• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.1
• /
• pp.43-48
• /
• 2008

Purpose: This study is to evaluate reliability of geometrical optics properties of spectacle lenses by using ISO and the medical instrument standard of KFDA, which are being sold in Korea. Methods: We used samples of three hundred and ninety eight spectacle lenses of eight company in total. Refractive indices of each samples which were used in experiment were classified into three groups of medium index (1.55~1.56), high index (1.60~1.61) and extra high index (1.67). Results: Conformity of refractive power was 81.61% in total spectacle lenses. The results showed that thickness conformity 90%, appearance conformity 85.18%, size conformity 96.23% and optical center point conformity 99.50% in total. Conclusions: We found that they deviated from the permitting value in many spectacle lenses on refractive power. The results of errors on prism power, surface inspection and optical center point showed small values in total products. In experiment of lens size and thickness, the bulk of indication rates and conformities of samples deviated from the permitting errors.

• Korean Journal of Optics and Photonics
• /
• v.24 no.1
• /
• pp.29-38
• /
• 2013

In this paper, the illumination performances of three freeform lenses optimally designed for a point source were investigated for several LEDs with different source sizes, and also the tolerance characteristics of the lenses were analyzed. For comparison, two lenses with different sizes were designed with a divergent illumination model, and the last one was done with an overlapped illumination model. As the LED source size increased, the illuminance uniformity decreased more strongly, and the influence of a source misalignment on illumination performance became insignificant. However, the variation of LED radiation characteristics had strong effect on the illumination performance, irrespective of LED source size. Even though the lens based on a divergent illumination model showed superior performance compared to the lens based on an overlapped illumination model, the latter was less sensitive to the variation of LED radiation characteristics.

• Korean Journal of Optics and Photonics
• /
• v.32 no.6
• /
• pp.259-265
• /
• 2021

Recently, lens manufacturing and assembly technology has greatly improved. However, tight requirements of manufacturing and assembly lead to an increase in cost and manufacturing time, and in some cases the performance of an optical system may deteriorate depending on the operating environment's conditions, such as temperature or vibration. In addition, the use of a compensator is an effective method to reduce sensitivity in an ultra-precision optical system, but in the case of a small lens, such as that in an endoscope, it is difficult to use a compensator due to the size limitation of the lens barrel. Therefore, minimizing lens sensitivity is the most important technology in lens design. For this reason, there have been various attempts to reduce the lens sensitivity, and there is a trend to add functions to reduce the sensitivity in the lens design S/W. In this paper, we introduce a design technology that minimizes lens sensitivity. We first design a lens with quite good performance, then analyze the sensitivity of this lens, make a multi-configuration with high-sensitivity element error, and then reoptimize it. We prove with an example that this design technique is very effective.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1500-1503
• /
• 2007

Auto-stereoscopic 3D of 60-view number is made using slanted lenticular lens array and LCD of 15.1 inch diagonal size and 3200 by 2400 pixel numbers. Due to its large view number, smooth motion parallax is observed and the visual fatigue is reduced.

• Journal of The Korean Astronomical Society
• /
• v.29 no.1
• /
• pp.1-8
• /
• 1996

When we follow the lines of the trajectory of photons which intersect the circle, the circle may suffer some deformation as approaching to the observer. We consider an infinitesimal light bundle suffering gravitational bending. We examine the deformation of the deflected light bundle due to the gravitational lens. The size of the deformation is expressed in terms of the focal length of the gravitational lens.

