• 상하수도학회지
• /
• 제31권3호
• /
• pp.237-248
• /
• 2017

The estimation method of economical leakage management target utilized upon planning business for improvement of revenue water ratio in South Korea is presented and applicability of methods developed in this study is assessed through application on site. With a consideration of revenue water ratio in application target area, estimation method of long-term economical leakage management target is applied. Three leakage reduction methods such as replacement of residual aged pipe, leakage investigation and restoration and water pressure management are applied with a consideration of characteristics of site. Due to difficulty of obtaining data, analysis of cost/benefit by leakage reduction methods is performed by applying method of leakages estimation equation among statistical methods. As a result of application, revenue water ratio corresponding to long-term economical leakage management target is 91.6 %.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권10호
• /
• pp.3750-3770
• /
• 2021

This study investigates open-source dynamic XSS filters used as security devices in web applications to account for the effectiveness of filters in protecting against XSS attacks. The experiment involves twelve representative filters, which are examined individually by placing them into the final output function of a custom-built single-input-form web application. To assess the effectiveness of the filters in their tasks of sanitizing XSS payloads and in preserving benign payloads, a black-box testing method is applied using an automated XSS testing framework. The result in working with malicious and benign payloads shows an important trade-off in the filters' tasks. Because the filters that only check for dangerous or safe elements, they seem to neglect to validate their values. As some safe values are mistreated as dangerous elements, their benign payload function is lost in the way. For the filters to be more effective, it is suggested that they should be able to validate the respective values of malicious and benign payloads; thus, minimizing the trade-off. This particular assessment of XSS filters provides important insight regarding the filters that can be used to mitigate threats, including the possible configurations to improve them in handling both malicious and benign payloads.

• 한국건설안전학회 논문집
• /
• 제4권1호
• /
• pp.16-21
• /
• 2021

최근 건설업의 높은 재해율을 저감하기 위한 노력의 일환으로 스마트 안전관리 기술의 현장 도입이 시도되고 있으며, 이와 관련한 제도적인 개선이 일부 이뤄지고 있다. 본 연구에서는 이러한 개선된 제도의 효용성 파악 및 스마트 안전관리 기술의 현장 적용 확산을 위한 추가 개선점을 도출하기 위해 수행되었다. 건설업에 종사하는 참여자를 대상으로 설문조사를 수행하였고, 개선된 제도의 인지 및 건설현장에서 스마트 안전 기술을 확산하기 위해 필요한 항목을 조사하였다. 조사 결과 스마트 건설안전의 현장 적용에 대한 높은 관심을 확인할 수 있었고, 안전관리비의 및 현장 안전 서류업무 중복 문제 등을 제기하였다. 본 연구를 통해 도출된 의견은 향후 스마트 건설안전 기술의 도입·확산을 위한 제도적 개선의 기초자료로 활용될 것이다.

• 한국안전학회지
• /
• 제39권1호
• /
• pp.41-54
• /
• 2024

Efforts to reduce on-site safety incidents have expanded, leading to active research in this domain. However, a systematic analysis to improve the utility of technology is lacking. In this study, we conducted a survey on the various institutional and technical improvement measures to promote the application of smart construction safety technology over three years after the implementation of the "Smart Safety Equipment Support Project." The results showed that financial constraint was the primary obstacle in the adoption of this innovation. Fostering a flexible environment in the utilization of management fees and financial support of projects was determined to aid in the extensive application of the technology. Ensuring cost efficiency and user-friendliness were principally necessary for technical enhancements in the smart construction safety technology. Technologies, such as VR/AR safety education, real-time location tracking, wearable devices, and innovation on streamlining safety-related work efficiency, had been anticipated to contribute to on-site safety. Operating a smart safety control center was expected to be beneficial in the systematic securing of data and reduction of safety blind spots. Effective methods had been suggested to overcome the barriers that hindered the development and application of smart construction safety technology. This study facilitates in the technological improvements in this field.

• 산업공학
• /
• 제17권1호
• /
• pp.33-45
• /
• 2004

In the web environment for general information seeking and business-to-customer and business-to-business electronic commerce, users are customers. Understanding their expectations and how they feel about the web sites they use is becoming a very serious concern. While the success of a company or an organization is dependent on many factors, its web site plays a central role. This paper described the use of WebQual2.0 to evaluate the various web sites of B2B and B2C. WebQual2.0 has been extended and refined to encompass an interaction-quality literature. Furthermore, this paper described the use of Kano model to evaluate the various web sites which classified by internet business types. The result showed that the inherent characteristics of B2B and B2C web site should be considered in initial site construction. Further, customers in a web domain do not regard all quality factors as equally important and the rankings of important quality factors differ from one web domain to another. This study was focused on the identifying the weights of web quality factors according to the each web site of the internet business types.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.109.2-109.2
• /
• 2011

