• 한국자동차공학회논문집
• /
• 제13권5호
• /
• pp.64-74
• /
• 2005

The effect of fuel injection spray on engine performance has been known as one of the major concerns for improving fuel economy and reducing emissions. In general, reducing the spray droplet size could prevent HC emission in gasoline engine. As far as PFI gasoline engine is concerned, the mixture of air and fuel may not be uniform under a certain condition, because breakup and production of spray droplets are made in a short distance between the fuel injector and intake valve. This study, by constituting PFI gasoline spray system, was performed to study the transient spray characteristics and dynamic behavior of droplets from two-holes two-sprays type injector used in DOHC gasoline engine. Mean droplet size and optical concentration in accordance with various conditions were measured by LDPA and CCD camera. Through this study, the variation of drop size and optical concentration could be used for understanding the behavior of unsteady spray was declared and the existing the small droplets between each pulse spray could be estimated caused to the development of wall film was conformed.

• Journal of Mechanical Science and Technology
• /
• 제19권12호
• /
• pp.2312-2320
• /
• 2005

The aerodynamic effects of leading-edge accretion can raise important safety concerns since the formulation of ice causes severe degradation in aerodynamic performance as compared with the clean airfoil. The objective of this study is to develop a numerical simulation strategy for predicting the particle trajectory around an MS-0317 airfoil in the test section of the NASA Glenn Icing Research Tunnel and to investigate the impingement characteristics of droplets on the airfoil surface. In particular, predictions of the mean velocity and turbulence diffusion using turbulent flow solver and Continuous Random Walk method were desired throughout this flow domain in order to investigate droplet dispersion. The collection efficiency distributions over the airfoil surface in simulations with different numbers of droplets, various integration time-steps and particle sizes were compared with experimental data. The large droplet impingement data indicated the trends in impingement characteristics with respect to particle size ; the maximum collection efficiency located at the upper surface near the leading edge, and the maximum value and total collection efficiency were increased as the particle size was increased. The extent of the area impinged on by particles also increased with the increment of the particle size, which is similar as compared with experimental data.

• Advances in concrete construction
• /
• 제13권6호
• /
• pp.433-450
• /
• 2022

The conventional disposal methods of waste tires are harmful to the environment. Moreover, the recycling/reuse of waste tires in domestic and industrial applications is limited due to parent product's quality control and environmental concerns. Additionally, the recycling industry often prefers powdered rubber particles (<0.60 mm). However, the processing of waste tires yields both powdered and coarser (>0.60 mm) size fractions. Reprocessing of coarser rubber requires higher energy increasing the product cost. Therefore, the waste tire rubber (WTR) less favored by the recycling industry is encouraged for use in construction products as one of the environment-friendly disposal methods. In this study, WTR fiber >0.60 mm size fraction is collected from the industry and sorted into 0.60-1.18, 1.18-2.36-, and 2.36-4.75-mm sizes. The effects of different fiber size fractions are studied by incorporating it as fine aggregates at 10%, 20%, and 30% in the self-compacting rubberized concrete (SCRC). The experimental investigations are carried out by performing fresh and hardened state tests. As the fresh state tests, the slump-flow, T500, V-funnel, and L-box are performed. As the hardened state tests, the scanning electron microscope, compressive strength, flexural strength and split tensile strength tests are conducted. Also, the water absorption, porosity, and ultrasonic pulse velocity tests are performed to measure durability. Furthermore, SCRC's energy absorption capacity is evaluated using the falling weight impact test. The statistical significance of content and size fraction of WTR fiber on SCRC is evaluated using the analysis of variance (ANOVA). As the general conclusion, implementation of various size fraction WTR fiber as fine aggregate showed potential for producing concrete for construction applications. Thus, use of WTR fiber in concrete is suggested for safe, and feasible waste tire disposal.

