• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.86-88
• /
• 2004

This paper deals with the comparison and analysis for open-circuit field of PM(permanent magnet) machines with Halbach and circumferential magnetized rotor. The governing equation is derived in terms of magnetic vector potential and 2-d polar coordinate. And then, analytical results has been verified by comparison with those obtained from FE(finite element) method. On the basis of 2-d analytical results, this paper confirms that PM machines with circumferential magnetized rotor is superior to it with Halbach magnetized rotor in terms of magnitude and sinusoidal wave-forms of flux density due to PM and required magnet volume.

• 한국정밀공학회지
• /
• 제15권10호
• /
• pp.165-171
• /
• 1998

An axial electromagnetic levitation system using attractive force is a highly nonlinear system due to the nonlinearity of materials, variable air gap and flux density. To control the levitating system with large air gap, a conventional PID control based on the linear model is not satisfactory to obtain the desired performance and the position tracking control of the sinusoidal motion by simulation results. Thus, sliding mode control(SMC) based on the input-output linearization is suggested and evaluated by simulation and experimental approaches. Usefulness of the SMC to this system is conformed experimentally. If the expected variation of added mass can be included in the gain conditions and the model, the position control performance of the electromagnetic levitation system with large air gap will be improved with robustness.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.857-860
• /
• 2006

It is important to diminish noise source of an electric motor used in appliances. We studied on the noise reduction of BLDC motor to drive a fan. Especially, this study was focused on detent torque caused by interaction between a permanent magnet of rotor and groove in stator. This source and rotating system brought about a resonance. This paper showed that the higher harmonic component of this torque had a main factor to lessen noise. So, we had designed new magnets with shape like a peanut and pseudo-sinusoidal flux density for low-noise BLDC motor in refrigerator.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.114-119
• /
• 2004

Floating marina has been interests as an alternative to the facilities for recreational boats because of its cost effectivenes and less environmental conflicts. For tile present research, a square floating marina with a length of 400m and draft of 5m was used. This marina can be extended to 800m by putting anotjer one together. Tidal field around tile marina was simulated using a multi-level finite difference method. Tidal motion was assumed sinusoidal in a closed rectangular bay. Velocities and residual current were investigated for two cases of single marina and two marinas installed in tile bay. It was found that the horizontal velocity fields from the water surface to the structure bottom around tile marina were affected. In the marina basin, magnitude of velocity was reduced considerably but overall quality of water circulation was preserved even after two marina were installed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.650-652
• /
• 2000

Proposed slotless PM machine is constructed without stator winding slots. Its stator magnetic material is in the form of a ring and winding have a toroidal configuration and its rotor consists of a 4-pole Halbach array or radially magnetized PM rotor. Thus, airgap flux density distribution and induced emf waveform are essentially sinusoidal. Open circuit magnetic fields and developed torque of each type are presented from the analytical method and finite element method.

• Journal of Magnetics
• /
• 제22권2호
• /
• pp.306-314
• /
• 2017

Nowadays power quality effects on induction motors have gained significant attention due to wide application of these motors in industry. The impact of grid voltage fluctuations on the induction motor behavior is one of the important issues to be studied by power engineers. The degree of iron saturation is a paramount factor affecting induction motors performance. This paper investigates the effects of voltage fluctuations on motor magnetic saturation based on the harmonic content of airgap flux density by finite element method (FEM). It is clarified that the saturation harmonics under normal range of voltage fluctuations have not changed significantly with respect to pure sinusoidal conditions. Experimental results on a 1.1 kW, 380 V, 50 Hz, 2 pole induction motor are employed to validate the accuracy of the simulation results.

• Journal of Power Electronics
• /
• 제19권6호
• /
• pp.1536-1543
• /
• 2019

This paper presents an improved torque predictive control (TPC) for permanent magnet synchronous motors (PMSMs) using an indirect matrix converter (IMC). The IMC has characteristics such as a high power density and sinusoidal waveforms of the input-output currents. Additionally, this configuration does not have any DC-link capacitors. Due to these advantages of the IMC, it is used in various application field such as electric vehicles and railway cars. Recently, research on various torque control methods for PMSM drives using an IMC is being actively pursued. In this paper, an improved TPC method for PMSM drives using an IMC is proposed. In the improved TPC method, the magnitudes of the voltage vectors applied to control the torque and flux of the PMSM are adjusted depending on the PMSM torque control such as the steady state and transient response. Therefore, it is able to reduce the ripples of the output current and torque in the low-speed and high-speed load ranges. Additionally, the improved TPC can improve the dynamic torque response when compared with the conventional TPC. The effectiveness of the improved TPC method is verified by experimental results.

• 전력전자학회논문지
• /
• 제12권4호
• /
• pp.318-323
• /
• 2007

본 논문에서는 영구자석형 5상 전동기(Five-phase permanent magnet motor)의 약계자 제어에 대한 연구를 수행한다. 제안된 전동기는 집중권 방식의 권선분포를 가지고 있고 사다리꼴 형태의 역기전력을 나타내고 있으며, 사다리꼴 형태의 전류를 인가하기 위하여 사인파의 기본파 성분에 3고조파 성분을 첨가하였다. 따라서 BLDC 전동기(Brushless dc motor)와 등가적으로 같은 평균토크를 발생시키면서 BLDC 전동기의 단점을 극복할 수 있었다. 전동기 전류의 토크성분과 자속성분은 다중 레퍼런스 프래임을 이용하여 분리할 수 있었으며, 결과적으로 쉽게 벡터제어가 이루어질 수 있었다. 사용된 전동기는 고속영역에서부터 저속영역까지 BLDC 전동기와 같이 높은 토크 밀도를 가지며, 약계자 영역이나 고속영역에서 영구자석형 전동기와 같이 제어의 용이함을 가진다는 장점을 가지고 있으며 실험결과를 통하여 제안된 전동기와 알고리즘을 검증하였다.