• 한국농공학회지
• /
• 제45권1호
• /
• pp.74-82
• /
• 2003

In this paper, an experimental program was undertaken to test the analysis on Component and mechanical characteristics for crushed stone of excavated Rocks from Sandstone, Shale, Mudstone, for use as a new source of aggregate. Physical and mechanical properties, required for aggregate materials, of major constituents of rock wastes including Sandstone, Shale, Mudstone, Felsite, Basalt, Marl were measured in the laboratory Test results showed that the Shale, Felsite, Basalt tested in this study might possibly be used for construction aggregates. In case of Sandstone and Mudstone, some physical properties such as rock strength were generally adoptable but the aggregate characteristics were lower than required.

• 한국농공학회지
• /
• 제45권1호
• /
• pp.83-90
• /
• 2003

In order to offer some fundamental data for recycling the excavated rocks, the component and mechanical characteristics was investigated for the excavated rocks, by means of X-ray diffraction analysis, strength test, slacking test and abrasion test were performed. It appeared that the unconfined compressive strength and the elastic wave velocity were the highest in the sound rock. The dissipation rate by stability tests was found to be high in the case of the slacking index of 98% because of more bedding and more clay minerals. The apparent specific gravity of some crushed aggregate was decreased because they included easily weathered minerals while both the absorption and the abrasion were increased. The results in this study were expected to be useful for recycling the excavated rocks as a concrete aggregate.

• 한국지반신소재학회논문집
• /
• 제20권3호
• /
• pp.1-10
• /
• 2021

본 연구는 성토구조체 현장실험을 통해 포항 지역의 제3기 이암을 도로 노체 재료로 활용하기 위한 가능성을 검토하는 제시하는 것이다. 이 이암은 신생대 제 3기층인 연암퇴적층에 분포하고 있는 미고결화 암석으로 슬레이킹, 팽윤 현상, 전단강도 저하와 같은 물리적 문제와 산성배수라는 화학적 문제가 발생한다. 여러 복합적 문제 해결하기 위해 실내 배합 시험을 진행하였으며 제 3기 이암(90%)과 복합슬래그(제강 70%, 고로 30%)와 중화·코팅제 처리의 최적 배합 조건을 도출했으며, 이를 실증하기 위해 실제 규모의 도로 성토구조체를 시공하여 구간별 현장 시험을 진행했다. 사전처리구간은 최적 배합 조건 설계로 인해 안정이 유지되는 반면, 무처리구간은 자연 풍화가 빠르게 진행되어 구조적 문제 발생이 우려되었으며, 가적치구간은 중화·코팅제 효과가 확인됨에 따라 임시 적치 시기에 적용 가능함을 확인했다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.159-166
• /
• 1999

One of the most general methods that can evaluate the rippability is the seismic exploration. However, most field engineers have hardly used the seismic exploration. Instead of using the seismic exploration, they have usually used rock hammer and naked eyes to confirm the degree of rippability for soil, ripping rock and blasting rock. Therefore, to excavate the ground rationally, it is required to establish a quantitative criterion that can be used for distinguishing rippability. In this study, we find out the characteristics of rock strength through laboratory and field tests. The weathering condition of rock exposed to air due to excavation of soil layer and the variation of rock strength caused by weathering were investigated. A relationship between rock strength values that are obtained from uniaxial compression test, slaking durability test, point load test, schmidt hammer test and absorption ratio test is analyzed. The relationship is expressed in a form of equation by which we can evaluate the rock strengths obtained from simple laboratory and field tests. To evaluate rippability in a reasonable manner, a quantitative approach is proposed and a check list of rippability is developed based on the proposed methodology. It is recommended to modify the proposed method for evaluation of rippability in the field.

