• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.491-494
• /
• 2003

An Automatic Water Level Measurement System has been developed in this study. It has the characteristics that it use lower power and solar power and it has the ability of sending data and remote-controlled by wireless MODEM this system was set up in the experimental site and was tested. Also, the management system for the water level data has been developed and will be used by instruments administrating reservoirs.

• 한국건설관리학회논문집
• /
• 제20권4호
• /
• pp.114-125
• /
• 2019

OSC (Off-Site Construction)는 공장 생산 기반의 새로운 건설 방식이다. 생산성과 경제성, 품질면에서 기존 방식에 우위에 있기 때문에 미국, 영국 등 세계 각지에서 OSC 관련 설계 및 생산 표준화, 운반 방법 등과 같은 연구들이 활발하게 진행되고 있다. 새로운 분야의 출현으로 합리적인 관리가 요구됨에 따라 건설사업관리 범위에 대한 분석이 필요한 실정이다. 따라서 이 연구는 CM/PM범위의 "작업 단계 수준"에서 연구 동향 및 관계를 분석하여 연구의 영역, 연구 간 관계, 현재의 연구에서 부족한 부분 등을 파악하였다. 이 연구에서는 2018년 9월3일까지 작업 단계의 수준 94개의 논문으로, OSC (CM/PM)연구에 대한 포괄적인 문헌 검토를 수행하였으며, 분석 결과 다음과 같다. (1) 2006년부터 작업 단계 수준의 연구가 빠르게 증가하고 있다. (2) Non-volumetric pre-assembly유형은 작업 단계에서 가장 크게 기여하고 있다. (3) 건축물 유형에서는 주거용: 주거의 생활, 품질 문제, 비주거: 경제 문제, 공장: 생산성 문제를 다루는 것으로 확인되었다. (4) Non-volumetric pre-assembly 유형은 주거용 및 비주거용 건축물에서 경제성에 대한 내용을 다루고 있었으며, 반면, Modular building 유형은 조립 품질에 관련된 연구가 수행되었다. (5) 2006년부터 프로젝트 관리 영역(예 : 품질, 인적 자원, 위험)이 확장되었다. 이 연구를 활용하면 OSC 새로운 연구 영역을 찾는데 도움이 될 것으로 예상된다. 추후 산업, 기업, 프로젝트 단계 수준까지 분석을 진행한다면, OSC 산업의 전반적인 연구 흐름 및 분야별 영역을 파악할 수 있을 것으로 판단된다.

• 환경영향평가
• /
• 제22권1호
• /
• pp.65-78
• /
• 2013

Since pursuing the pleasant life for people, there is an increase of desire to appreciate outstanding scenery with the difference in certain level for perception and understanding of human on landscaping, However, the quality of landscaping has become artificial with the pleasance to be declining due to the urbanization. This study was applied at the site around High One Resort area in Gohan-eup, Jeongseon-gun Gangwon-do for analyzing the areas sensitive to the landscaping change as well as degree of requirement for landscape management for forest landscape management with the focus on presenting the zoning method and the management class classification method. Even if the forest is the same, the function of it is different depending on land use or what resource is placed that the forestry function is found out to present the management plan for each forestry function in the subject site and the result of the management grade classification is analyzed in overlapping to the forestry function level. As a result, from the landscaping management requirement and visual absorption analysis, the result formulated for upper, middle and lower zones to classify the final forestry landscape management degree into 1-4 grades and the management plan is presented on the respective 1-4 grade area for each forestry function. By applying the technique to set the management grade, it was possible to formulate the result to provide the means for integrated management in consideration of the forestry function and management of forestry landscape and resources.