• 한국실내디자인학회논문집
• /
• 제19권2호
• /
• pp.243-251
• /
• 2010

Based on theories and case analysis, the present research concerns the deduction of useful results about the basic stage for setting up a planar plan for children's play therapy facility, which cures children's psychological problems such as social maladaptation by means of play rather than language. The case analysis was sub-categorized into movement in each area, relative position among areas, and the size of each room. Detailed investigations were made concerning: First, Adjacent areas of each area. Second, Movement plan, which was sub-categorized into the movement of therapists and that of the children receiving therapy and guardians; area was sub-categorized into management area, therapy area and service area. Third, the size of each area measured was calculated to be expressed as the percentage of the total size. The result is as follows: (1) As for adjacent areas, in some cases management area and service area were adjacent, with isolated therapy area; whereas in the other cases, service area and information area, which is a part of management area, were placed along the doorway, with therapy area between them and therapist area, which is the other part of management area, behind them. (2) As for movement, the movement of therapists and that of children receiving therapy were same; whereas the movement of guardians was allowed only up to the middle part of the therapy facilities, and there was almost no entry of guardians into the play therapy rooms located in the inner parts. This is because they do not show the details of their therapy for children to guardians. (3) As for size, the area of independent facilities were similar; whereas institutional facilities in general had larger waiting room and unlike independent facilities, were of diverse size.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권8호
• /
• pp.4006-4020
• /
• 2018

In recent years, one of the most remarkable 5G technologies is massive multiple-input and multiple-output (MIMO) system which increases spectral efficiency by deploying a large number of transmit-antennas (eg. tens or hundreds transmit-antennas) at base station (BS). However, conventional massive MIMO system using single-polarized (SP) transmit-antennas increases the size of the transmit-array proportionally as the number of transmit-antennas increases. Hence, size reduction of large-scale transmit-array is one of the major concerns of massive MIMO system. To reduce the size of the transmit-array at BS, dual-polarized (DP) transmit-antenna can be the solution to halve the size of the transmit-array since one collocated DP transmit-antenna deploys vertical and horizontal transmit-antennas compared to SP transmit-antennas. Moreover, proposed DP massive MIMO system increases the spectral efficiency by not only in the space domain but also in the polarization domain whereas the conventional SP massive MIMO system increases the spectral efficiency by space domain only. In this paper, the comparative performance of DP and SP massive MIMO systems is analyzed by space division multiple access (SDMA) and space-polarization division multiple access (SPDMA) respectively. To analyze the performance of DP and SP massive MIMO systems, DP and SP spatial channel models (SCMs) are proposed which consider depolarized propagation channels between transmitter and receiver. The simulation results show that the performance of proposed 32 transmitter (Tx) DP massive MIMO system improves the spectral efficiency by about 91% for a large number of user equipments (UEs) compare to 32Tx SP massive MIMO system for identical size of the transmit-array.

• 농업과학연구
• /
• 제45권4호
• /
• pp.591-600
• /
• 2018

The use of genetically modified (GM) crops has increased continuously over the world, and concerns about the potential risks of GM crops have also risen. Although, until now, GM crops have not been cultivated commercially in Korea, it is necessary to develop technology for the safe evaluation of GM crops. In this study, we investigated the influence of gene flow from GM to non-GM soybeans by the size of the pollen donor. In the experimental design, GM soybeans were placed in the center as a pollen donor and non-GM soybeans were placed in four directions as the pollen receivers. Three sizes of pollen donor were designed as $90cm{\times}90cm$, $180cm{\times}180cm$, and $360cm{\times}360cm$. A total 22,719 seeds were collected from non-GM soybeans, and 14 hybrids were finally obtained through herbicide resistance screening and PCR analysis. The highest hybridization rate was 0.78% at a distance of 15 cm from a $360cm{\times}360cm$ GM pollen donor, and the farthest distance of hybridization was 180 cm from a GM pollen donor which was $360cm{\times}360cm$ in size. Ten hybrids were found among the 14 hybrids at the $360cm{\times}360cm$ pollen donor size, 3 hybrids at $180cm{\times}180cm$, 1 hybrid at $90cm{\times}90cm$. From these results, it could be concluded that with the larger pollen donor size, more hybridization occurred in soybeans.