• 한국환경복원기술학회지
• /
• 제6권3호
• /
• pp.56-68
• /
• 2003

The main purpose of this study was to verify the shore margin protection effect of the root system of Salix gracilistyla Miq. developed from direct sticking cuttings on wetland, through the measurement of root growth and comparison of soil slaking rate depending on the planting method applied to shore-marginal slope. Comparison of growth rate and soil dispersion rate was made between five planted slope and one naked slope. The planting methods applied to the planted slope were (a) horizontally layed burying of stick(45cm) bundle (b) horizontally layed covering the slope with sticks (c) horizontally fencing with normal cuttings(20cm) (d) elected sticking of normal cutting at equal distances (e) random scattering short cuttings(3-4cm). As results, the most effective planting method was horizontally layed burying, and in order to increase its efficiency scattering the live stem chips in 2-3cm on the slope is recommended. The growth of root was negatively regressive to the distance from water floor.

• 한국환경복원기술학회지
• /
• 제6권3호
• /
• pp.69-78
• /
• 2003

The main purpose of this study was to verify the shore margin protection effect of the root system of Salix gracilistyla Miq. developed from direct sticking cuttings on wetland, focusing on the effect of the root system reducing soil particle dissociation rate in water. The soil dissociation rate was examined through slaking tests with cylindric pure soil column at maximum particle density and the same size column of root reinforced soil. The dry weight of remained soil was measured after 5, 10, 15, 30minutes and 1, 6, 12, 24, 48hours inundation. As results, the soil particles began to dissociate severely at 10 minutes and only 10% of soil particles were left after 25minutes inundation. The stable slope angle of pure soil was $36^{\circ}$after 24 hours. On the other hand, the columns of root reinforced soil were stable even after 24hours, being dissociated only 7.2% of soil particles. So, it was revealed that the root system was very effective materials protecting more than 80% of soil particle from dissociation in inundation.

• 한국분말재료학회지
• /
• 제23권3호
• /
• pp.221-227
• /
• 2016

Waste oyster shells create several serious problems; however, only some parts of them are being utilized currently. The ideal solution would be to convert the waste shells into a product that is both environmentally beneficial and economically viable. An experimental study is carried out to investigate the recycling possibilities for oyster shell waste. Bulk ceramic bodies are produced from the oyster shell powder in three sequential processes. First, the shell powder is calcined to form calcium oxide CaO, which is then slaked by a slaking reaction with water to produce calcium hydroxide $Ca(OH)_2$. Then, calcium hydroxide powder is formed by uniaxial pressing. Finally, the calcium hydroxide compact is reconverted to calcium carbonate via a carbonation reaction with carbon dioxide released from the shell powder bed during firing at $550^{\circ}C$. The bulk body obtained from waste oyster shells could be utilized as a marine structural porous material.

• 한국문화재보존과학회:학술대회논문집
• /
• 한국문화재보존과학회 2002년도 제15회 발표논문집
• /
• pp.21-31
• /
• 2002

고건축물에서 구조재, 결합재, 방수재, 마감재 등의 용도로 매우 중요하게 사용된 강회다짐 재료에 관한 사용기록을 정리하고 문화재 보수 및 복원시 현장에서 느끼는 강회다짐재의 사용상 문제점을 검토하여 다음과 같은 개선방안을 제언한다. 1) 생석회를 현장에서 피우는 과정에서 발생하는 품질의 균일성에 관한 문제점을 보완하기 위해서는 강회다짐용 재료로 순도 높은 소석회를 사용하는 것이 바람직하다. 2) 강회시공시 발생하는 품질의 불균일성을 고려하여 균일한 혼합을 위한 믹서, 계량시의 오차를 줄이기 위한 Premix형태의 강회다짐재 및 다짐작업의 균일성을 확보하기 위한 다짐기계의 사용을 적극적으로 검토하여야 한다. 3) 지붕 강회다짐충의 해체 및 시공시 추가적인 구조물의 손상을 방지하기 위해서 적절한 가설구조물의 사용을 의무화 하여야 한다. 4) 문화재 수리 표준 품셈과 문화재 수리 표준 시방서에 규정된 재료 및 시공절차에 관한 내용을 구체적이고 명확히 규정할 필요성이 있다.