• 한국방재안전학회논문집
• /
• 제6권1호
• /
• pp.87-91
• /
• 2013

사고대비물질 취급자가 수립 제출하는 비상조치계획에 대한 현장이행 기준과 검토 절차를 마련하기 위해 공정안전보고서, 안전성향상계획서에 대한 심사내용과 기준 등을 조사하였다. 각각의 안전관리제도 운영 담당자의 의견과 검토과정에서 예상되는 문제점을 확인하였다. 현장이행과 검토에 대한 기준은 담당자의 업무수행 능력을 고려하여 고도의 전문성을 요구하기 보다는 보고서에 반드시 포함되어야 할 항목과 내용이 적정하게 작성되었는지 여부를 확인할 수 있는 내용위주로 제시하였다.

• 한국건설관리학회논문집
• /
• 제21권1호
• /
• pp.99-110
• /
• 2020

생산성은 산업차원, 혹은 기업차원에서 경제성장과 각 관련 생산 활동의 효율성을 측정할 수 있는 지표로서 건설 산업에서도 매우 중요한 지표이다. 기술적인 요인이 생산성에 큰 영향을 미치는 것이 사실이지만, 실제적인 건설 산업의 생산성 향상을 위해서는 다양한 생산성 영향요인에 대한 분석이 선행되어야 하며, 거시적인 관점에서 다루어지는 건설 산업 차원에서의 생산성 향상 노력보다는 프로젝트 차원에서의 생산성 향상 노력이 더욱 중요한 의미를 갖는다. 생산성 향상의 효율성을 높이기 위해서는 우선적으로 생산성에 영향을 미치는 요인들에 대한 분석 과정이 필요하며 개선효과가 큰 분야에 집중적으로 투자할 필요가 있다. 본 연구는 건설 산업의 질적 향상을 위해 건축공사 현장에서의 생산성 저하요인 도출 및 요인 간의 인과관계 구조분석을 통해 우선적 관리 요인을 선정함으로써 프로젝트의 효율적인 생산성 관리 활동을 위한 기초자료로 활용할 수 있도록 제공하고자 하였다.

• 한국안전학회지
• /
• 제21권5호
• /
• pp.53-59
• /
• 2006

Standard safety management costs can not be applied to each site with same rate, it is very difficult, because it depends on the experience, work method, work kind, work progress schedule, and hazard level of each construction company. Therefore, this study is to find out hazard level of each work kinds through questionnaire and interview and investigate analyze the status which standard safety management costs have been used. Also, this study is to show reasonable rates of standard safety management costs in construction industry and to set up countermeasures against those problem after reviewing its status in korea with in Japan and Europe. The domestic system of standard safety management costs is not considered in the foreign country, while only related subjective items have been investigated and evaluated for this study. This study is to investigate eleven project kinds of domestic system, first, and to investigate eleven items of apartment bldg, office, civil work such as bridge, tunnel, dam, plant etc, secondly. Additionally, three items of gymnasium, railway, particular steel tower are investigated in this study. Also this study is to investigate and analyze performed costs of presently processing worker finished work so that it shows a new reasonable rate against standard safety management costs in construction industry, in order to make basial data and material to be systemized.

• 경영과학
• /
• 제25권3호
• /
• pp.27-43
• /
• 2008

This study analyzes the changes of Gyeongju local society because of setting up low and intermediate level radioactive waste disposal site by using urban dynamics model. Specifically, after examining 'Gyeongju Long-Term Development Plan' announced in 2007, I establish the number of industries, population, gross local product, residents' income, and the long term employment condition as essential change-causing factors in Gyeongju local society based on the Big3 government project, and forecast it by using 'Gyeongju long-Term Development Plan' and all sorts of statistical data. In this stage, I assume 3 scenarios(basic, optimistic, and pessimistic view) to estimate the changes of local society more exquisitely, and scenarios are composed through mediation about variables of a growth rate and an inflow or outflow rate. The result shows that Gyeonaju local society would have growing changes by 2020. The essential change-causing factors are as follows. The case of population is estimated that it starts going down at the level of approximately 270 thousand by 2009, starts going up continuously after 2009, the year of completion of low and intermediate level radioactive waste disposal site, and increases from the level of about 300 thousand as minimum to 340 thousand as maximum in 2020. The estimates of other cases are made that the number of Industries has about 10 thousand increases, gross local product has almost 6 trillion increases, nominal gross national income doubles, as well as residences have approximately 280 thousand increases, and also made that employment condition also improves continuously, and diffusion ratio of house starts going up but the amount of supplies is a little bit insufficient in the long view.