• 연구논문집
• /
• s.32
• /
• pp.23-34
• /
• 2002

Up to now, collimators have teen generally produced by handwork and only a few companies have produced by semi-automatic system. Under this situation, automatic system for assembly of optical collimators has risen as a mast essential technique in the development of optical communication components. In this study, it was constructed to develop optical collimators with high functionality and we manufactured optical collimators with a GRIN rod lens and spherical lens using automatic system. Therefore, we worked a performance test through a comparison of collimators made by automatic system and handwork with angle augment, bean size. Also we selected a optimum assembly condition of GRIN rod lens and spherical lens. As a result, it brought a reduction of the tact time and an improvement of an efficiency and a productivity of optical collimators, therefore it was found that automatic system was indispensable for materialization of optical collimators with high functionality.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.12
• /
• pp.1133-1139
• /
• 2014

This paper proposes a simple method to improve a sensitivity of a straightness measurement system for a linear stage, which is applied to a system based on a geometric optic method. An optical system for this method is composed of a corner-cube retro-reflector, a ball-lens and a twodimensional position sensitive detector (2D PSD). The effectiveness of the proposed method was examined theoretically, and verified experimentally using a prototype measurement system. The results show that the measuring sensitivity was dependent on the size of the ball-lens and the setup position of PSD from the ball-lens, and that the proposed method is efficient method to improve the measuring sensitivity.

• Journal of Korean Ophthalmic Optics Society
• /
• v.6 no.2
• /
• pp.17-21
• /
• 2001

We analyzed the luminance in the visual light region and the size of pupil by the luminance to estimate an UV-A line cut efficiency in the lens. The size of pupil by the luminance(L) was given by ${\Phi}=d-e{\cdot}tanh(f{\cdot}logL)$ and the transmittance efficiency value of a size of pupil was given by $T_r(r)=1-gr^2+hr^4$. We derived the absolute cut efficiency value ${\alpha}$ and the exclusion index $b=(1-{\alpha}){\times}100%$ about the UV-A in the $320{\sim}400nm$ regions. The ${\alpha}$ and b values were obtained respectively 0.018, 0.31, 0.273, 0.153 and 98, 69, 72, 85% of Uv-cut Lens, CR-39, red color and blue color.

• Korea-Australia Rheology Journal
• /
• v.19 no.3
• /
• pp.171-176
• /
• 2007

LCD-BLU (Liquid Crystal Display-Back Light Unit) of medium size is usually manufactured by forming numerous dots with $50{\sim}300\;{\mu}m$ in diameter by etching process and V-grove shape with $50\;{\mu}m$ in height by mechanical cutting process. However, the surface of the etched dots is very rough due to the characteristics of the etching process and V-cutting needs rather high cost. Instead of existing optical pattern made by etching and mechanical cutting, 3-dimensional continuous micro-lens of $200\;{\mu}m$ in diameter was applied in the present study. The continuous micro-lens pattern fabricated by modified LIGA with thermal reflow process was tested to this new optical design of LGP. The manufacturing process using LIGA-reflow is made up of three stages as follows: (i) the stage of lithography, (ii) the stage of thermal reflow process and (iii) the stage of electroplating. The continuous micro-lens patterned LGP was fabricated with injection molding and its test results showed the possibility of commercial use in the future.

• Journal of the Optical Society of Korea
• /
• v.8 no.4
• /
• pp.174-181
• /
• 2004

Various kinds of systems, that can do target recognition and position detection simultaneously by using infrared sensing detectors, have been developed. In this paper, the detection system TRSS (Thermal target Recognition by Spiral Scanning) adopts linear array shaped uncooled IR detector and uses spiral type fast scanning method for relative position detection of target objects, which radiate an IR region wavelength spectrum. It can detect thermal energy radiating from a 9 m-size target object as far as 200 m distance. And the maximum field of a detector is fully filled with the same size of target object at the minimum approaching distance 50 m. We investigate two types of lens systems. One is a singlet lens and the other is a doublet lens system. Every system includes one aspheric surface and free positioned aperture stop. Many designs of F/1.5 system with ${\pm}5.2^{\circ}$ field at the Efl=20, 30 mm conditions for single element and double elements lens system respectively are compared in their resolution performance [MTF] according to the aspheric surface and stop position changing on their optimization process. Optimum design is established including mechanical boundary conditions and manufacturing considerations.