length was briefed 4 factor; back, back-center, front-center, front. Forth, after t-test, there were statistically significant between the reach forward and lateral and between the angles of arm reach.

• 복식
• /
• 제42권
• /
• pp.223-230
• /
• 1999

Dressmaking which is defined as the process of changing two-dimensional cloth into three-dime-nsional clothes needs a lot of joining parts. Particularly sleeve needs a more curved surface than other joining parts owing to shape of the top of arms. Easing is used to control the fullness along the seam-line to create the fullness curved shape of the sleeves and it plays an important role in increasing three-dimensional constru-ction power. unfortunately sufficient data regarding effective easing conditions to increase three-dimensional construction power of sleeve are not available. Therefore the author tried to investigate the effective easing conditions to increase three-dimensional construction power of sleeve by cap height. Easing construction power of sleeve by cap height. Easing contraction made by different angles on the sleeve cap curve line previous work were examined and the effective easing conditions according to the variation of angles were determined. This study contains the following objectives. Firstly to obtain the easing contraction ratio in sleeve according to the above easing conditions. Secondly to investigate the three-dimensional construction power or sleeve by the factors of easing contraction. Thirdly to determine for each sleeve the effective easing conditions on the basis of the calcuative easing contraction ratio in the sleeve patterns by cap heights.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1073-1074
• /
• 2011

The loss is most important problems for the practical applications of permanent magnet synchronous motor(PMSM). In this paper, rotor sleeve and stator shape design of high speed permanent magnet motor for loss reduction. First, this paper found optimum sleeve thickness for calculation eddy current loss on the basis of analytical method, because eddy current is influenced by conductivity of material and area. Then, stator shape design is changed as maintain same slot area for reducing stator core loss. Finally, this paper compared analytical result with optimum sleeve thickness obtained from finite element(FE) method, and stator core loss is calculated from FE method.

• 한국의류학회지
• /
• 제27권2호
• /
• pp.219-228
• /
• 2003

The purpose of this study were to examine the characteristics of arm types proposed in the previous study and to present sleeve patterns according size and shape of 4 arm types. 31 direct and indirect items were measured. The subjects for this study were 132 females of twenties. The results were as follows. 1. All of the direct measurements showed significant difference by the arm types. especially at the front armhole part. Such a.: the items of arm gradients, armhole sizes belong to the indirect measurements made clear difference also. 2. By the discriminant analysis, 9 items including underarm length, front armhole girth, upper arm girth, degree of elbow point-wrist point discriminated arm type by the hit ratio of 90.4% Item related to shape of arm rather than size made a sharp distinction. 3. Through the examination of existing patterns and wearing tests on the subjects among 4 groups, sleeve patterns classified by the arm type were suggested.

• 소성∙가공
• /
• 제3권3호
• /
• pp.302-319
• /
• 1994

A new approach to die shape optimal design in bimetal extrusion of rods is presented. In this approach, the design problem is formulated as a constrained optimization problem incorporated with the finite element model, and optimization of the die shape is conducted on the basis of the design sensitivities. The combinations of the core and sleeve materials.

• 한국의상디자인학회지
• /
• 제10권2호
• /
• pp.105-115
• /
• 2008

Men's outer wear, such as jackets and coats appeared since the 16th century. They have been changed from doublets, coats, justaucorps, tail-coats, frock coats and morning coats to contemporary men's suits. Since the early 17th century, sleeve patterns of men's outer jackets had been mostly two-pieces close fitted patterns. The purpose of this article is to compare sleeve patterns of various jackets, which appear in various historic costume books. Armhole measurements, sleeve head measurements, amounts of ease, armhole depths, armhole widths, crown heights, sleeve width and sleeve angle had been compared to find out the differences among patterns of different times and styles. Coming to the present, the difference between top sleeve and under sleeve became more obvious, and the sleeve angle became less curvy. Another interesting point is that there had been considerable amounts of ease, which is the difference between sleeve head measurements and corresponding armhole measurements. It is because the sleeve has been attached to the armhole not by seam but by string. It is believed that the present sleeves have more natural curve and shape compared to the past.

• Progress in Superconductivity
• /
• 제3권2호
• /
• pp.218-223
• /
• 2002

The void volume fraction of cables is one of the effective parameters to characterize the joints of superconducting magnet. Because electrical resistance and cooling stability in the CICC (Cable-in-Conduit Conductors) joint are governed by the void volume fraction, it should be controlled constantly in the termination of cable. The change of cross-section shape in the cable was fecund during the unidirectional compaction of terminal sleeve. The non-uniform thickness of the sleeve after compaction is expected because the loading is not taxi-symmetric, and the plastic flow is also not axi-symmetric. The CICC was compacted from 45% void volume fraction to 15% by using two-piece compaction jig, which could be pressed mini-directionally. Commercial code, ABAQUS, was used to analyze the plastic flow in the sleeve during the unidirectional compaction. The increment of radius of curvature of compaction jig could minimize the change of the deformed shape of cables. The calculated results were agreed with the experimental observations.

• 복식
• /
• 제50권7호
• /
• pp.235-247
• /
• 2000

This study was conducted to consider the formation of sleeves from the point of view that dress is one of expressive arts. The formative meaning of a sleeve and its chronological formation according to its formative changes as an evidence showing the Internal changes of social culture were examined, centering around day dress of England in the 11th to 19th centuries. Then, sleeves were formatively classified and their aesthetic values were considered to help do formative, aesthetic expression of dress design in the present times. Literatures and references concerning the history of domestic and foreign dress were used as a method of study. The results of this study are summarized as follows. 1. In the women's dress, the formation of the sleeve focuses on aesthetic decoration. This means that in the androgentric society the status of women are subordinate socioculturally. 2. Sleeves were classified into a fitted shape and a extension shape according to the aesthetic formation. The fluted shape expressed the beauty of body with emphasis old natural body, whereas the extension shape represented aesthetic expression of decoration. 3. The formation of a sleeve has influence on forming an image of dress by making the silhouette of dress natural or distorted, expresses the harmonious beauty of the whole dress, and produces the expressional beauty that gives a distinct characteristic to a dress.