• 경영과정보연구
• /
• 제22권
• /
• pp.85-115
• /
• 2007

Following is discovered in this study by some. First, attribute(product/non- product) of that truth that get through experiment of this study is WOM deduced result that have statistical meaning in dependent variable which is public trust only in this study. Specially, information by word of mouth type received High positive response more with non-product information by word of mouth attribute than the product attribute in all experiment products that is parted according to involvement. Consumer's response by involvement level of product can affect for site attitude, public trust, and intention to purchase by second. For example, consumer's site attitude has induced the most positive response, and can confirm positive response of High consumer most in that involvement sensitivity product in that participation reason type product and could confirm response that is the most positive in that involvement reason product even if there is for intention to purchase. Result of this study is grasped that have High mean value relatively in site attitude, product attitude, information by word of mouth effect, public trust, brand attitude, purchase intention etc. generally that product involvement and information by word of mouth attribute are interrelation by third. This can change fairly data processing process according to consumer's Involvement Level, behavior deterministic process, consumer's action with attitude formation process, and involvement for products. High occasion than is low incline more efforts in information retrieval and is discreet result such as study finding of produce.

• 한국환경과학회지
• /
• 제21권9호
• /
• pp.1069-1078
• /
• 2012

This study was performed to evaluate the asbestos exposure levels and to calculate excess lifetime cacer risks(ELCRs) in asbestos-containing buildings for maintenance and management. The range of airborne asbestos concentration of 33 buildings was 0.0018 ~ 0.0126 f/cc and one site exceeded indoor air-quality recommended limit 0.01 f/cc. And ELCRs based on US EPA IRIS(Integrated risk information system) model are 1.5E-06 ~ 3.9E-05 levels, and there was no site showed 1.0E-04 (one person per million) level or more, and 11 sites showed 1.0E-05 (one person per 100,000 people) level or more. To prevent the release of asbestos fibers, it needs operation and maintenance of asbestos-containing building materials, and there are some methods such as removal, repairment, enclosure and encapsulation. In conclusion, a risk-based air action level for asbestos in air is an appropriate metric for asbestos-containing building management.

• Journal of Construction Engineering and Project Management
• /
• 제6권2호
• /
• pp.1-7
• /
• 2016

Construction in the UK is the second most dangerous industry in terms of fatal and minor injuries according to the 2014 report of HSE. The use of mobile devices such as iPad, Tablets and Smart phones on the live construction projects is also on the increase in the UK due to the 2016 - Level 2 BIM (Building Information Modelling) implementation target, set by the UK Government. Hence, the use of such devices may become a distraction from work activities on the construction sites and will cause a major risk to the end users. The subject of improving safety of BIM use is widely researched, but there is a gap in knowledge about the actual use of the mobile devices and perception of 'Site BIM', on the construction site activities. The main gap identified in the 'Site BIM' is the health and safety aspect of using such devices on the construction sites. A safer way of working with such devices needs to be identified to avoid any potential site hazards and fatalities before the widespread use of the devices are found on the construction projects. In that context, the paper is aimed to highlight the safety issues that are required to address for the successful implementation of the mobile devices for safer use of the 'Site BIM'. Questionnaire survey was used to collect the site information among construction professionals in the UK. The survey findings suggested that a proactive approach may be helpful to stop potential hazards and risks causing by the use of mobile devices and potential measures need to be identified before any injuries and incidents occur. The paper concludes that training, changing size of mobile devices and ensuring a separate induction training for 'Site BIM' tools will improve the health and safety of the end users of the mobile devices at the live construction sites.