A photovoltaic system is getting the spotlight for a environment-friendly energy source. But its location is limited because a lot of land is necessary for photovoltaic arrays. Nevertheless, its dissemination is rapidly increasing more than 40 % every year and exceeded about 400 MW in 2009. The radical growth of a photovoltaic system aggravated a lack of sites, so that forests and farmland were destroyed. It is demanded to make use of a vacant lot or little piece of land for the way to solve the lack of sites and improve the location requirements for a photovoltaic system. General photovoltaic arrays are consist of a single layer structure and needs enough separation distances to maximize the amount of solar radiation and to eliminate influences by the shadow of other arrays. So that a large amount of land is required for the site. The solar cell arrays with long separation distances can not be placed in a small vacant lot and its site application efficiency is low. This study optimized photovoltaic arrays as multilayered structure with movable sleeves for the efficient photovoltaic in a small site. The existing photovoltaic arrays with a single layer structure were fixed or tracking systems. In this experimental equipment, photovoltaic arrays attached to the multilayers have rectilinear movement and rotary motion using sleeves. Therefore, shadow influences were removed and the generation capacity was improved. On the simulation result, generation increased by about 30% in the same site considering shadow influences and so on.

• 시스템엔지니어링학술지
• /
• 제9권1호
• /
• pp.55-63
• /
• 2013

Nuclear power plant site selection is a complex process and its successful completion is a critical milestone in the NPP development cycle. Proper siting of NPP will ensure public health and safety, environmental conservation, reduced project failure risks and a smooth NPP development process among other benefits. The objective of this paper is to demonstrate the application of systems engineering to the problem of NPP siting in Kenya. The siting process demonstrated in this paper includes stakeholder need analysis where stakeholders are identified and their needs concerning NPP site are elicited and converted into system functional requirements. A value model is then developed and potential sites iteratively subjected to three types of criteria i.e. exclusionary criteria, avoidance criteria and suitability criteria. This process is used to identify the candidate sites. An additive value model; multiple objectives Decision Analysis (MODA) is then used to calculate candidate solutions values. The site with the highest solution value score is selected. Sensitivity studies using different criterion weight sets (thereby reflecting different viewpoints) can be conducted to assess their effect on the selection of a preferred site and thereby lend additional credibility to the decision process.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1216-1223
• /
• 2008

Displacement control of earth retaining wall is recognized as the most important item for insuring the stability of ground in urban deep excavation site near by major structure such as subway etc. The field monitoring system is classified by two types as manual system and automatic system. The application case of latter type of field monitoring is increased because real time measurement is possible in automatic system and that is correspondent with the recent constructional trend. Though the automatic monitoring system is more useful and advanced than manual monitoring system, accuracy of the system is not verified sufficiently. It was examined that the reliance of automatic monitoring system in this paper through the comparison of monitoring result obtained three urban excavation site in which the each type of monitoring system was executed concurrently. Result of the examination is that the two types of monitoring system is generally alike in view of monitoring result, so the engineering reliance of automatic system was confirmed in case site. This task was researched in restricted case site, it is expected more precise analysis from security of more data monitored and progressive study.

• 한국디지털건축인테리어학회논문집
• /
• 제9권3호
• /
• pp.69-76
• /
• 2009

The importance of efficient construction site management has been growing as the amount of construction information increases which is used in the growing construction site. Accordingly in this study, we are trying to find out the application situation and possibility of BIM through theoretical examination and domestic & overseas case study of BIM and we are trying to suggest the way of efficient construction site management formulation through implementation phase-oriented and cooperation entity-oriented analysis in the construction site. We found out that it was possible to minimize time loss and financial loss by visualizing 2D drawings through 3D modeling of target building by applying BIM and that it was possible to improve accuracy of budget planning with quantitative information of 3D model, to plan construction process with more confidence due to accurate architectural information of drawings and quantitative information, and to manage cost and quality through process management based on construction information acquired by BIM including object information by part. It is concluded that we can improve efficiency of construction management between field and each cooperating entity by integrating and linking BIM information through this process.

• 대한토목학회논문집
• /
• 제13권4호
• /
• pp.189-197
• /
• 1993

도시지역내 쓰레기 매립지의 관리문제는 지방 자치단체와 도시 주민에게 있어 중요한 관심사로 대두되었다. 계속되는 쓰레기 매립지의 수용력 감소와 기존 쓰레기 매립지에 관련한 시민의 공중보건 및 환경 문제에 대한 자각은 쓰레기 매립지 선정과정에 있어서의 제약 요인으로 새롭게 제기되었다. 위치선정 과정상에는 그 밖에도 부가적인 제약 요인으로서의 사회적, 기술적 측면의 문제와 함께 계획과 보상비용 증가라는 문제가 복잡하게 얽혀있다. 적지선정에 과정에 지형공간정보시스템의 공간 데이터베이스 환경과 각종의 모델링 기능을 연결함으로써 대상지내의 쓰레기 매립 개발 적지 및 후보지선정을 빠른 시간내에 적은 비용으로 수행할 수 있을 것으로 판단된다.