• 정보처리학회논문지B
• /
• 제11B권5호
• /
• pp.545-554
• /
• 2004

단일 분류기에 비해 높은 분류성능을 얻기 위해 다수의 분류기들을 결합하여 사용하는 방법은 폭넓게 이용되어 온 기술이다. 하나의 다중 분류기 시스템을 구성하는 일은 다음 두 가지 문제들을 가지고 있다. 첫째는 어떻게 기반 분류기들을 생성하느냐 하는 것이고 둘째는 이들의 예측결과를 어떻게 결합하느냐 하는 것이다. 본 논문에서는 Bagging, Boosting, Stacking 등 기존의 대표적인 다중 분류기 시스템들의 특징을 살펴보고, 문서 분류를 위한 새로운 다중 분류기 시스템들인 Stacked Bagging, Stacked Boosting, Bagged Stacking, Boosted Stacking들을 제안한다. 이들은 Bagging, Boosting, Stacking과 같은 기존 다중 분류기 시스템들의 장점들을 결합한 일종의 혼합형 다중 분류기 시스템들이다. 본 논문에서는 제안된 다중 분류기 시스템들의 성능을 평가하기 위해 MEDLINE, 유즈넷 뉴스, 웹 문서 등의 문서집합을 이용한 문서 분류 실험들을 전개하였다. 그리고 이러한 실험결과를 통해 제안한 혼합형 다중 분류기 시스템들은 전반적으로 기존 시스템들보다 우수한 성능을 보이는 것으로 나타났다.

• 지질공학
• /
• 제34권1호
• /
• pp.67-105
• /
• 2024

This study compares the quartzites of four quartzite units: The Fagfog Quartzite, Dunga Quartzite (member of the Robang Formation), Pandrang Quartzite (member of the Kalitar Formation) and the Chisapani Quartzite. The analysis shows variations in flakiness and elongation, as the Fagfog Quartzite displays low flakiness whereas the Pandrang and the Chisapani have moderate and the Dunga Quartzite has shown variations. The density values of the four quartzite units remain consistent, indicating uniform physical properties and porosity levels. However, bulk density values differ among the quartzites, suggesting variations in particle arrangement, porosity, and density. Regarding strength measures, the Pandrang and the Chisapani Quartzite have higher strength characteristics as compared to the Fagfog and the Dunga Quartzites. The Pandrang Quartzite has the highest average point load strength index, classifying it as "Extremely Strong". The resistance to impact and crushing forces varies among the quartzites, with lower Aggregate Impact Value (AIV) and Aggregate Crushing Value (ACV) indicating higher strength and durability. Durability tests show that the Fagfog Quartzite has high durability against slaking, with a slight decrease observed after the fifth cycle. The Dunga Quartzite shows varying degrees of weathering, while the Pandrang and the Chisapani Quartzite have minimal weight changes, indicating strong resistance to weathering. Magnesium sulfate soundness tests indicate high durability and resistance to degradation for all four units. The Los Angeles abrasion value (LAAV) tests indicate favorable resistance to abrasion for the majority of the Fagfog, Dunga, and the Pandrang Quartzites samples, while Chisapani Quartzite shows more variability in LAAV values. The Pandrang Quartzite shows a higher proportion of elongated particles but lower flakiness index values as compared to Fagfog and Dunga Quartzites while Chisapani Quartzite stands out with a significantly higher presence of flaky particles and lower elongation index values. Mechanically, the Fagfog and Dunga Quartzite show higher strength and better resistance to abrasion and freeze and thaw. The Pandrang Quartzite shows moderate resistance to crushing and sudden effect, while the Chisapani Quartzite has variable resistance to effect. This comparative study emphasizes the diversity and complexity of quartzite rock types, showing the need for comprehensive characterization and assessment to determine their suitability for specific applications.