• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.1
• /
• pp.159-163
• /
• 2016

Background: Colorectal cancer (CRC) is the third most common cancer in the world, and the fourth in Iran in both genders. The aim of this study was to find predictive factors for CRC survival. Materials and Methods: Medical records of 570 patients referred to the radiotherapy oncology department of Shiraz Namazi hospital from 2005 to 2010 were retrospectively analysed. Data were collected by reviewing medical records, and by telephone interviews with patients. Survival analysis was performed using the Cox's regression model with survival probability estimated with Kaplan-Meier curve. The log-rank test was used to compare survival between strata. Data was analyzed with Stata 12. Results: The five-year survival rate and the mean survival time after cancer diagnosis were 58.5% and $67{\pm}4months$. On multivariate analysis, age of diagnosis, disease stage and primary tumor site, lymphovascular invasion and type of treatment (in colon cancer) were significant factors for survival. Conclusions: Age of diagnosis and type of treatment (adjuvant therapy in patients with colon cancer) were two modifiable factors related to survival of CRC patients. Therefore earlier diagnosis might help increase survival.

• Environmental Analysis Health and Toxicology
• /
• v.21 no.1 s.52
• /
• pp.45-56
• /
• 2006

This study was conducted to investigate seasonal distributions of fine particles ($PM_{2.5}$) and associated polycyclic aromatic hydrocarbons (PAHs) at three cities. $PM_{2.5}$ samples were collected on glass fiber filters at urban (Chuncheon), metropolitan (Seoul), and industrial complex sites (Ulsan) from September, 2002 to February, 2004 using the Andersen FH 95 Particulate Sampler. About five 24-hour samples were collected from each site per season. The filters were analyzed for mass and six selected PAHs concentrations. $PM_{2.5}$ concentrations were the highest either in winter or spring, which could be attributed to the increase of fossil fuel combustion in winter or the transport of yellow sand to the Korean peninsula from China in spring, respectively. Regional $PM_{2.5}$ concentrations were higher in the order of Seoul>Chuncheon>Ulsan without statistical difference among cities. The filters were extracted using dichloromethane in an ultrasonicator and analyzed for six PAHs (anthracene, fluoranthene, pyrene, benzo[a]anthracene, chrysene, and benzo[a]pyrene) with HPLC. Total PAHs concentrations were statistically different among seasons in each site, and the highest concentrations were observed in winter at each sampling site. For total samples collected, the median total PAHs concentrations in Chuncheon ($4.6ng/m^3$) and Seoul ($4.4ng/m^3$) were approximately two times higher than that in Ulsan ($2.1ng/m^3$). Chrysene was a component found in the highest proportion among total PAHs at each site. Carcinogenic risks calculated based on the BaP toxic equivalency factors (TEFs) over the whole sampling period were higher in the order of Chuncheon>Seoul>Ulsan. This study suggests that the atmosphere of Chuncheon is contaminated with particulate matter and PAHs at the levels equivalent to those of Seoul and that an appropriate measure needs to be taken to mitigate human health risks from inhalation exposure to airborne fine particles.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.1
• /
• pp.69-84
• /
• 2023

Despite the continuous installation and regular inspection of waste treatment facilities, complaints about excessive incineration and illegal dumping stench continue to occur at on-site treatment facilities. In addition, field surveys were conducted on the waste treatment facilities currently in operation (6 type) to understand the waste treatment process for each field, to grasp the main operating factors applied to the inspection. In addition, we calculated the material·energy balance for each main process and confirmed the proper operation of the waste disposal facility. As a result of the site survey, in the case of heat treatment facilities such as incineration, cement kilns, and incineration heat recovery facilities, the main factors are maintenance of the temperature of the incinerator required for incineration and treatment of the generated air pollutants, and in the case of landfill facilities Retaining wall stability, closed landfill leachate and emission control emerged as major factors. In the case of sterilization and crushing facilities, the most important factor is whether or not sterilization is possible (apobacterium inspection).In the case of food distribution waste treatment facilities, retention time and odor control during fermentation (digestion, decomposed) are major factors. Calculation results of material balance and energy resin for each waste treatment facility In the case of incineration facilities, it was confirmed that the amount of flooring materials generated is about 14 % and the amount of scattering materials is about 3 % of the amount of waste input, and that the facility is being operated properly. In addition, among foodwaste facilities, in the case of an anaerobic digestion facility, the amount of biogas generated relative to the amount of inflow is about 17 %, and the biogas conversion efficiency is about 81 %, in the case of composting facility, about 11 % composting of the inflow waste was produced, and it was comfirmend that all were properly operated. As a result, in order to improve the inspection method for waste treatment facilities, it is necessary not only to accumulate quantitative standards for detailed inspection methods, but also to collect operational data for one year at the time of regular inspections of each facility, Grasping the flow and judging whether or not the treatment facility is properly operated. It is then determined that the operation and management efficiency of the treatment facility will increase.