• Asian Journal of Atmospheric Environment
• /
• 제4권3호
• /
• pp.115-140
• /
• 2010

Great concerns about atmospheric aerosols are attributed to their multiple roles to atmospheric processes. For example, atmospheric aerosols influence global climate, directly by scattering or absorbing solar radiations and indirectly by serving as cloud condensation nuclei. They also have a significant impact on human health and visibility. Many of these effects depend on the size and composition of atmospheric aerosols, and thus detailed information on the physicochemical properties and the distribution of airborne particles is critical to accurately predict their impact on the Earth's climate as well as human health. A single particle analysis technique, named low-Z particle electron probe X-ray microanalysis (low-Z particle EPMA) that can determine the concentration of low-Z elements such as carbon, nitrogen and oxygen in a microscopic volume has been developed. The capability of quantitative analysis of low-Z elements in individual particle allows the characterization of especially important atmospheric particles such as sulfates, nitrates, ammonium, and carbonaceous particles. Furthermore, the diversity and the complicated heterogeneity of atmospheric particles in chemical compositions can be investigated in detail. In this review, the development and methodology of low-Z particle EPMA for the analysis of atmospheric aerosols are introduced. Also, its typical applications for the characterization of various atmospheric particles, i.e., on the chemical compositions, morphologies, the size segregated distributions, and the origins of Asian dust, urban aerosols, indoor aerosols in underground subway station, and Arctic aerosols, are illustrated.

• 한국컴퓨터산업학회논문지
• /
• 제7권3호
• /
• pp.145-154
• /
• 2006

본 논문에서는 프로그램 최적화를 위해 개선된 추론적 부분 중복 제거(SPRE) 알고리즘을 제안했다. 본 논문에서 제안한 SPRE 기법은 컴파일러의 프로필링 기법 등을 통해 얻어진 실행 빈도에 대한 정보를 이용하여 실행 속도 최적화를 수행한다. 제안하는 알고리즘의 첫 번째 목적은 프로그램 실행 시 요구되는 메모리의 감소이며 두 번째는 실행 시간을 감소시키는 것이다. 단지 프로그램의 실행 속도만을 고려하는 경우에는 메모리 요구가 크게 증가하기 때문에 메모리 감소에 대한 고려도 중요하다. 이것은 프로그램을 실행하는데 요구되는 메모리의 크기가 실행 속도 보다 더 중요한 임베디드 시스템에 적합한 최적화 기법이다. 본 논문에서는 제어흐름그래프를 네트워크로 구성하여 분할하는데 사용하는 Min-Cut 알고리즘을 구현한다.

• 대한지역사회영양학회지
• /
• 제2권2호
• /
• pp.197-205
• /
• 1997

This study was conducted to investigate adolescents' body size and their concerns and perceptions about body image. Group means of heights and weights were 171.5cm and 60.3kg for boys and 159.3cm and 52.3Kg for girls. Body Mass Index(BMI) of the subjects were 20.5 for boys and 20.6 for girls. Only 11.5$\%$ of subjects were overweight or obese, however 42.5% of subjects had experienced weight control, and the main reason for weight control was to lose weight(80.6$\%$). In concern for body image and frequency of eating distrubance ; females had more concern than males, the group who had attempted weight control had more concern than those who had not, and the group who were overweight had more concern than those who were under and normal weight. In perception about body image, using a set of nine figure drawings arranged from very thin to very heavy figures, subjects rated their current figure, considered figure(how they appeared to others), ideal figure, and attractive figure. For boys, the current, ideal, and most attractive figures were almost identical, but for girls, the ideal figure was significantly thinner than current figure and attractive figure was significantly thinner than current figure. The greater the preference for thinner figure as idal and attractive figure, the higher the concern for body image and frequency of eating distrubance. Thus it seems that a distorted perception of ideal body size affects adolescents' concern for body image and eating behaviors.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.357-360
• /
• 2007

An asset tracking using wireless sensor network is concerned with geographical locations of sensor nodes. The limited size of sensor nodes makes them attractable for tracking service, at the same time their size causes power restrictions, limited computation power, and storage restrictions. Due to such constrained capabilities, the wireless sensor network basically assumes the failure of sensor nodes. This causes a set of concerns in designing asset tracking system on wireless sensor network and one of the most critical factors is location uncertainty of sensor nodes. In this paper, we classify the location uncertainty problem in asset tracking system into following cases. First, sensor node isn't read at all because of sensor node failure, leading to misunderstanding that asset is not present. Second, incorrect location is read due to interference of RSSI, providing unreliable location of asset. We implemented and installed our asset tracking system in a real environment and continuously monitored the status of asset and measured error rate of location of sensor nodes. We present experimental results that demonstrate the location uncertainty problem in asset tracking system using wireless sensor network.