• Environmental Engineering Research
• /
• v.18 no.1
• /
• pp.3-8
• /
• 2013

Collision cell technology-inductively coupled plasma-mass spectrometry (CCT-ICP-MS) was used to measure the concentrations of approximately 19 elements associated with airborne PM2.5 samples that were collected from a roadside sampling station in Daejeon, Korea. Standard reference material (SRM 2783, air particulate on filter media) of the National Institute of Standards and Technology was used for the quality assurance of CCT-ICP-MS. The elemental concentrations were compared statistically with the certified (or recommended) values. The patterns of distribution were clearly distinguished between elements with their concentrations ranging over four orders of magnitude. If compared in terms of enrichment factors, it was found that toxic trace elements (e.g., Sb, Se, Cd, As, Zn, Pb, and Cu) of anthropogenic origin are much more enriched in PM2.5 samples of the study site. To the contrary, the results of the correlation analysis showed that PM2.5 concentrations can exhibit more enhanced correlations with the elements (e.g., Fe, K, Si, and Ti) arising from earth's crust. The findings of strong correlations between PM2.5 and the elements of crustal origin may be directly comparable with the dominant role of those species by constituting a major fraction of even PM2.5 as well as PM10 at the roadside area.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.4
• /
• pp.531-540
• /
• 2019

Existing dozer productivity computation models use different input variables, formulas, productivity correction factors, and experimental data source. This paper presents a method that characterizes the productivity outputs obtained by the PLS model and the Caterpillar model that are accepted as industry standards. The method identifies the input variables to be collected from the site, the performance charts to be referenced, and the formulas and implements them in a single computational tool. This study verifies that the PLS model may replace the manual computational process of Caterpillar model by eliminating reliance on graphics manipulation. Replacing the Caterpillar model with the PLS model and implementing the process as a function contributes to assess the productivity of a dozer timely by encouraging to utilize real-time information collected directly from the site. This study allows researchers and practitioners to effectively deal with the values of productivity correction factors collected from the job site and to control the productivity. The practicality and effectiveness of the method have been validated by applying to a project case.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.5
• /
• pp.671-679
• /
• 2022

Harmful factors such as shock waves and fragments are generated at domestic ammunition testing sites and military shell shooting training sites due to frequent shooting and explosion tests. As a result, complaints from local residents are rapidly increasing, and there is a high risk of damage to facilities and human life. The recently constructed ammunition test site built a test facility for firing artillery and rocket propulsion in a narrow area with a radius of 300 m due to site restrictions, but damage to the facility is accumulating because there is no adequate protective structure. Therefore, in this study, quantitative data on harmful factors such as noise, vibration, shock wave, and thermal effect generated between artillery firing and rocket propulsion tests were measured, and explosion pressure characteristics were analyzed to design a protective structure, and use Autodyn to protect performance. to perform verification.

• Korean Journal of Construction Engineering and Management
• /
• v.8 no.1 s.35
• /
• pp.107-115
• /
• 2007

Today's human life is more conveniently advantaged and abundant as industrial society advanced. However, the development has been creating a serious environmental crisis. Environmental pollution and exhaustion of natural resources recently became an important issue in construction industry as well as the concern about construction waste management and recycling the resources has arisen. Because the industrial wastes are not only increased quantitatively but also qualitatively intricate and various, groping for ways of reducing the use of resources primarily and recycling is urged on promotion. Currently, only about 33% of the wood wastes produced in construction site are recycled and the others are incinerated or disposed through irregular circulation process. In this study, I will investigate the present status of generating, processing, and recycling construction wood wastes and compare domestic disposal trend to other countries. In addition, I will analyze the actual condition of processing wood wastes in the construction site, verify the irrational causes, and simplify anomalous factors for the purpose of more efficient and correct activation of wood waste treatment and recycling on construction field and protection of environment in the long run.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.12
• /
• pp.45-58
• /
• 2017

As many seismic codes for various facilities are changed into a performance based design code, demand for a reliable nonlinear response-history analysis (RHA) arises. However, the equivalent linear analysis has been used as a standard approach since 1970 in the field of site response analysis. So, the reliability of nonlinear RHA should be provided to be adopted in replace of equivalent linear analysis. In this paper, the reliability of nonlinear RHA is reviewed for a layered soil layer using Loma Prieta earthquake records in 1989. For this purpose, the appropriate way for selecting nonlinear soil models and the effect of base boundary condition for 3D analysis are evaluated. As a result, there is no significant differences between equivalent linear and nonlinear RHA. In case of 3D analysis, absorbing boundary condition should be applied at base to prevent rocking motion of the whole model.

• Journal of Environmental Science International
• /
• v.20 no.9
• /
• pp.1205-1212
• /
• 2011

As serving people's activities, pedestrian road systems are basic and necessary facilities in urban structure. To provide and utilize these pedestrian road systems in residential area would enhance urban environment as well as quality of life. For this reason, pedestrian road should be planned by consideration of people's activity in residential area. Evaluation of existing pedestrian road should be also oriented how people use it and what people do in it. This study amis to investigate functions of pedestrian road system throughout evaluation of user's satisfaction in order to improve better pedestrian road system in residential area. The purposes of this study are to analyze components of factors affecting on user's satisfaction, and to find the relationship among affecting factors. For this study, the on-site questionnaire method was applied to 267 individuals who were collected as the study areas where locate Toyogaoka and Kaidori, Japan. The collected data were clarified exploratory factors, and analyzed relationship between the factors and satisfaction by applying quantitative statistical techniques for the mapping investigation, Mann-Whitney u-test, and correlation. The results of this study are follows. The pedestrian road system is more preferred than surroundings of vehicle roads in residential district area where maintains pedestrian road as open space. In addition, satisfactions of the pedestrian road for each purpose were highly evaluated, because of conformability and convenience for usage. Consequently, the pedestrian road which is secure and greening as an open space is well carried out for the living circulation of residents. It would suggest that pedestrian road have to be managed and planned not a function of circulation but an open space system.

• Journal of Environmental Science International
• /
• v.12 no.7
• /
• pp.753-762
• /
• 2003

Butyltin compounds (BTs), namely tributyltin (TBT), dibutyltin (DBT) and monobutyltin (MBT), were measured in surface sediments collected in 2001 inside Hallim Harbor where a lot of shipping occurs as one of major harbors of Jeju Island, in order to evaluate their distribution. BTs were detected in surface sediments of all stations and their concentrations were comparable to those in surface sediments of other sites of domestic and foreign countries. The main species among BTs was MBT, although there was a little difference with a survey site. No correlations were obtained between organic matter or particles size of surface sediments and total BTs, indicating that these factors did not affect on the distribution of BTs. It was estimated that more complex factors including BTs loads and surrounding sedimentary environments, affected on the distribution of BTs. The high correlations between BTs indicated that DBT and MBT were mainly degraded from TBT based on antifouling paints of vessel etc. and other sources, such as DBT and MBT, could be ignored. The butyltin degradation indexes ([DBT] + [MBT]/[TBT]) Ivere in the range of 1.5∼3.3 (mean 2.5), indicating that the parent compound, TBT, were inflowed into the surface sediments a long years ago and degraded.